Connecting two machines with an ethernet bridge Post: 302469212

7 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

bridge on linux

Hello. I expirince some problems with bridging, i'm pretty new to that technology I've 2 nic's 1 - wireless rt2500 ra0 canyon cn511 card 2 - e100 intel, ifconfig ra0 up && iwconfig ra0 essid xxx channel x mode managed bring me wireless connection up then i do following: brctl addbr br0...

2. IP Networking

SNMP in a Bridge device

Hello all, recently we've created a Bridge on a machine that was being used as an snmp, and we haven't assigned an IP for the bridge interface, instead we've used one extra NIC to make all the administrations, but SNMP is simply not working, any one have a clue on how to do this? Thanks.

3. IP Networking

Need a bridge from an ethernet interface to a serial interface

This is my situation DOS pc serial cable (sl0) Linux Pc eth1 192.168.0.10 <-------------------->192.168.0.2 <------------>192.168.0.1 (router) I connected the linux pc and the dos pc with a SLIP (serial line internet protocol), so they can communicate in the sl0 interface. ...

4. AIX

vio server ethernet to vio client ethernet(concepts confusing)

Hi In the vio server when I do # lsattr -El hdisk*, I get a PVID. The same PVID is also seen when I put the lspv command on the vio client partition. This way Im able to confirm the lun using the PVID. Similarly how does the vio client partition gets the virtual ethernet scsi client adapter...

5. Ubuntu

Wireless Bridge/Repeater ?

I have a laptop running Ubuntu Netbook Remix. What I want to do is use it to connect to my routers wifi, and then plug my desktop into the laptops ethernet port and be hooked to my routers network without any NAT or ICS. Desktop>>>>>>Laptop/Wired>>Laptop/Wireless>>>>>Router I want it to look...

6. IP Networking

Create a Bridge for Qemu using only loopback

hello networking folks, i have 3 virtual machines that need to talk to each other How can i create a bridge to loopback ? -net tap,vlan=0,ifname=tap1 where tap1 is connected to lo:1 , tap2 is connected to lo:2 etc thx

7. OS X (Apple)

Hostroute => Bridge and IP-Forwardings

Hello unix community, Could anyone tell me what is the macosx command for: 1) ip hostroute to bridge: ip route add 188.40.1.40/32 dev br0 (linux command) /32 ist for netmask? Because I use /29. 2) and IP-Forwarding: net.ipv4.ip_forward = 1 (linux command) I hope anyone could...

LEARN ABOUT MOJAVE

dummynet

DUMMYNET(4)						   BSD Kernel Interfaces Manual 					       DUMMYNET(4)

NAME

     dummynet -- traffic shaper, bandwidth manager and delay emulator

DESCRIPTION

     dummynet is a system facility that permits the control of traffic going through the various network interfaces, by applying bandwidth and
     queue size limitations, implementing different scheduling and queue management policies, and emulating delays and losses.

     The user interface for dummynet is implemented by the dnctl program, so the reader is referred to the dnctl(8) manpage for a complete
     description of the capabilities of dummynet and on how to use it.

SEE ALSO

     dnctl(8), setsockopt(2), bridge(4), ip(4), sysctl(8)

HISTORY

     dummynet was initially implemented as a testing tool for TCP congestion control by Luigi Rizzo <luigi@iet.unipi.it>, as described on ACM Com-
     puter Communication Review, Jan.97 issue.	Later it has been then modified to work at the ip and bridging level, integrated with the IPFW
     packet filter, and extended to support multiple queueing and scheduling policies.

Darwin								 October 28, 2002							    Darwin