try something like what you already have
where "/home/win" is an already exisiting knoppix directory. Although the error you are getting says the FAT16 filesystem is already broken. Can you boot from a windows disk and then try chkdsk on hda5? Is hda5 configured as the boot disk for the system?
Hi...
question is this:
How do I mount an LVD hotswap scsi drive in bay #2 on a netra using the mount command? volmgt doesn't seem to mount it and/or I don't know how to view the drives data if it's formatted which it may not be. This drive is not new out of the box so I'm not sure.
... (4 Replies)
Hey, need to mount the following below, and new ish to unix.. what is the process.. thanks :b:
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SEAGATE-ST973401LC-0001 cyl 51057 alt 2 hd 4 sec 702>
/pci@1d,700000/scsi@4/sd@0,0 (5 Replies)
Hi,
We encountered NFS issue (solaris) especially running on Oracle application. Problem such as forms hang when close button is click, concurrent job shows running status all time.
Understand we need to use mount -o llock -F nfs instead of mount -F nfs to eliminate? this problem..
Can... (1 Reply)
Hi all,
I would like to know how to use the format command?
I mean i essentially want to mount my windows drives here...
For which i needed to know there readings!!!
When i tried to do format i was offered one disk(obviously),that was
c1d0
i selected that...
and choose partitions (twice... (1 Reply)
I am having trouble mounting with cifs, but mounting the exact same command with smbfs works fine. The share is on another samba server and is set to full public guest access. # mount -t cifs //servername/sharename /mnt/temp -o password=""
mount error 13 = Permission denied Refer to the... (3 Replies)
Hello,
I have a few Ubuntu 9.10 laptops I'm trying to learn NFS sharing with. I am just experimenting on this right now, so no harsh words about the security of what I'm playing with, please ;)
Below are the configs
/etc/exports on host
/home/woodnt/Homeschool... (2 Replies)
Heyas
At home i have 1 nas with 3 shares, of which i used to mount 2 of them using a script with hardcoded password and username in it.
EDIT: Turns out, its not the script, but 'how i access' the nas share.. (-o user=XY,password=... VS. -o credentials=...).
Figured about credential files,... (0 Replies)
How to create a new mount point with 600GB and add 350 GBexisting mount point
Best if there step that i can follow or execute before i mount or add diskspace IN AIX
Thanks (2 Replies)
Discussion started by: Thilagarajan
2 Replies
LEARN ABOUT OSF1
installboot
installboot(1M)installboot(1M)NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)