Connecting two machines with an ethernet bridge Post: 302468796

7 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

bridge on linux

Hello. I expirince some problems with bridging, i'm pretty new to that technology I've 2 nic's 1 - wireless rt2500 ra0 canyon cn511 card 2 - e100 intel, ifconfig ra0 up && iwconfig ra0 essid xxx channel x mode managed bring me wireless connection up then i do following: brctl addbr br0...

2. IP Networking

SNMP in a Bridge device

Hello all, recently we've created a Bridge on a machine that was being used as an snmp, and we haven't assigned an IP for the bridge interface, instead we've used one extra NIC to make all the administrations, but SNMP is simply not working, any one have a clue on how to do this? Thanks.

3. IP Networking

Need a bridge from an ethernet interface to a serial interface

This is my situation DOS pc serial cable (sl0) Linux Pc eth1 192.168.0.10 <-------------------->192.168.0.2 <------------>192.168.0.1 (router) I connected the linux pc and the dos pc with a SLIP (serial line internet protocol), so they can communicate in the sl0 interface. ...

4. AIX

vio server ethernet to vio client ethernet(concepts confusing)

Hi In the vio server when I do # lsattr -El hdisk*, I get a PVID. The same PVID is also seen when I put the lspv command on the vio client partition. This way Im able to confirm the lun using the PVID. Similarly how does the vio client partition gets the virtual ethernet scsi client adapter...

5. Ubuntu

Wireless Bridge/Repeater ?

I have a laptop running Ubuntu Netbook Remix. What I want to do is use it to connect to my routers wifi, and then plug my desktop into the laptops ethernet port and be hooked to my routers network without any NAT or ICS. Desktop>>>>>>Laptop/Wired>>Laptop/Wireless>>>>>Router I want it to look...

6. IP Networking

Create a Bridge for Qemu using only loopback

hello networking folks, i have 3 virtual machines that need to talk to each other How can i create a bridge to loopback ? -net tap,vlan=0,ifname=tap1 where tap1 is connected to lo:1 , tap2 is connected to lo:2 etc thx

7. OS X (Apple)

Hostroute => Bridge and IP-Forwardings

Hello unix community, Could anyone tell me what is the macosx command for: 1) ip hostroute to bridge: ip route add 188.40.1.40/32 dev br0 (linux command) /32 ist for netmask? Because I use /29. 2) and IP-Forwarding: net.ipv4.ip_forward = 1 (linux command) I hope anyone could...

LEARN ABOUT DEBIAN

tgt-setup-lun

tgt-setup-lun(8)					      System Manager's Manual						  tgt-setup-lun(8)

NAME

       tgt-setup-lun - creates a target, adds a device to the target and defines initiators that can connect to the target

SYNOPSIS

       tgt-setup-lun -d device -n target_name [initiator_IP1 initiator_IP2 ...] [-h]

DESCRIPTION

       Starts tgtd if necessary and creates a target according to the supplied target_name. The format of the target name is as follows:
       iqn.2001-04.com.<hostname>-<target_name> The target name must be unique.

       The  script then adds the requested device to the target. If specific IP addresses are defined, it adds them to the list of allowed initia-
       tors for that target. If no IP addresses is defined, it defines that the target accepts any initiator.

EXAMPLES

       Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81:
       tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81

       Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81 and 192.168.10.82:
       tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81 192.168.10.82

       Create a target that uses /dev/sdb1 and allows connections from any initiator:
       tgt-setup-lun -d /dev/sdb1 -n my_target

       Display help:
       tgt-setup-lun -h

AUTHOR

       Written by Erez Zilber

REPORTING BUGS

       Report bugs to <stgt@vger.kernel.org>

COPYRIGHT

       Copyright (C) Voltaire Ltd. 2008.

																  tgt-setup-lun(8)