11-12-2010
errpt kept sending errors after disk replacement
Hi,
The system is a Power6 8204 with an external storage 7031. OS is AIX 5.3. I replaced a failed disk hdisk28 and put it back to the volume group. Everything looks just fine. After the replacement, errpt has kept sending "Perm DISK OPERATION ERROR".
Other than the error, everything still looks fine with the new disk and the system. I've closed all the serviceable cases and renewed Log Repair in diag, but still received the errors.
My question are (1) how to stop errpt from sending the error? (2) How to troubleshoot any possible disk issue? Please help.
Thank you in advance!
10 More Discussions You Might Find Interesting
1. SuSE
Errpt- Generates an error report from entries in the log.
Errpt is a AIX command.
we want equivallent suse linux command.
If there is no exact replace ment pls give us alternative way.
we want to log each n evry system error and generate an error report (2 Replies)
Discussion started by: vrguha
2 Replies
2. AIX
Hi All,
Can anyone explain me the meanning of the following errors:
LABEL: SC_DISK_ERR2
IDENTIFIER: B6267342
Description
DISK OPERATION ERROR
Probable Causes
DASD DEVICE
Failure Causes
DISK DRIVE
DISK DRIVE ELECTRONICS
Recommended Actions
PERFORM PROBLEM DETERMINATION... (1 Reply)
Discussion started by: gianlu
1 Replies
3. AIX
Hi,
I'm getting the errors below in the errpt report for a IBM Blade server. I'm guessing there's a problem with one of the disks but don't know how I can confirm this. Can anyone offer any suggestions?
Regards
Gareth (4 Replies)
Discussion started by: m223464
4 Replies
4. Solaris
Hello,
Can someone advise the proper procedure for replacing a mirrored disk in SVM. I have checked the docs and various websites but the procedure seems to vary. This is what I would do...
1. Remove the db replicas from the bad disk.
2. Detach it from the mirror
3. Clear it with... (4 Replies)
Discussion started by: Actuator
4 Replies
5. UNIX and Linux Applications
We are getting below error when processing a transaction through ESB.
I work for SOA admin and checked the JCA connection is working fine also code also working fine in other envs.
An unhandled exception has been thrown in the ESB system. The exception reported is:... (1 Reply)
Discussion started by: KuldeepSinghTCS
1 Replies
6. AIX
Hello,
after upgrading the memory to 96GB & 6 Dual Processor for P 550 ( and still not applied the parameters which some experienced posters said in post https://www.unix.com/aix/141835-oracle-database-running-slow-aix-nmon-topas-6.html )
I am getting system dumps. How to understand and... (1 Reply)
Discussion started by: filosophizer
1 Replies
7. Shell Programming and Scripting
Hi folks,
I am trying to send an email in Perl script with the below code.
I have written the code in Padre IDE and installed all the required modules(Mail::Sendmail) and executed the code.
It is neither showing errors nor giving the output. I havnt received an mail after running the below... (1 Reply)
Discussion started by: giridhar276
1 Replies
8. Shell Programming and Scripting
Hey guys.
I have created a script that mounts an external folder via sshfd, counts the number of files then do some delete and then counts the files again to get how many files have been deleted.
Then it sends the resault by mail.
My question is, how can i send via mail the errors on this... (2 Replies)
Discussion started by: Pizza
2 Replies
9. Filesystems, Disks and Memory
Hello,
On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active.
We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED.
... (1 Reply)
Discussion started by: terrya
1 Replies
10. AIX
Hello,
On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active.
We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED.
... (3 Replies)
Discussion started by: terrya
3 Replies
LEARN ABOUT OSF1
extendfs
extendfs(8) System Manager's Manual extendfs(8)
NAME
extendfs - Extends UFS file systems
SYNOPSIS
/sbin/extendfs [- s] [disk_blocks] device_name
DESCRIPTION
Use the extendfs command to increase the storage space in a UFS file system. The file system must not be mounted when you perform this
operation. To extend a mounted (in use) UFS file system, use the mount command with the -o extend option.
The procedure for increasing the storage space of a UFS file system is as follows: Look at the contents the /etc/fstab file to identify the
disk partition that maps to the file system. Ensure that there is available storage space on the target disk as follows: If LSM is in use
on your system, use LSM commands to increase the size of the LSM volume as described in the Logical Storage Manager guide. If LSM is not
in use on your system, use the disklabel command or the diskconfig graphical user interface to check the current size and use of partitions
on the disk. If there is adequate space on an adjacent partition, use the disklabel command to write the current label to a file as fol-
lows: # disklabel -r dsk4 > d4label Edit the disklabel file to change the size of the partition on which your UFS file system resides.
Increase the number of disk blocks on the partition and decrease the disk block size of the adjacent partition by an equivalent number.
Use the disklabel command with the -R option to write the revised label to the raw disk as follows: # disklabel -R /dev/rdisk/dsk4 d4label
When the disk label is revised, extend the file system using the extendfs command. You can either use the full extent of the newly sized
partition or extend the file system in stages. The following example commands show both methods. To extend the file system to use all the
available space, you specify the disk partition on which the file system resides, as follows: # extendfs /dev/disk/dsk4g To extend the
file system to use only part of the available space, you specify a number of disk blocks, as follows: # extendfs -s 300000 /dev/disk/dsk4g
The remainder of the extended partion is reserved for future use.
You can extend a file system as many times as necessary, up to the physical limit of the storage device. When no more space is available
on the storage device, you must back up the file system using the dump command and restore the file system to a storage device that has
more available space.
Once you have extended a file system, the operation cannot be reversed except by a back up and restore operation. Use the dump command to
back up the file system. You can then reset the partition sizes manually and restore the file system to the storage device.
ERRORS
The disklabel command produces output similar to that of the newfs command. If a list of disk blocks is not displayed on the terminal, the
command has failed. Verify the partition settings and the mount status of the target file system.
The disklabel command does not permit you to overwrite a partition if it is in use. Refer to the disklabel(8) reference page for more
information on label errors.
FILES
Specifies the command path.
RELATED INFORMATION
diskconfig(8), disklabel(8), mount(8), and fstab(4).
extendfs(8)