I need sort Cisco configs to report but i cannot do the script to made this:
#### INPUT #####
Code:
config-register 0x2102
version 12.2
!
hostname Router
!
interface Ethernet0
description Red LAN
ip address 192.168.1.1 255.255.255.0
no cdp enable
!
interface Serial0
description Red WAN
ip address 172.16.1.1 255.255.255.0
!
interface loopback0
shutdown
!
line con 0
exec-timeout 20 0
stopbits 1
!
line vty 0 4
exec-timeout 20 0
transport preferred none
!
end
### OUTPUT ###
Code:
config-register 0x2102
version 12.2
hostname Router
interface Ethernet0 description Red LAN
interface Ethernet0 ip address 192.168.1.1 255.255.255.0
interface Ethernet0 no cdp enable
interface Serial0 description Red WAN
interface Serial0 ip address 172.16.1.1 255.255.255.0
interface loopback0 shutdown
line con 0 exec-timeout 20 0
line con 0 stopbits 1
line vty 0 4 exec-timeout 20 0
line vty 0 4 transport preferred none
end
Can someone help me with this?, I was trying with awk, grep, etc but I failed.
Thanks
Last edited by Scott; 10-27-2010 at 03:42 PM..
Reason: Please use code tags
I'm trying to write a login script to ssh into a cisco switch that will run some command remotely. Similar to this expect script located here:
SSH login expect shell script to supply username and password
However, that script does not work with cisco ios. Anyway know what the best way to... (1 Reply)
Hi,
I'm somewhat new to unix OS
and I'm at course for programmers in my country.
and in the course we learn unix and how to script in unix. of course we just started and we learned only the very basic, but I'm a really computer freak and I looking for a way to make the course easier on all of... (8 Replies)
hi All, is there a way in linux to loop thru all variables sourced?
i have a set configs like
A=100
b=200
c=400
i can add the above lines to a file and source - so that $A will be 100 .. like wise
now when i do a cut -c 1-2 file.txt |sort | uniq -c on a file it returns me
A 100
B 50
c... (1 Reply)
Hello all -
I am to this forum and fairly new in learning unix and finding some difficulty in preparing a small shell script. I am trying to make script to sort all the files given by user as input (either the exact full name of the file or say the files matching the criteria like all files... (3 Replies)
I know there are better ways to do this.
I prefer snmp. I do not have the proper perl modules loaded on the platorm. Snmp isnt loaded on the platform. Telnet is not an option. I need to write an expect script to pull cisco equipment configs.
The following code is executed once I gain... (0 Replies)
Is there an easy way to stack Cisco 2960-S and Cisco 2960X switches? If you have no idea, follow this:
1. Stacking is not supported on switches running the LAN Lite image. All switches in the stack must be running the LAN Base image.
2. In a mixed stack of Catalyst 2960-X and Catalyst 2960-S... (0 Replies)
Discussion started by: Ayaerlee
0 Replies
LEARN ABOUT NETBSD
route.conf
ROUTE.CONF(5) BSD File Formats Manual ROUTE.CONF(5)NAME
route.conf -- static routes config file
DESCRIPTION
The route.conf file is read by the staticroute rc.d script during system start-up and shutdown, and is intended for adding and removing
static routes.
FILE FORMAT
Lines starting with a hash ('#') are comments and ignored. Lines starting with a plus sign ('+') are run during start-up, while lines start-
ing with a minus sign ('-') are run during system shutdown. If a line starts with a '!', the rest of the line will get evaluated as a shell
script fragment. All other lines are passed to route(8). During start-up, they are passed behind a ``route add -'' command and during shut-
down behind a ``route delete -'' command.
FILES
/etc/route.conf The route.conf file resides in /etc.
/etc/rc.d/staticroute
rc.d(8) script that parses route.conf.
EXAMPLES
In this example, the interface for the desired routing changes is set, the IP address on that interface is determined, and a route is added
during startup, or deleted during system shutdown.
# Set interface and determine current IP address for added route.
!ifname=bnx0
!ipaddr=$(/sbin/ifconfig ${ifname} | awk '$1 == "inet" {print $2}')
net 10.10.1 -interface ${ipaddr}
In this example, IP forwarding is turned on during start-up, and a static route added for 192.168.2.0. During system shutdown, the route is
removed and IP forwarding turned off.
# Turn on/off IP forwarding.
+sysctl -w net.inet.ip.forwarding=1
-sysctl -w net.inet.ip.forwarding=0
net 192.168.2.0 -netmask 255.255.255.0 192.168.150.2
SEE ALSO rc.conf(5), rc(8), route(8)BSD May 1, 2012 BSD
10-27-2010
,