Port Active? Post: 302481836

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Active / Non Active users ?

Hey, I have few Questions : 1. How to Check/Find who all are the users accessing the server using their id ? 2. How to Check who is the active user or non active user (whose id exists but the access privileges has been removed) ? I am presently using AIX5.3 as a server. Please suggest...

2. AIX

Question about HACMP for active-active mode

Hi all, I am new to HACMP. So sorry for the newie question. But I did search the forum and it seems that no one asks this before. So if a 2-node cluster runs in active-active mode (and the same application), what is the benefit of using HACMP ? If it runs in active-stanby, it is easy to...

3. Shell Programming and Scripting

Monitor Port, if active, pipe command to screen

I am a linux newbie and I am learning. I need a script that will monitor a port and if active -- only active, not listening or waiting -- then pipe some commands to the screen as if they were typed on the keyboard. Can a bash or perl script do this and if so, could someone help me out? Thanks.

4. Shell Programming and Scripting

Script to check if Port is Active

is there a better way to check if a port is active on linux and sunos systems? this is currently what I'm using in my script: netstat -an | egrep -i "$PORT" i know this isn't the best way as there could be numbers in that output that has my port number in it but isn't necessarily a...

5. Solaris

Link based Active Active IPMP

Hi, I need to configure 4 ip address (same subnet and mask) in one ipmp group (two interfaces) in an active active formation (link based). Can some one provide the steps or a tutorial link. Thanks

6. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

7. Shell Programming and Scripting

How do I calculate total number of active and non active hosts?

#!/bin/bash for digit in $(seq 1 10) do if ping -c1 -w2 192.168.1.$digit &> /dev/null then echo "192.168.1.$digit is UP" else echo "192.168.1.$digit is DOWN" fi done

8. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

9. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

LEARN ABOUT OPENDARWIN

upsd.conf

UPSD.CONF(5)							    NUT Manual							      UPSD.CONF(5)

NAME

       upsd.conf - Configuration for Network UPS Tools upsd

DESCRIPTION

       upsd uses this file to control access to the server and set some other miscellaneous configuration values. This file contains details on
       access controls, so keep it secure. Ideally, only the upsd process should be able to read it.

CONFIGURATION DIRECTIVES

       "MAXAGE seconds"
	   upsd usually allows a driver to stop responding for up to 15 seconds before declaring the data "stale". If your driver takes a very
	   long time to process updates but is otherwise operational, you can use MAXAGE to make upsd wait longer.

	   Most users should leave this at the default value.

       "STATEPATH path"
	   Tell upsd to look for the driver state sockets in path rather than the default that was compiled into the program.

       "LISTEN interface port"
	   Bind a listening port to the interface specified by its Internet address. This may be useful on hosts with multiple interfaces. You
	   should not rely exclusively on this for security, as it can be subverted on many systems.

	   Listen on TCP port port instead of the default value which was compiled into the code. This overrides any value you may have set with
	   configure --with-port. If you don't change it with configure or this value, upsd will listen on port 3493 for this interface.

	   Multiple LISTEN addresses may be specified. The default is to bind to 127.0.0.1 if no LISTEN addresses are specified (and ::1 if IPv6
	   support is compiled in).

	       LISTEN 127.0.0.1
	       LISTEN 192.168.50.1
	       LISTEN ::1
	       LISTEN 2001:0db8:1234:08d3:1319:8a2e:0370:7344

	   This parameter will only be read at startup. You'll need to restart (rather than reload) upsd to apply any changes made here.

       "MAXCONN connections"
	   This defaults to maximum number allowed on your system. Each UPS, each LISTEN address and each client count as one connection. If the
	   server runs out of connections, it will no longer accept new incoming client connections. Only set this if you know exactly what you're
	   doing.

       "CERTFILE certificate file"
	   When compiled with SSL support, you can enter the certificate file here. The certificates must be in PEM format and must be sorted
	   starting with the subject's certificate (server certificate), followed by intermediate CA certificates (if applicable_ and the highest
	   level (root) CA. It should end with the server key. See docs/security.txt or the Security chapter of NUT user manual for more
	   information on the SSL support in NUT.

SEE ALSO

       upsd(8), nutupsdrv(8), upsd.users(5)

INTERNET RESOURCES

       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

Network UPS Tools						    05/21/2012							      UPSD.CONF(5)