Sponsored Content
Top Forums UNIX for Dummies Questions & Answers Booting a Sparcstation 5 with dead HD Post 302475993 by jrynd on Tuesday 30th of November 2010 01:26:47 PM
Old 11-30-2010
Error Booting a Sparcstation 5 with dead HD

We have an ancient Sparcstation 5 for those few clients that still run SunOS or Solaris. After the last power outage (4 years ago?) we never turned it back on. It had been making some unpleasant noises back then, too.

Now we need it again and it won't boot.

The machine came with one hard drive and SunOS. We bought an additional HD and put Solaris on it. The bottom drive is SunOS and the top one is for Solaris. We've deduced that the original ( SunOS, bottom) drive has failed -- when it is in the bottom bay we get a notice
Code:
The SCSI bus is hung. Perhaps an external device is turned off

upon powerup and the machine hangskeyboard does nothing). We also hear a sad whine, dropping in pitch, every few seconds (like maybe the HD is trying to spin up, fails, and then spins down). The whine is still there if we switch the drives around, but we don't get the "SCSI bus hung" notice.

We took out that hard drive and only left the Solaris drive in there (on the bottom). Now when we boot, before we can type anything we get
Code:
Boot device: /iommu/sbus/espdma/esp/sd@3,0:a  File and args: cprboot
root on /iommu@0,10000000/sbus@0,1001000/espdma@5,8400000/esp@5,8800000/sd@3,0: a fstype 4.2
Boot: cprboot
Boot:  lookuppn failed: No such file or directory (errno 2)
copen: bad vn_open
boot failed

This is strange to us since in the past we had to type boot disk2 or boot disk3 at the ok prompt.

We really only need to boot into Solaris. Is there some way of changing the drive so we can boot off it? Change the SCSI id?
 

10 More Discussions You Might Find Interesting

1. Solaris

Lost password on a SPARCstation Voyager

Hi, I got hold of a SUN SPARCstation Voyager today, but I don't have the root password. I made a linux bootdisk and tried to sue that to edit the shadow file, but it comes up saying "magic number" (since it's not a UFS floppy). I haven't got any recovery disks for it, and no documentation. ... (5 Replies)
Discussion started by: KWManiac
5 Replies

2. Solaris

SPARCstation 5 broadcasting

Hey guys...hopefully this will be a fairly easy one. I've got an old SPARCstation 5 running Sun 5.5.1 that I just hooked up to the network so that I can run HP OpenView. The box is working fine, but it is broadcasting as a boot server. In other words, when co-workers come in and get ready to log... (2 Replies)
Discussion started by: cdunavent
2 Replies

3. UNIX for Advanced & Expert Users

SPARCstation is broadcasting as boot server

Hey guys...hopefully this will be a fairly easy one. I've got an old SPARCstation 5 running Sun 5.5.1 that I just hooked up to the network so that I can run HP OpenView. The box is working fine, but it is broadcasting as a boot server. In other words, when co-workers come in and get ready to... (2 Replies)
Discussion started by: cdunavent
2 Replies

4. Solaris

SparcStation 20 Crashed. Doesn't boot.

I have sparc Station 20 which is crashed and doesn't boot from the OK prompt except gives me bunch of errors. How can i retrieve my data from the root drive before go for re-installation. This system has Veritas Volume manager on it don't know the version but assume its 2.xxx. Thanks -Adeel (0 Replies)
Discussion started by: deal732
0 Replies

5. Solaris

Configuring TP Ethernet in SPARCstation 5 Solaris 8

Hey. i have been trying to configure the on board Ethernet in My Sparcstation 5, i have spent a lot of time on the ifconfig man pages. but it could really be nice with some pro. help. i don't think the interface is running . i don't know what name the interface have, le0 eth0 et0, it just says no... (4 Replies)
Discussion started by: mads-nielsen
4 Replies

6. UNIX for Dummies Questions & Answers

Help! Sun SPARCstation 10

I picked up a handful of used SPARCstation10s & 20s and I would like to set it up. I connected a regular PC vga monitor using sun video adapter "1395-SUN". Everything seems to turn on fine...but I get this on the screen and there is absolutely nothing I can do to get out of it. Lost Carrier... (7 Replies)
Discussion started by: cc9911
7 Replies

7. Solaris

help about time and date on sparcstation

Hi all, I have one problem on my sparcstation20, time stops when I turn off my station, where is the problem? do u think is the NVRAM is crashed? ( for example, I turn off my station at 11:00, when I turn on the next day, I found time on 22:20)!!! please help me thank's for All (9 Replies)
Discussion started by: reda_lui
9 Replies

8. Solaris

SPARCSTATION 20 - No Video

I apologize in advance that this is probably more of a hardware question than a unix/software one. I've got a seemingly brand-new sparcstation 20 that came with 2 memory modules and that's about it. I've added a new 2 GB HDD and a VSIMM Onboard SX Graphics module. So, I assume with the... (2 Replies)
Discussion started by: ErikTheHAck
2 Replies

9. UNIX for Dummies Questions & Answers

remote use of a sparcstation

I am away from my Unix sparcstation and need to work on it remotely via a PC. I can open a PuTTy window and execute line commands. But I've forgotten how to be able to work on a graphical program, like xfig. I know there are some commands to enable this, but can't remember them. (6 Replies)
Discussion started by: leveson
6 Replies

10. Hardware

SparcStation 20 emulator

Hello, Just wanted to let interested people know that we've recently released a Linux freeware version of SparcStation 20 emulator. It emulates SS20 with some basic peripherals: a single SPARC V8 32bit CPU, up to 512MB RAM, an NCR53C94 SCSI controller, 2 serial lines, disks, a network adapter,... (7 Replies)
Discussion started by: Thlan
7 Replies
PLYMOUTH(8)						       System Administration						       PLYMOUTH(8)

NAME
plymouth - A graphical boot system and logger DESCRIPTION
plymouth is a graphical boot system for Linux which takes advantage of the kernel-based mode setting (KMS) available for modern graphic cards to provide a seamless, flickerfree and attractive boot screen. It allows to choose between various, static or animated graphical themes to spruce up the startup and avoid the noise generated by the vast amount of kernel messages while the machine boots into X. On systems where kernel-based mode setting is not available, plymouth falls back to a text mode boot screen which provides a simple progress bar to pro- vide feedback during boot. In order for the configured default plymouth theme to be loaded during boot, the option `splash' (or `rhgb' for backward compatibility with the RHGB boot splash) must be provided at the kernel command line. Without this command line option, plymouth will default to showing detailed boot output. During the boot process, the user can switch between the graphical theme and the detailed boot output using the Escape key. SEE ALSO
grub(8), plymouth-set-theme(1), plymouthd(8), plymouth(1), http://www.freedesktop.org/wiki/Software/Plymouth AUTHORS
plymouth was originally prototyped and named by Kristian Hogsberg, originally written by Ray Strode and has had significant contributions from Charlie Brej. It has also had contributions from Peter Jones, Adam Jackson, Frederic Crozat and others. plymouth PLYMOUTH(8)
All times are GMT -4. The time now is 06:38 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy