I'm not aware of the specifics of precisely what you're doing to copy a file to tape, but you could ssh or rsh from the machine with the file to the machine with the tape, to run the command there but pipe data in from the originating machine.
Pls. correct me for the required steps which we need to do to share the Tape drive or whatever drive from other machine in network .
1.related files : /etc/hosts ,/etc/hosts.equiv , ....?
2. we need to insert the user & machine name inside hosts.equiv . (machinname1 username1
... (1 Reply)
I don't know if this can be done, otherwise, my project will come to
a screeching halt.
I have a SCO 5.0.5 machine connected to the internet with a static
IP address.
I need to be able to share a drive : /shareddrive
I need to map to it from a windows machine:
hence, what i'd like to... (3 Replies)
Hi,
I need to restore my tape backup, when I type "tape status" it gives;
status : ready beginning-of-tape write-protected
soft errors : 0
hard errors : 0
underruns : 3
but... (4 Replies)
I'm building a new server that doesn't have an internal tape drive. It is running 5.3ML8. I have another server running 5.1ML9 that has an LTO1 drive I'd like to share.
Is this possible, or should I look into twin-tailing it, if that's even supported anymore. (0 Replies)
I have T5220 server with DVD drive. I have installed few logical domains in the server and wonder how they can share the DVD drive. I have not seen any mention of that in Sun documentation. (7 Replies)
I have to setup a local zone and need to share the fiber attached tape drive that is connected to the global zone.
What is the best way to do this? Will sharing the /dev/rmt directory via lofs work?
Any help is appreciated! (1 Reply)
HI
i have setuped a nfs between a AIX system and a linux os ,keeping AIX as sever
i need to share the CDrom in AIX server with the linux operating system. ie. linux os
machine does't have a cdrom . will i be able be share ..i tried a lot but it gives a message which resembles NFS access... (3 Replies)
I have used ioscan -fnC tape and the system identified the tape drive. what is the command to show a listing of what is on the tape? I have used ls /dev/rmt/rmt0 to no avail. can anyone help?
Thanks in advance (10 Replies)
Discussion started by: Randydog
10 Replies
LEARN ABOUT DEBIAN
dds-dd
dds-dd(1) General Commands Manual dds-dd(1)NAME
dds-dd - tool to read a dds device.
SYNOPSIS
dds-dd [ -f device ]
DESCRIPTION
dds-dd reads a dds tape devices (DAT). Every block is read and written to stdout. A tape with unknown block size or blocks of different
size can be read.
The default device is /dev/rmt0, which may be overridden with the environment variable TAPE, which in turn may be overridden with the
-f device option. The device must be a character special file.
OPTIONS -f device
Device of the tape archive (default is /dev/rmt0). Must be a character special file connected to a dds tape device.
-V,--version
Print the version number of mt-dds to stderr and exit immediately.
--help print some screens of online help with examples through a pager and exit immediately.
EXAMPLES
Example: Read the tape and make a listing:
dds-dd | tar ft -
Example: Read the tape and make a listing:
dds-dd | cpio -it
ENVIRONMENT
The environment variable TAPE overrides the default tape device /dev/rmt0.
SEE ALSO
dds2tar(1), dds2index(1), mt(1), tar(1)HISTORY
This program was created to use it in conjunction with dds2tar.
AUTHOR
J"org Weule (weule@cs.uni-duesseldorf.de), Phone +49 211 751409. This software is available at ftp.uni-duesseldorf.de:/pub/unix/apollo
2.4 dds-dd(1)