I have just installed 5.0.7 of openserver and forgot to create a /u filesystem.
I have a root filesystem that takes up most of the hard disc space and I want to reduce the size of that and create a /u.
I have tried divvy amd mkdev fs but to no avail.
Could somebody give me some idea as to how I... (2 Replies)
Hi,
I wish to store $string1 in $string1array a character in each array element.
Then i wish to echo the entire array to the screen so that it reads as the normal string again.
I have been trying with the code below but does not work. Please help...
To put string into array:
... (5 Replies)
A file contains the following information shown below. Every ceName has 2 consecutive lines that have to be evaluated, using awk, sed, cut (any common unix tools).
Input file:
ceName: Node-1
processName: tzMgmt
Status: PROCESS_NOT_RUNNING
ceName: Node-2
processName: tzMgmt
Status:... (15 Replies)
I have a HP proliant ML 570 G3 with two 146GB disk drives mirrored(RAID1+0)
windows server 2003 was installed on that disk.
I will add a disk.(scsi 300GB)
I will install Linux on that additional disk.
I want to create multiple-boot system.
Is it possible?
I wanna know how to create... (0 Replies)
Hi there,
Don't know if my title is relevant but I'm dealing with dangerous materials that I don't really know and I'm very afraid to mess anything up.
I have a Debian 5.0.4 server with 4 x 1TB hard drives.
I have the following mdstat
Personalities :
md1 : active raid1 sda1 sdd1... (3 Replies)
Hi guys and gals...
MacBook Pro.
OSX 10.13.2, default bash terminal.
I have a flat file 1920 bytes in size of whitespaces only. I need to put every single whitespace character into a bash array cell.
Below are two methods that work, but both are seriously ugly.
The first one requires that I... (7 Replies)
Hello,
On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active.
We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED.
... (1 Reply)
Hello,
On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active.
We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED.
... (3 Replies)
Discussion started by: terrya
3 Replies
LEARN ABOUT CENTOS
vfstab
vfstab(4) File Formats vfstab(4)NAME
vfstab - table of file system defaults
DESCRIPTION
The file /etc/vfstab describes defaults for each file system. The information is stored in a table with the following column headings:
device device mount FS fsck mount mount
to mount to fsck point type pass at boot options
The fields in the table are space-separated and show the resource name (device to mount), the raw device to fsck (device to fsck), the
default mount directory (mount point), the name of the file system type (FS type), the number used by fsck to decide whether to check the
file system automatically (fsck pass), whether the file system should be mounted automatically by mountall (mount at boot), and the file
system mount options (mount options). (See respective mount file system man page below in SEE ALSO for mount options.) A '-' is used to
indicate no entry in a field. This may be used when a field does not apply to the resource being mounted.
The getvfsent(3C) family of routines is used to read and write to /etc/vfstab.
/etc/vfstab can be used to specify swap areas. An entry so specified, (which can be a file or a device), will automatically be added as a
swap area by the /sbin/swapadd script when the system boots. To specify a swap area, the device-to-mount field contains the name of the
swap file or device, the FS-type is "swap", mount-at-boot is "no" and all other fields have no entry.
EXAMPLES
The following are vfstab entries for various file system types supported in the Solaris operating environment.
Example 1: NFS and UFS Mounts
The following entry invokes NFS to automatically mount the directory /usr/local of the server example1 on the client's /usr/local directory
with read-only permission:
example1:/usr/local - /usr/local nfs - yes ro
The following example assumes a small departmental mail setup, in which clients mount /var/mail from a server mailsvr. The following entry
would be listed in each client's vfstab:
mailsvr:/var/mail - /var/mail nfs - yes intr,bg
The following is an example for a UFS file system in which logging is enabled:
/dev/dsk/c2t10d0s0 /dev/rdsk/c2t10d0s0 /export/local ufs 3 yes logging
See mount_nfs(1M) for a description of NFS mount options and mount_ufs(1M) for a description of UFS options.
Example 2: pcfs Mounts
The following example mounts a pcfs file system on a fixed hard disk on an x86 machine:
/dev/dsk/c1t2d0p0:c - /win98 pcfs - yes -
The example below mounts a Jaz drive on a SPARC machine. Normally, the volume management daemon (see vold(1M)) handles mounting of remov-
able media, obviating a vfstab entry. If you choose to specify a device that supports removable media in vfstab, be sure to set the mount-
at-boot field to no, as below. Such an entry presumes you are not running vold.
/dev/dsk/c1t2d0s2:c - /jaz pcfs - no -
For removable media on a SPARC machine, the convention for the slice portion of the disk identifier is to specify s2, which stands for the
entire medium.
For pcfs file systems on x86 machines, note that the disk identifier uses a p (p0) and a logical drive (c, in the /win98 example above) for
a pcfs logical drive. See mount_pcfs(1M) for syntax for pcfs logical drives and for pcfs-specific mount options.
Example 3: CacheFS Mount
Below is an example for a CacheFS file system. Because of the length of this entry and the fact that vfstab entries cannot be continued to
a second line, the vfstab fields are presented here in a vertical format. In re-creating such an entry in your own vfstab, you would enter
values as you would for any vfstab entry, on a single line.
device to mount: svr1:/export/abc
device to fsck: /usr/abc
mount point: /opt/cache
FS type: cachefs
fsck pass: 7
mount at boot: yes
mount options:
local-access,bg,nosuid,demandconst,backfstype=nfs,cachedir=/opt/cache
See mount_cachefs(1M) for CacheFS-specific mount options.
Example 4: Loopback File System Mount
The following is an example of mounting a loopback (lofs) file system:
/export/test - /opt/test lofs - yes -
See lofs(7FS) for an overview of the loopback file system.
SEE ALSO fsck(1M), mount(1M), mount_cachefs(1M), mount_hsfs(1M), mount_nfs(1M), mount_tmpfs(1M), mount_ufs(1M), swap(1M), getvfsent(3C)
System Administration Guide: Basic Administration
SunOS 5.10 21 Jun 2001 vfstab(4)