I think that you need to run something like:
on the DOS machine, or just add 192.168.0.1 as the default gateway.
Where this is added though will depend on the TCP software that you are using.
Howto check if a ethernet interface is up?
It's impossible to determine via the ipaddress i have learned, or?
Can someone please give me a hint on howto do?
Environment == Linux x86 GNU GCC.
:D
regards
Esaia (2 Replies)
Hi,
During the installation of solaris suppose I am configuring one ethernet interface that is primary but on my server there are 4 ethernet interfaces,because all other interface not configured,
what is way to find out how many ethernet interfaces are there on Server, (6 Replies)
Dear all,
I am a newbie in solaris and I need your advice.
I have a Solaris version 5.9 installed on Sunfire V240.
I am able to ssh the machine from putty remotely.
My problem is that I cannot see the display from KVM switch I have connected to it. I need also to be able to see the GUI... (2 Replies)
Hi all
I have installed a demo version of SCO OpenServer 5.0.2, I finally found it is Desktop Interface, I would like to know how to change its interface to dos based interface?
If you have any ideas, please tell me then. Thank you (2 Replies)
Hi,
For one of my application(Linux 2.6) I am using a netlink socket to get the interface changes notification.
socket(PF_NETLINK, SOCK_RAW, NETLINK_ROUTE)
Application receives netlink notification for Ethernet, bond interfaces but there is no notification about bridge interfaces changes. ... (6 Replies)
Hi,
is there any method to check the interface collisions on ethernet NIC in AIX. I know that in Solaris it's netstat -i but I've written that in AIX it doesn't show this.
Thanks®ards,
p (1 Reply)
Hi
Had an old ML590 with RS232 serial card that stopped working (spindle that advance ribbon broke) so I purchased a working used on ebay.
Printer powers up and seems fine. Put serial board from old printer in working ebay unit but no printing happens.
Does anyone know if there are any... (0 Replies)
hello,
I have a Linux server with two interfaces eth0 and eth1. I configured two IP addresses from two different networks on 2 interfaces, and I connected both interfaces on two different switches.
the IP address of eth0 is responding without problem to ping from equipment of its home network,... (25 Replies)
Hi Folks,
Here is one for the real Solaris aficionados on the site;
I have a T5240 and have to create an I/O domain with access to the serial port, in this case /dev/term/a and although I have been through the documentation I'm having some issues in identifying the device to assign.
What I... (2 Replies)
Discussion started by: gull04
2 Replies
LEARN ABOUT CENTOS
unbound-streamtcp
unbound-streamtcp(1) unbound unbound-streamtcp(1)NAME
unbound-streamtcp - unbound DNS lookup utility
SYNOPSIS
unbound-streamtcp [-unsh] [-f ipaddr[@port]] name type class
DESCRIPTION
unbound-streamtcp sends a DNS Query of the given type and class for the given name to the DNS server over TCP and displays the response.
If the server to query is not given using the -f option then localhost (127.0.0.1) is used. More queries can be given on one commandline,
they are resolved in sequence.
The available options are:
name This name is resolved (looked up in the DNS).
type Specify the type of data to lookup.
class Specify the class to lookup for.
-u Use UDP instead of TCP. No retries are attempted.
-n Do not wait for the answer.
-s Use SSL.
-h Print program usage.
-f ipaddr[@port]
Specify the server to send the queries to. If not specified localhost (127.0.0.1) is used.
EXAMPLES
Some examples of use.
$ unbound-streamtcp www.example.com A IN
$ unbound-streamtcp -f 192.168.1.1 www.example.com SOA IN
$ unbound-streamtcp -f 192.168.1.1@1234 153.1.168.192.in-addr.arpa. PTR IN
EXIT CODE
The unbound-streamtcp program exits with status code 1 on error, 0 on no error.
AUTHOR
This manual page was written by Tomas Hozza <thozza@redhat.com>.
NLnet Labs Mar 21, 2013 unbound-streamtcp(1)