BLKID(8)						       System Administration							  BLKID(8)

NAME

       blkid - locate/print block device attributes

SYNOPSIS

       blkid -L label | -U uuid

       blkid [-dghlv] [-c file] [-o format] [-s tag]
	     [-t NAME=value] [device ...]

       blkid -p [-O offset] [-o format] [-S size] [-s tag]
		[-n list] [-u list] device ...

       blkid -i [-o format] [-s tag] device ...

DESCRIPTION

       The  blkid  program  is	the  command-line  interface  to working with the libblkid(3) library.	It can determine the type of content (e.g.
       filesystem or swap) that a block device holds, and also the attributes (tokens, NAME=value pairs) from the content metadata (e.g. LABEL	or
       UUID fields).

       When  device  is specified, tokens from only this device are displayed.	It is possible to specify multiple device arguments on the command
       line.  If none is given, all devices which appear in /proc/partitions are shown, if they are recognized.

       Note that blkid reads information directly from devices and for non-root users it returns cached unverified information.  It is	better	to
       use  lsblk  --fs  to  get  a  user-friendly overview of filesystems and devices.  lsblk(8) is also easy to use in scripts.  blkid is mostly
       designed for system services and to test libblkid functionality.

       blkid has two main forms of operation: either searching for a device with a specific NAME=value pair, or displaying  NAME=value	pairs  for
       one or more specified devices.

OPTIONS

       The  size  and  offset arguments may be followed by the multiplicative suffixes like KiB (=1024), MiB (=1024*1024), and so on for GiB, TiB,
       PiB, EiB, ZiB and YiB (the "iB" is optional, e.g. "K" has the same meaning as "KiB"), or the suffixes KB (=1000), MB (=1000*1000),  and	so
       on for GB, TB, PB, EB, ZB and YB.

       -c cachefile
	      Read  from  cachefile  instead of reading from the default cache file (see the CONFIGURATION FILE section for more details).  If you
	      want to start with a clean cache (i.e. don't report devices previously scanned but not necessarily available at this time),  specify
	      /dev/null.

       -d     Don't  encode  non-printing  characters.	The non-printing characters are encoded by ^ and M- notation by default.  Note that the -o
	      udev output format uses a different encoding which cannot be disabled.

       -g     Perform a garbage collection pass on the blkid cache to remove devices which no longer exist.

       -h     Display a usage message and exit.

       -i     Display information about I/O Limits (aka I/O topology).	The 'export' output format is automatically enabled.  This option  can	be
	      used together with the -p option.

       -k     List all known filesystems and RAIDs and exit.

       -l     Look  up	only  one device that matches the search parameter specified with the -t option.  If there are multiple devices that match
	      the specified search parameter, then the device with the highest priority is returned, and/or the first device found at a given pri-
	      ority.   Device types in order of decreasing priority are: Device Mapper, EVMS, LVM, MD, and finally regular block devices.  If this
	      option is not specified, blkid will print all of the devices that match the search parameter.

       -L label
	      Look up the device that uses this filesystem label; this is equal to -l -o device -t LABEL=label.  This lookup  method  is  able	to
	      reliably use /dev/disk/by-label udev symlinks (dependent on a setting in /etc/blkid.conf).  Avoid using the symlinks directly; it is
	      not reliable to use the symlinks without verification.  The -L option works on systems with and without udev.

	      Unfortunately, the original blkid(8) from e2fsprogs uses the -L option as a synonym for -o list.	For better portability, use -l	-o
	      device -t LABEL=label and -o list in your scripts rather than the -L option.

       -n list
	      Restrict	the probing functions to the specified (comma-separated) list of superblock types (names).  The list items may be prefixed
	      with "no" to specify the types which should be ignored.  For example:

		blkid -p -n vfat,ext3,ext4 /dev/sda1

	      probes for vfat, ext3 and ext4 filesystems, and

		blkid -p -n nominix /dev/sda1

	      probes for all supported formats except minix filesystems.  This option is only useful together with -p.

       -o format
	      Use the specified output format.	Note that the order of variables and devices is not fixed.  See also option -s.  The format param-
	      eter may be:

	      full   print all tags (the default)

	      value  print the value of the tags

	      list   print the devices in a user-friendly format; this output format is unsupported for low-level probing (-p or -i).

		     This output format is DEPRECATED in favour of the lsblk(8) command.

	      device print the device name only; this output format is always enabled for the -L and -U options

	      udev   print key="value" pairs for easy import into the udev environment; the keys are prefixed by ID_FS_ or ID_PART_ prefixes

		     The  udev	output	returns  the  ID_FS_AMBIVALENT	tag  if more superblocks are detected, and ID_PART_ENTRY_* tags are always
		     returned for all partitions including empty partitions.  This output format is DEPRECATED.

	      export print key=value pairs for easy import into the environment; this output format is automatically enabled when I/O  Limits  (-i
		     option) are requested

       -O offset
	      Probe at the given offset (only useful with -p).	This option can be used together with the -i option.

       -p     Switch to low-level superblock probing mode (bypassing the cache).

	      Note that low-level probing also returns information about partition table type (PTTYPE tag) and partitions (PART_ENTRY_* tags).

       -s tag For each (specified) device, show only the tags that match tag.  It is possible to specify multiple -s options.  If no tag is speci-
	      fied, then all tokens are shown for all (specified) devices.  In order to just refresh the cache without showing any tokens, use	-s
	      none with no other options.

       -S size
	      Override the size of device/file (only useful with -p).

       -t NAME=value
	      Search  for  block devices with tokens named NAME that have the value value, and display any devices which are found.  Common values
	      for NAME include TYPE, LABEL, and UUID.  If there are no devices specified on the command line, all block devices will be  searched;
	      otherwise only the specified devices are searched.

       -u list
	      Restrict	the  probing  functions  to the specified (comma-separated) list of "usage" types.  Supported usage types are: filesystem,
	      raid, crypto and other.  The list items may be prefixed with "no" to specify the usage types which should be ignored.  For example:

		blkid -p -u filesystem,other /dev/sda1

	      probes for all filesystem and other (e.g. swap) formats, and

		blkid -p -u noraid /dev/sda1

	      probes for all supported formats except RAIDs.  This option is only useful together with -p.

       -U uuid
	      Look up the device that uses this filesystem uuid.  For more details see the -L option.

       -V     Display version number and exit.

RETURN CODE

       If the specified token was found, or if any tags were shown from (specified) devices, 0 is returned.

       If the specified token was not found, or no (specified) devices could be identified, an exit code of 2 is returned.

       For usage or other errors, an exit code of 4 is returned.

       If an ambivalent low-level probing result was detected, an exit code of 8 is returned.

CONFIGURATION FILE

       The standard location of the /etc/blkid.conf config file can be overridden by the environment variable BLKID_CONF.  The	following  options
       control the libblkid library:

       SEND_UEVENT=<yes|not>
	      Sends  uevent  when  /dev/disk/by-{label,uuid,partuuid,partlabel}/ symlink does not match with LABEL, UUID, PARTUUID or PARTLABEL on
	      the device.  Default is "yes".

       CACHE_FILE=<path>
	      Overrides the standard location of the cache file.  This setting can be overridden by the environment variable BLKID_FILE.   Default
	      is /run/blkid/blkid.tab, or /etc/blkid.tab on systems without a /run directory.

       EVALUATE=<methods>
	      Defines LABEL and UUID evaluation method(s).  Currently, the libblkid library supports the "udev" and "scan" methods.  More than one
	      method may be specified in a comma-separated list.  Default is "udev,scan".  The "udev" method uses udev /dev/disk/by-* symlinks and
	      the "scan" method scans all block devices from the /proc/partitions file.

AUTHOR

       blkid was written by Andreas Dilger for libblkid and improved by Theodore Ts'o and Karel Zak.

ENVIRONMENT

       Setting LIBBLKID_DEBUG=0xffff enables debug output.

SEE ALSO

       libblkid(3), findfs(8), wipefs(8)

AVAILABILITY

       The blkid command is part of the util-linux package and is available from ftp://ftp.kernel.org/pub/linux/utils/util-linux/.

util-linux							    March 2013								  BLKID(8)