You can test the firewall and PC X assuming :0.0 by going to the UNIX host and trying:
Now, if it cannot connect, you can go to the PC and try the same thing. If it works, it is firewall somewhere, and if not, the PC X service is not working. Also, try an Xterm or other X app on the PC to make sure X does more than connect there.
I have the following shell script to map a drive to a windows machine:
echo Enter password:
stty -echo
read passwd
stty echo
mount -t smbfs -ousername=myusername,password=$passwd //192.168.2.5/sharename /mnt/mountname
It works fine and the share mounts, but for some reason I get this... (4 Replies)
Hi everyone
first of all you should know that I've been working with solaris for a few days only. :)
I need to install some programs and I have had the following troubles:
1. When I used /.configure it showed the following message:
"no acceptable C compiler found in $PATH"
I included... (2 Replies)
Dear brothers.
i tried so many times to install openssl-0.9.8g in x86 machine. i have done ./config without any error notification. when i execute the make command i am having the same error
fatal error: Command failed for target `build_crypto'.
i installed c compiler the verson of... (1 Reply)
Hi ppl, anyone has encounter this error before? I can't remote login to another machine residing in the same subnet via CDE and the error I get in var/dt/Xerrors is
XDMCP fatal error: Session declined No valid address
Warning:
Name: submenu_options_button
Class: XmRowColumn
... (2 Replies)
Hi,
on a Linux RED HAT I issue the following to mount a shared filesystem on a Win server 2003 and it fails :
# smbmount //172.16.0.42/eb_depot /mnt/eb_depot -o username=domaine/Administrateur rw
Password:
30494: session setup failed: ERRDOS - ERRnoaccess (Access denied.)
SMB connection... (0 Replies)
Hi,
we have re installes our Windows domain and Activedirectory, and from then until now we can not mount shared windows filesystems on Linux server and we receive :
mount -t smbfs -o username=user1,password=xxxxx //xxx.16.0.xxx/dir
/mnt/dir
3550: session setup failed: ERRDOS - ERRnoaccess... (0 Replies)
Hi Friends
I have a compiler(Sun Forte,I believe) running in my Solaris 9 box.
since y'day my development team is finding this error when they compile:
ld.so.1: expr: fatal: libgmp.so.3: open failed: No such file or directory
I ran a search for this file and found it in one of my file... (2 Replies)
I am trying to install Expect 5.43 on my Solaris 10 x86 PC. When I run the make file I get - Command failed for target 'exp_inter.o'. I tried to find the file (find / -name exp_inter.o -print 2>/dev/null) but could not. Where can I get this file from? (2 Replies)
Hello all, I just post here to expose an issue I have encountered two days ago and finally successfully solve just right now using info on this site( but not only).
Config : Two SUN/ORACLE sparc Solaris 10 system.
Purpose : do a remote CDE login from host one to the host two.
method: from... (0 Replies)
Today, I noticed some errors in our SSL cert renewal log files, mostly related to domains where the IP address had changed. Concerned about this, rebuilt out SSL cert, which normally goes well without a hiccup.
However, for today, for some reason which I cannot explain, there was a PHP error... (0 Replies)
Discussion started by: Neo
0 Replies
LEARN ABOUT SUSE
net::config
Net::Config(3pm) Perl Programmers Reference Guide Net::Config(3pm)NAME
Net::Config - Local configuration data for libnet
SYNOPSYS
use Net::Config qw(%NetConfig);
DESCRIPTION
"Net::Config" holds configuration data for the modules in the libnet distribution. During installation you will be asked for these values.
The configuration data is held globally in a file in the perl installation tree, but a user may override any of these values by providing
their own. This can be done by having a ".libnetrc" file in their home directory. This file should return a reference to a HASH containing
the keys described below. For example
# .libnetrc
{
nntp_hosts => [ "my_preferred_host" ],
ph_hosts => [ "my_ph_server" ],
}
__END__
METHODS
"Net::Config" defines the following methods. They are methods as they are invoked as class methods. This is because "Net::Config" inherits
from "Net::LocalCfg" so you can override these methods if you want.
requires_firewall HOST
Attempts to determine if a given host is outside your firewall. Possible return values are.
-1 Cannot lookup hostname
0 Host is inside firewall (or there is no ftp_firewall entry)
1 Host is outside the firewall
This is done by using hostname lookup and the "local_netmask" entry in the configuration data.
NetConfig VALUES
nntp_hosts
snpp_hosts
pop3_hosts
smtp_hosts
ph_hosts
daytime_hosts
time_hosts
Each is a reference to an array of hostnames (in order of preference), which should be used for the given protocol
inet_domain
Your internet domain name
ftp_firewall
If you have an FTP proxy firewall (NOT an HTTP or SOCKS firewall) then this value should be set to the firewall hostname. If your
firewall does not listen to port 21, then this value should be set to "hostname:port" (eg "hostname:99")
ftp_firewall_type
There are many different ftp firewall products available. But unfortunately there is no standard for how to traverse a firewall. The
list below shows the sequence of commands that Net::FTP will use
user Username for remote host
pass Password for remote host
fwuser Username for firewall
fwpass Password for firewall
remote.host The hostname of the remote ftp server
0 There is no firewall
1
USER user@remote.host
PASS pass
2
USER fwuser
PASS fwpass
USER user@remote.host
PASS pass
3
USER fwuser
PASS fwpass
SITE remote.site
USER user
PASS pass
4
USER fwuser
PASS fwpass
OPEN remote.site
USER user
PASS pass
5
USER user@fwuser@remote.site
PASS pass@fwpass
6
USER fwuser@remote.site
PASS fwpass
USER user
PASS pass
7
USER user@remote.host
PASS pass
AUTH fwuser
RESP fwpass
ftp_ext_passive
ftp_int_passive
FTP servers can work in passive or active mode. Active mode is when you want to transfer data you have to tell the server the address
and port to connect to. Passive mode is when the server provide the address and port and you establish the connection.
With some firewalls active mode does not work as the server cannot connect to your machine (because you are behind a firewall) and the
firewall does not re-write the command. In this case you should set "ftp_ext_passive" to a true value.
Some servers are configured to only work in passive mode. If you have one of these you can force "Net::FTP" to always transfer in
passive mode; when not going via a firewall, by setting "ftp_int_passive" to a true value.
local_netmask
A reference to a list of netmask strings in the form "134.99.4.0/24". These are used by the "requires_firewall" function to determine
if a given host is inside or outside your firewall.
The following entries are used during installation & testing on the libnet package
test_hosts
If true then "make test" may attempt to connect to hosts given in the configuration.
test_exists
If true then "Configure" will check each hostname given that it exists
perl v5.12.1 2010-07-01 Net::Config(3pm)