SNMP_AGENT_API(3)						     Net-SNMP							 SNMP_AGENT_API(3)

NAME

       snmp_agent_api - embedding an agent into a external application

SYNOPSIS

       #include <net-snmp/net-snmp-config.h>
       #include <net-snmp/net-snmp-includes.h>
       #include <net-snmp/agent/net-snmp-agent-includes.h>

       int
       main (int argc, char *argv[])
       {
	 int agentx_subagent = 1;  /* Change this if you're a master agent.  */

	 snmp_enable_stderrlog();

	 /*  If we're an AgentX subagent...  */
	 if (agentx_subagent) {
	     /* ...make us an AgentX client.  */
	     netsnmp_ds_set_boolean(NETSNMP_DS_APPLICATION_ID,
				    NETSNMP_DS_AGENT_ROLE, 1);
	 }

	 init_agent("yourappname");

	 /*  Initialize your MIB code here.  */
	 init_my_mib_code();

	 /*  `yourappname' will be used to read yourappname.conf files.  */
	 init_snmp("yourappname");

	 /*  If we're going to be a SNMP master agent...  */
	 if (!agentx_subagent)
	     init_master_agent();  /*  Listen on default port (161).  */

	 /*  Your main loop here...  */
	 while (whatever) {
	     /* if you use select(), see snmp_api(3) */
	     /*     --- OR ---	*/
	     agent_check_and_process(0); /* 0 == don't block */
	 }

	 /*  At shutdown time:	*/
	 snmp_shutdown("yourappname");
       }

       Then:
       $(CC) ... `net-snmp-config --agent-libs`

DESCRIPTION

       Our  goal  is  to  create  a  easy to use interface to the Net-SNMP package such that you can take code that you have written that has been
       designed to be a Net-SNMP MIB module and embed it into an external application where you can either chose to be a SNMP master agent  or	an
       AgentX sub-agent using the same MIB module code.  Our suggestion is that you use our (or another) SNMP agent as the AgentX master agent and
       chose to become an AgentX subagent which then attaches to the master.

       The Net-SNMP package provides a pair of libraries that enables easy embedding of an SNMP or AgentX agent into an external software package.
       AgentX is an extensible protocol designed to allow multiple SNMP sub-agents all run on one machine under a single SNMP master agent.  It is
       defined in RFC 2741.

       You will need to perform a few tasks in order to accomplish this. First off, you will need to initialize both the SNMP library and the SNMP
       agent library. As indicated above, this is done slightly differently depending on whether or not you are going to perform as a master agent
       or an AgentX sub-agent.

CONFIGURATION

       If you intend to operate as an AgentX sub-agent, you will have to configured the Net-SNMP package with agentx support (which is	turned	on
       by default, so just don't turn it off)

       Additionally, you will need to link against the net-snmp libraries (use the output of "net-snmp-config --agent-libs" to get a library list)
       and call subagent_pre_init() as indicated above.

COMPILING

       In order to make use of any of the above API, you will need to link against at least the four libraries listed above.

FUNCTIONS

       where to find out more information on them.  It is certainly not a complete list of what is available within all the net-snmp libraries.

       snmp_enable_stderrlog()
	      Logs error output from the SNMP agent to the standard error stream.

       netsnmp_ds_set_boolean()
	      Please see the default_store(3) manual page for more information about this API.

       init_agent(char *name)
	      Initializes the embedded agent.  This should be called before the init_snmp() call.  name is used to dictate what .conf file to read
	      when init_snmp() is called later.

       init_snmp(char *name)
	      Initializes  the SNMP library.  Note that one of the things this will do will be to read configuration files in an effort to config-
	      ure your application. It will attempt to read the configuration files named by the name string that you passed in.  It can  be  used
	      to  configure access control, for instance.   Please see the read_config(3), snmp_config(5), and snmpd.conf(5) manual pages for fur-
	      ther details on this subject.

       init_master_agent(void)
	      Initializes the master agent and causes it to listen for SNMP requests on its default UDP port of 161.

       agent_check_and_process(int block)
	      This checks for packets arriving on the SNMP port and processes them if some are found.  If block is  non-zero,  the  function  call
	      will  block  until  a packet arrives or an alarm must be run (see snmp_alarm(3)).  The return value from this function is a positive
	      integer if packets were processed, zero if an alarm occurred and -1 if an error occured.

       snmp_shutdown(char *name);
	      This shuts down the agent, saving any needed persistent storage, etc.

SEE ALSO

       http://www.net-snmp.org/tutorial-5/toolkit/,  select(2),  snmp_api(3),  default_store(3),  snmp_alarm(3),  read_config(3),  snmp_config(5),
       snmpd.conf(5)

4.2 Berkeley Distribution					    02 Apr 2001 						 SNMP_AGENT_API(3)