Raid 0 on database server Post: 302481459

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

2-Ch RAID Problem in SCO Open Server

Help, if possible. In SCO Open Server with installation of two-channel RAID controller the following happens: on the channel 0 disk array is seen by an operational system, and on the channel 1 array is not seen (simultaneously). That is the operational system can not simultaneously use more than...

2. Filesystems, Disks and Memory

Adding RAID to server

Hi, I have a server that I am adding a RAID that we purchased to. The server works fine. It is running Fedora 7 and is a Dell Precision 690. When the RAID is attached, it boots up and says the following: Controller Bus #00, Device#1F, Function#02: 00 Ports No device found AHCI BIOS not...

3. Red Hat

linux server with raid controller card

I am planning on building a fedora box with raid controller (database server). Is anybody done that ? also what kind of software do you need to backup and recover data.

4. UNIX for Dummies Questions & Answers

efficient raid file server

I need to put together a RAID1 file server for use by Windoze systems. I've built zillions of windows systems from components. I was a HPUX SE for a long time at HP, but have been out of the game for years. I've got an old workhorse mobo FIC PA-2013 with a 450 MHz K6 III+ I could use, but I'd...

5. Hardware

Hardware RAID on Sun T2000 Server

Hi All I have a Sun T2000 server. Couple of years ago I had configured and mirrored the boot drive with an other drive using hardware RAID 1 using raidctl command. Following is the hardware RAID output. root@oracledatabaseserver / $ raidctl RAID Volume RAID RAID Disk...

6. Linux

Help Setting up Linux Raid Server

I just built a home computer with 3TB hard drives I wanted to set up in a RAID 5 and load Ubuntu server onto it. The first thing I did was set up the drives in a RAID 5 using just the motherboard chipset software to do it, so a 'hardware' RAID basically. I installed Windows first to see if...

7. Solaris

Checking RAID health, metastat returns "no database"

Hello, I am supposed to check the RAID health of a system but when I type metastat it says "there are no existing databases" Does this mean that there is no RAID configured at all? Is there any other utility I should try? I know the system has two disks. Tanks!

8. Hardware

3ware RAID server

We have a 3ware RAID server at work, and as the appointed systems administrator (by virtue of being the one with the most knowledge) I've taken on the job of maintaining it. I've installed smartmontools on it to keep an eye on the drives and run scans every day, and looking at the data from the...

9. SCO

Backup/RAID of HD on Old UNIX Server

I need to be able to make a backup image of an OLD UNIX server HD where I can restore the complete HD from scratch if (when) the HD fails. This server runs the accounting system for a company. I can and have backed the data up via local FTP, but O/S and Apps are so old that I am not sure I could...

10. UNIX and Linux Applications

Is it mandatory or not to stop/start Applcation server ehen Restarting Database Server?

Good afternoon I need your help please. There is a Mantenance Windos which needs to Restart de Database Server 192.x.x.97 to set up some configuration Is it mandatory or not to stop/start Applcation server that runs in 192.x.x.95 ? Is it mandatory or not to stop/start apache and Tomcat?...

LEARN ABOUT DEBIAN

edb-sqlite

edb-sqlite(7)															     edb-sqlite(7)

NAME

       edb-sqlite - eurephia SQLite3 database driver

DESCRIPTION

       The  edb-sqlite	database driver is used to enable SQLite3 database in eurephia.  The SQLite3 database is file based and requires no server
       setup at all.

       The database driver takes only one argument, which is a full path to the database file.b

EXAMPLES

       eurephia-auth - This is configured via the OpenVPN configuration file.

	      plugin eurephia-auth.so "-i edb-sqlite.so -- <full path to database file>"

	      Plese notice the double dashes.  They are separating the arguments between the eurephia-auth module and the database driver.

       eurephia_init - This is set via the command line

	      user@server:~ $ eurephia_init --database-driver edb-sqlite.so  --database-args "<full path to DB file>"

       eurephiadm - This is configured in the ~/.eurephia/eurephiadm.cfg file

	      database_driver = edb-sqlite.so
	      database_params = <full path to DB file>

SEE ALSO

       eurephia-auth(7), eurephiadm(7), eurephia_init(7)

AUTHOR

       Copyright (C) 2008-2010	David Sommerseth <dazo@users.sourceforge.net>

David Sommerseth						     July 2010							     edb-sqlite(7)

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

2-Ch RAID Problem in SCO Open Server

Discussion started by: pko60

2. Filesystems, Disks and Memory

Adding RAID to server

Discussion started by: user23

3. Red Hat

linux server with raid controller card

Discussion started by: amir07

4. UNIX for Dummies Questions & Answers

efficient raid file server

Discussion started by: pcmacd