Hi Peeps,
Trying to run analyze and verify on a disk, it won't as it's telling me the disk is write protected. Anyone got any ideas on how to remove the write protection????
Didn't even know you could write protect hard disks.
Thanks for any advice
Marty (2 Replies)
Hi all
We have got issues with copying a 2.6 GB file from one folder to another folder.
Well, this is not the first issue we are having on the box currently, i will try to explain everything we have done from the past 2 days.
We got a message 2 days back saying that our Production is 98%... (3 Replies)
hi
I've a fresh installation of SCO 5.0.7 on the IDE hard disk.
For SCSI hard disk I can declare, for example blc disk driver using:
# mkdev hd 0 SCSI-0 0 blc 0but it works for IDE hard disk? (3 Replies)
Hi all,
I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it... (23 Replies)
Please, I need help tuning my script. It works but it's too slow.
The code reads an acivity log file with 50.000 - 100.000 lines and filters error messages from it. The data in the actlog file look similar to this:
02/08/2011 00:25:01,ANR2034E QUERY MOUNT: No match found using this criteria.... (5 Replies)
There is a big problem with the server (VPS based on OpenVZ, CentOS 5, 3GB RAM). The problem is the following. The first 15-20 minutes after starting the server is operating normally, the load average is less than or about 1.0, but then begins to increase sharply% wa, then hovers around 95-99%.... (2 Replies)
I have identical M5000 machines that are needing to transfer very large amounts of data between them. These are fully loaded machines, and I've already checked IO, memory usage, etc... I get poor network performance even when the machines are idle or copying via loopback. The 10 GB NICs are... (7 Replies)
hi guys
right now I have 6 Virtual Machines (VMs) running on Vmware ESXi 5.1 and attached to Storage SAN.
All these run Suse Linux 11 SP1 x64.
All of a sudden 1 of these VMs is running very slow making high CPU usage and I see al wait % kinda high 40-50%. Apparently since I don't own this... (5 Replies)
Discussion started by: karlochacon
5 Replies
LEARN ABOUT LINUX
metaclear
metaclear(1M) System Administration Commands metaclear(1M)NAME
metaclear - delete active metadevices and hot spare pools
SYNOPSIS
/usr/sbin/metaclear -h
/usr/sbin/metaclear [-s setname] -a [-f]
/usr/sbin/metaclear component
/usr/sbin/metaclear [-s setname] [-f] metadevice... hot_spare_pool...
/usr/sbin/metaclear [-s setname] -r [-f] metadevice... hot_spare_pool...
/usr/sbin/metaclear [-s setname] -p component
/usr/sbin/metaclear [-s setname] -p metadevice
DESCRIPTION
The metaclear command deletes the specified metadevice or hot_spare_pool., or purges all soft partitions from the designated component.
Once a metadevice or hot spare pool is deleted, it must be re-created using metainit before it can be used again.
Any metadevice currently in use (open) cannot be deleted.
OPTIONS
Root privileges are required for all of the following options except -h.
-a Deletes all metadevices and configured hot spare pools in the set named by -s, or the local set by default.
-f Deletes (forcibly) a metadevice that contains a subcomponent in an error state.
-h Displays usage message.
-p Deletes (purges) all soft partitions from the specified metadevice or component.
-r Recursively deletes specified metadevices and hot spare pools, but does not delete metadevices on which others
depend.
-s setname Specifies the name of the diskset on which metaclear will work. Using the -s option causes the command to perform
its administrative function within the specified diskset. Without this option, the command performs its function on
local metadevices and/or hot spare pools.
OPERANDS
metadevice ... Specifies the name(s) of the metadevice(s) to be deleted.
component Specifies the c*d*t*s* name(s) of the components containing soft partitions to be deleted.
hot_spare_pool ... Specifies the name(s) of the hot spare pools to be deleted in the form hspnnn, where nnn is a number in the range
000-999.
EXAMPLES
Example 1: Deleting Various Devices
The following example deletes a metadevice named d10.
# metaclear /dev/md/dsk/d10
The following example deletes all local metadevices and hot spare pools on the system.
# metaclear -a
The following example deletes a mirror, d20, with an submirror in an error state.
# metaclear -f d20
The following example deletes a hot spare pool, hsp001.
# metaclear hsp001
The following example deletes a soft partition, d23.
# metaclear d23
The following example purges all soft partitions on the slice c2t3d5s2 if those partitions are not being used by other metadevices or are
not open.
# metaclear -p c2t3d5s2
The following example purges soft partitions from a metadevice.
# metaclear -p d2
d3: Soft Partition is cleared
d4: Soft Partition is cleared
d5: Soft Partition is cleared
EXIT STATUS
The following exit values are returned:
0 Successful completion.
>0 An error occurred.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWmdu |
+-----------------------------+-----------------------------+
SEE ALSO mdmonitord(1M), metadb(1M), metadetach(1M), metahs(1M), metainit(1M), metaoffline(1M), metaonline(1M), metaparam(1M), metarecover(1M),
metarename(1M), metareplace(1M), metaroot(1M), metaset(1M), metassist(1M), metastat(1M), metasync(1M), metattach(1M), md.tab(4), md.cf(4),
mddb.cf(4), md.tab(4), attributes(5), md(7D)
Solaris Volume Manager Administration Guide
SunOS 5.10 8 Aug 2003 metaclear(1M)