12-09-2010
tcpdump may be more up your alley. nettop does nearly exactly what you want but has interactive output, not scriptable output...
9 More Discussions You Might Find Interesting
1. IP Networking
Firstly, I have no knowledge of hubs, so please keep any advice simple!
I have a UNIX hub, connecting three PCs and would like to know if the hub has NAT translation for incoming packets and if th hub is able to NAT translate packets coming in to a local (internal) LAN address.. (3 Replies)
Discussion started by: MartinD
3 Replies
2. IP Networking
Hi guys,
I'm using a Linux system(Ubuntu) and I've been trying to find a method to read the total packets received/sent on a specific port (e.g port 80 or port 25) on a local machine. I can read the overall total packets received/sent from the /proc/net/dev file system. But what I can't do is... (2 Replies)
Discussion started by: lildee
2 Replies
3. UNIX for Advanced & Expert Users
I would like to copy data flow (not redirect!!!) from 1567 port
to another 1194 port on same computer. The 1567 Port already binded by Scream program (it is bisy). Is it possible to do it by iptables or for it nesessary another programs? Can you help me in the decision of this question? (1 Reply)
Discussion started by: yanat
1 Replies
4. Solaris
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies
5. IP Networking
Hi,
I am trying to set up a dev environment and I have Ubuntu server (10.16.1.92) and a CentOS VM (10.16.3.235) on this. On the CentOS I have a program running on port 5433. Now my problem is that I am unable to telnet this port from another Windows server whereas I can telnet port 22 from... (5 Replies)
Discussion started by: rishav
5 Replies
6. IP Networking
i want to kill a tcp connection by killing its pid
with netstat -an i got the tcp ip connection on port 5914
but when i type ps -a or ps-e there is not such process running on port 5914
is it possible that because i do not log on with proper user account i can not see that process running? (30 Replies)
Discussion started by: alinamadchian
30 Replies
7. Solaris
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
8. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
9. UNIX for Beginners Questions & Answers
hi,
i would like to create a bash script that check which port in my Linux server are closed (not in use) from a specific range, port range (3000-3010).
the print output need to be only 1 port, and it will be nice if the output will be saved as a variable or in same file.
my code is:
... (2 Replies)
Discussion started by: yossi
2 Replies
LEARN ABOUT DEBIAN
if_enc
ENC(4) BSD Kernel Interfaces Manual ENC(4)
NAME
enc -- Encapsulating Interface
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device enc
DESCRIPTION
The enc interface is a software loopback mechanism that allows hosts or firewalls to filter ipsec(4) traffic using any firewall package that
hooks in via the pfil(9) framework.
The enc interface allows an administrator to see incoming and outgoing packets before and after they will be or have been processed by
ipsec(4) via tcpdump(1).
The ``enc0'' interface inherits all IPsec traffic. Thus all IPsec traffic can be filtered based on ``enc0'', and all IPsec traffic could be
seen by invoking tcpdump(1) on the ``enc0'' interface.
What can be seen with tcpdump(1) and what will be passed on to the firewalls via the pfil(9) framework can be independently controlled using
the following sysctl(8) variables:
Name Defaults Suggested
net.enc.out.ipsec_bpf_mask 0x00000003 0x00000001
net.enc.out.ipsec_filter_mask 0x00000001 0x00000001
net.enc.in.ipsec_bpf_mask 0x00000001 0x00000002
net.enc.in.ipsec_filter_mask 0x00000001 0x00000002
For the incoming path a value of 0x1 means ``before stripping off the outer header'' and 0x2 means ``after stripping off the outer header''.
For the outgoing path 0x1 means ``with only the inner header'' and 0x2 means ``with outer and inner headers''.
incoming path |------|
---- IPsec processing ---- (before) ---- (after) ----> | |
| Host |
<--- IPsec processing ---- (after) ----- (before) ---- | |
outgoing path |------|
Most people will want to run with the suggested defaults for ipsec_filter_mask and rely on the security policy database for the outer head-
ers.
EXAMPLES
To see the packets the processed via ipsec(4), adjust the sysctl(8) variables according to your need and run:
tcpdump -i enc0
SEE ALSO
tcpdump(1), bpf(4), ipf(4), ipfw(4), ipsec(4), pf(4), tcpdump(8)
BSD
November 28, 2007 BSD