Hey,
I have few Questions :
1. How to Check/Find who all are the users accessing the server using their id ?
2. How to Check who is the active user or non active user (whose id exists but the access privileges has been removed) ?
I am presently using AIX5.3 as a server.
Please suggest... (3 Replies)
Hi all,
I am new to HACMP. So sorry for the newie question. But I did search the forum and it seems that no one asks this before.
So if a 2-node cluster runs in active-active mode (and the same application), what is the benefit of using HACMP ?
If it runs in active-stanby, it is easy to... (9 Replies)
I am a linux newbie and I am learning. I need a script that will monitor a port and if active -- only active, not listening or waiting -- then pipe some commands to the screen as if they were typed on the keyboard. Can a bash or perl script do this and if so, could someone help me out?
Thanks. (0 Replies)
is there a better way to check if a port is active on linux and sunos systems?
this is currently what I'm using in my script:
netstat -an | egrep -i "$PORT"
i know this isn't the best way as there could be numbers in that output that has my port number in it but isn't necessarily a... (0 Replies)
Hi,
I need to configure 4 ip address (same subnet and mask) in one ipmp group (two interfaces) in an active active formation (link based). Can some one provide the steps or a tutorial link.
Thanks (2 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
#!/bin/bash
for digit in $(seq 1 10)
do
if ping -c1 -w2 192.168.1.$digit &> /dev/null
then
echo "192.168.1.$digit is UP"
else
echo "192.168.1.$digit is DOWN"
fi
done (3 Replies)
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
LEARN ABOUT SUSE
ttysnoop
TTYSNOOP(8) BSD System Manager's Manual TTYSNOOP(8)NAME
ttysnoop -- snoop on a user's tty
SYNOPSIS
ttysnoop [pty]
ttysnoops
DESCRIPTION
The ttysnoop / ttysnoops client-server combo can be used to snoop (watch) on a user's login tty. The server (ttysnoops) is usually started
by getty(8) or telnetd(8) and reads the file /etc/snooptab to find out which tty's should be cloned and which programs to run on them (usu-
ally /bin/login). A tty may be snooped through a pre-determined (ie. fixed) device, or through a dynamically allocated pseudo-tty (pty).
This is also specified in the /etc/snooptab file. To connect to the pty, the client ttysnoop should be used. The available pseudo terminals
pty are present as sockets in the directory /var/spool/ttysnoop/.
Format of /etc/snooptab
The /etc/snooptab file may contain comment lines (starting with a '#'), empty lines, or entries for tty's that should be snooped upon. The
format of such an entry is as follows:
tty snoop-device type program
where tty is the leaf-name of the tty that should be snooped upon (eg. ttyS2, not /dev/ttyS2) OR the wildcard '*', which matches ANY tty.
snoop-device is the device through which tty should be snooped (eg. /dev/tty8) OR the literal constant "socket". The latter is used to tell
ttysnoops that the snoop-device will be a dynamically allocated pty. type specifies the type of program that should be run, currently recog-
nized types are "init", "user" and "login" although the former two aren't really needed. Finally, program is the full pathname to the program
to run when ttysnoops has cloned tty onto snoop-device.
EXAMPLE
The following example /etc/snooptab file should illustrate the typical use of ttysnoop / ttysnoops:
#
# example /etc/snooptab
#
ttyS0 /dev/tty7 login /bin/login
ttyS1 /dev/tty8 login /bin/login
#
# the wildcard tty should always be the last one in the file
#
* socket login /bin/login
#
# example end
#
With the above example, whenever a user logs in on /dev/ttyS0 or /dev/ttyS1, either tty will be snooped through /dev/tty7 or /dev/tty8
respectively. Any other tty's will be snooped through a pty that will be allocated at the time of login. The system-administrator can then
run ttysnoop pty to snoop through the pty. Note that it is up to the system-administrator to setup getty and/or telnetd so that they execute
ttysnoops instead of /bin/login.
SEE ALSO getty(8), telnetd(8)FILES
/etc/snooptab
BUGS
The program is unable to do any terminal control-code translations for the original tty and the snoop-device. I doubt it will ever do this.
AUTHOR
Carl Declerck, carl@miskatonic.inbe.net
BSD August 8 1994 BSD