Root emailed me this message and thats ok it is supposed to. The thing that concerns me is that the ADMIN password came in plain text. I Xed it out for the purpose of this message of course.
Is there a way for me to set this so the password comes encrypted? OR is not included at all in the... (4 Replies)
Greetings.
I am struggling with a shell script to make my life simpler, with a number of practical ways in which it could be used. I want to take a standard text file, and pull the 'n'th word from each line such as the first word from a text file.
I'm struggling to see how each line can be... (5 Replies)
I'm attempting to print to a networked konica printer. No linux drivers that I know of exist, but we've always used HP 5si drivers and have had good results.
We just loaded a box up with CentOS 5, and now when we print any sort of file from the command line (lp -dkonica <filename>), the text is... (0 Replies)
Hi All,
I would like help with a script which can get rid of the first work of all lines in text file.
File 1
The name is Scott.
Output : name is Scott
---------- Post updated at 02:38 PM ---------- Previous update was at 02:37 PM ----------
Hi ALL
There is typo error in... (3 Replies)
Hi,
sorry for bothering with this easy problem but I can't understand...
I've a file like this:
"4","0x23a3"
"5","0x4234"
"11",""
"20",""
"11132","0x6456"
I would like to create a file like this:
4,23a3
5,4234
11,999999
20,999999
11132,6456
I've tried:
cat INPUT.txt | sed -e... (7 Replies)
Can any one help us in finding the the last word of each line from a text file and print it.
eg:
1st --> aaa bbbb cccc dddd eeee ffff ee
2nd --> aab ered er fdf ere ww ww f
the o/p should be a below.
ee
f (1 Reply)
FOLKS ,
i have a text file that is generated automatically of an another korn shell script, i want to bring in the fifth line of the text file in to my korn shell script and look for a particular word in the line . Can you all share some thoughts on this one.
thanks...
Venu (3 Replies)
How can i make a script to add text before the first word on a line in a textfile :
Example:
Old line:
is my place
New line:
this is my place
Please use and tags when posting code, data or logs etc. to preserve formatting and enhance readability, thanks. (3 Replies)
Hi everyone,
I want to know, if there is a way to modify one line in a text file with unix script, with out re-writing all the file.
For example, i have this file:
CONFIGURATION_1=XXXX
CONFIGURATION_2=YYYY
CONFIGURATION_3=ZZZZ
supose i have a command or function "modify" that... (7 Replies)
I´m trying to input a plain text table and I want to output a csv file with semicolon field separator.
I have some problems with the \r and the fields with more of one line.. Some gnu util to do this without problems or awk solution?
I´m attaching the original plain table file and the needed... (2 Replies)
Discussion started by: faka
2 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)