Hi,
I have a machine that sits on 10.2 network.
I need to ssh from this to another box that is on both 10.125 & 10.140 VLANs
what should I need to do?
Thanks! (3 Replies)
I want to make static route how would I proceed?
I'm using "route add DestinationIP gatewayIP hop to 1
I would like to make this permanent, so when it reboots I don't want to loose it, would I do this in netconf file? If so where?
I did a search got this site, it didn't help much. ... (2 Replies)
I have a machine with an interface that has two different addresses on CentOS 5
eth0: 10.20.21.77
eth0:1 141.218.1.221
If I issue this command I get the result I'm looking for.
/sbin/route add -net 141.218.1.0 netmask 255.255.255.0 gw 10.20.21.77
ip route show dev eth0
141.218.1.0/24... (1 Reply)
#netstat -nr (shows the following with more static routes)
192.168.18.202 10.129.155.1 UGH 0 29 en0 - -
and i just want to remove the above one
i tried
#smitty rmroute
destination type= net
dest add = 192.168.18.202
default gateway= 10.129.155.1
net... (1 Reply)
Hi guys,
sorry for asking noob question.
When do we really need to add a static route on the server?
I encounter this situation whereby a client trigger a network packet to the destination but the destination does not know how to return the traffic back to the client (source).
The issue was... (4 Replies)
Anyone know how to edit a static route in AIX? I find myself deleting and then recreating the route with the new information. Would be nice to know how to edit the route. (3 Replies)
Hello Guys..
I am facing this weird problem of static route not added after reboot!!
Following is my route-<interface> file..
# cat /etc/sysconfig/network-scripts/route-eth0
ADDRESS0=172.31.0.1
NETMASK0=255.255.255.255
GATEWAY0=192.168.208.1
ADDRESS1=172.31.15.2... (3 Replies)
Hi all,
This may be the basic question of Routing but I am a sort of new to networking so I am asking.
Do I need to put route for my router's LAN port ip to WAN (serial) port ip Or the router itself can communicate between its ports without routes.
lan (172.26.40.5) ... (3 Replies)
Hi,
I am on Linux Redhat 5.3. I added this static route but now I can't seem to take it out. Can you help?
netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
167.76.151.28 192.1.25.249 255.255.255.255 UGH 0 0... (1 Reply)
Discussion started by: samnyc
1 Replies
LEARN ABOUT HPUX
cdsd
cdsd(1m)cdsd(1m)NAME
cdsd - Starts the CDS server
SYNOPSIS
cdsd [-a] [-D] [-l principal] [-w route]
ARGUMENTS
Creates a new namespace if there is not an existing namespace. This flag is meaningful only when the cell is first configured (that is, the
initial creation of the namespace). For debugging use only. Causes the cdsd process not to fork. Locksmith mode. Allows the principal
specified to have full access to all information stored with this server. Routes serviceability messages.
DESCRIPTION
The cdsd command starts the CDS server.
Privilege Required
You must log in as superuser (root).
NOTES
This command is ordinarily executed by a DCE configuration or startup script. You should use this command interactively only when a cdsd
fails to start automatically after a reboot, or if you want to restart a cdsd after disabling it to perform a backup or to do diagnostic
work on the host system.
EXAMPLE
To restart a cdsd server, follow these steps: Log in to the server system as superuser (root). Verify that the dced and cdsadv processes
are running. Enter the following command to restart the CDS server: # cdsd
When the server process starts, it starts all clearinghouses on the system.
RELATED INFORMATION
Books: OSF DCE Administration Guide
cdsd(1m)