Sponsored Content
Special Forums UNIX and Linux Applications Apache port has been shutdown and trying to up automatically Post 302468381 by senor.ram on Tuesday 2nd of November 2010 02:15:44 PM
Old 11-02-2010
Log is not generating for this, also port is used only for this. Please find the below details for more info.
Quote:
One of our web application is running in Linux and using apache web servers. Application is hosted in port 4080 (for soap requests) and port 9999, and its serving behind a vip and cname. Initially it was working fine in another server and recently (2 months back) we have moved to the new server and from there onwards often ports 4080 and 9999 are failing.
As per our analysis there is no problem in the load balancer where the vip is served and also we didn't see any issues in the apache/application logs. But after checking with networking teams we found that at the time of port failures, health check (status.html) for the vip is failing and that causing the issue. Sometimes within 5 mins ports are coming up automatically without taking any actions and sometimes its not coming up and we are restarting the apache services.
We could not able to figure out whats the problem here, could you please someone help me how I can find the root cause of the issue.
 

9 More Discussions You Might Find Interesting

1. Solaris

How to find the process that is using the port 80 and apache server.

How to find the process that is using the port 80 and apache server. When i used the command 'netstat -a|grep 80' it given that port 80 is in listening mode. I had used the following command: telnet localhost 80 GET / I had got some HTML script. But when I accessed the GUI ( url is... (7 Replies)
Discussion started by: vamshikrishnab
7 Replies

2. Windows & DOS: Issues & Discussions

Automatically shutdown windows

Hi, I'm trying to create a program on how to automatically shutdown my pc for a certain number of minutes. Well, actually i was able to make a very simple one by utilizing the shutdown.exe of windows. Now i'm trying to improve it by adding a function such that i can program my windows to... (2 Replies)
Discussion started by: mcoblefias
2 Replies

3. AIX

aix shutdown automatically

hi, My AIX (5.3) machine is getting shutdown automatically. After restarting the machine, its screen goes black and it shows in green: Unmounting the file system.... bringing down the network interface en0 ln0.......halt completed and system shutdowns. Can... (8 Replies)
Discussion started by: Vanit
8 Replies

4. UNIX for Dummies Questions & Answers

Script to force Oracle database shutdown when shutdown immediate does not work

I have Oracle 9i R2 on AIX 5.2. My Database is running in shared server mode (MTS). Sometimes when I shutdown the database it shutsdown cleanly in 4-5 mints and sometimes it takes good 15-20 minutes and then I get some ora-600 errors and only way to shutdown is by opening another session and... (7 Replies)
Discussion started by: aixhp
7 Replies

5. UNIX for Dummies Questions & Answers

Server has more TIME_WAIT connections in Apache(port 80)

Server has more TIME_WAIT connections in Apache(port 80) Hi, My webserver has 16GB of RAM and CentOS 5.5, Apache 2.2.3, It's shared webserver used of for webhosting. I have optmized the server as : <IfModule prefork.c>... (4 Replies)
Discussion started by: chandranjoy
4 Replies

6. Web Development

Redirect to diff port on apache

Hi, I'm running both mail (webmail port = 8080) and web (http = 80) on same box. i am able to redirect as below without any problem. From: http://mail.abc.com To: http://www.abc.com:8080 I did the above with a simple virtualhost and redirect directive. But my requirement is to have same... (1 Reply)
Discussion started by: reddyr
1 Replies

7. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies

8. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies

9. Red Hat

Serial Port Setting Automatically changes

I am trying to change the setting of serial port baud rate in Red Hat Linux 5.9 by the following command. >> stty 9600 cs8 -parenb -ixon -cstopb -echo -F /dev/ttyS0 The serial port will be used by our custom application in 2 separate servers which are the replica of one another. The port setting... (2 Replies)
Discussion started by: Anjan Ganguly
2 Replies
OCF_HEARTBEAT_APACHE(7) 					OCF resource agents					   OCF_HEARTBEAT_APACHE(7)

NAME
ocf_heartbeat_apache - Manages an Apache web server instance SYNOPSIS
apache [start | stop | status | monitor | meta-data | validate-all] DESCRIPTION
This is the resource agent for the Apache web server. This resource agent operates both version 1.x and version 2.x Apache servers. The start operation ends with a loop in which monitor is repeatedly called to make sure that the server started and that it is operational. Hence, if the monitor operation does not succeed within the start operation timeout, the apache resource will end with an error status. The monitor operation by default loads the server status page which depends on the mod_status module and the corresponding configuration file (usually /etc/apache2/mod_status.conf). Make sure that the server status page works and that the access is allowed *only* from localhost (address 127.0.0.1). See the statusurl and testregex attributes for more details. See also http://httpd.apache.org/ SUPPORTED PARAMETERS
configfile The full pathname of the Apache configuration file. This file is parsed to provide defaults for various other resource agent parameters. (unique, optional, string, default /etc/apache2/httpd.conf) httpd The full pathname of the httpd binary (optional). (optional, string, default /usr/sbin/httpd) port A port number that we can probe for status information using the statusurl. This will default to the port number found in the configuration file, or 80, if none can be found in the configuration file. .sp (optional, integer, no default) statusurl The URL to monitor (the apache server status page by default). If left unspecified, it will be inferred from the apache configuration file. .sp If you set this, make sure that it succeeds *only* from the localhost (127.0.0.1). Otherwise, it may happen that the cluster complains about the resource being active on multiple nodes. (optional, string, no default) testregex Regular expression to match in the output of statusurl. Case insensitive. (optional, string, default exists, but impossible to show in a human readable format (try grep testregex)) client Client to use to query to Apache. If not specified, the RA will try to find one on the system. Currently, wget and curl are supported. For example, you can set this parameter to "curl" if you prefer that to wget. (optional, string, no default) testurl URL to test. If it does not start with "http", then it's considered to be relative to the Listen address. (optional, string, no default) testregex10 Regular expression to match in the output of testurl. Case insensitive. (optional, string, no default) testconffile A file which contains test configuration. Could be useful if you have to check more than one web application or in case sensitive info should be passed as arguments (passwords). Furthermore, using a config file is the only way to specify certain parameters. .sp Please see README.webapps for examples and file description. (optional, string, no default) testname Name of the test within the test configuration file. (optional, string, no default) options Extra options to apply when starting apache. See man httpd(8). (optional, string, no default) envfiles Files (one or more) which contain extra environment variables. If you want to prevent script from reading the default file, set this parameter to empty string. (optional, string, default /etc/apache2/envvars) SUPPORTED ACTIONS
This resource agent supports the following actions (operations): start Starts the resource. Suggested minimum timeout: 40s. stop Stops the resource. Suggested minimum timeout: 60s. status Performs a status check. Suggested minimum timeout: 30s. monitor Performs a detailed status check. Suggested minimum timeout: 20s. Suggested interval: 10. meta-data Retrieves resource agent metadata (internal use only). Suggested minimum timeout: 5. validate-all Performs a validation of the resource configuration. Suggested minimum timeout: 5. EXAMPLE
The following is an example configuration for a apache resource using the crm(8) shell: primitive p_apache ocf:heartbeat:apache op monitor depth="0" timeout="20s" interval="10" SEE ALSO
http://www.linux-ha.org/wiki/apache_(resource_agent) AUTHOR
Linux-HA contributors (see the resource agent source for information about individual authors) resource-agents UNKNOWN 03/09/2014 OCF_HEARTBEAT_APACHE(7)
All times are GMT -4. The time now is 01:34 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy