I have just installed a second hard disk on a FreeBSD machine v8.0. It is seen as new hardware:
However it is not listed in fstab where "ad4" would have been expected:
When doing "mount -a" no response is given, but certainly the new hard drive was not mounted, because fstab is still the same table as above. What do I do to mount this hard drive?
I have been using FreeBSD (currently 4.10, yes yes i havent updated it for a few months), and unfortunately when initially installing it onto my laptop, i made the mistake of only assigning it 3.5 GB and time has passed and I now find myself withonly 300 something MB left on the chunk, i want to... (2 Replies)
Hi Engg. ! :mad:
I have a harddisk on which SCO UNIX Open Server was installed. There was some data (in .dbf format) on it. Present condition of HDD is that it is not booting. Now I want to mount this HDD through other HDD on which SCO UNIX Open Server is installed by attaching... (0 Replies)
I have two unix workstations. One crashed :( , but the other is still operating efficiently. We have a Lacie external hard drive attached to the workstation that failed. I would like to mount the external drive to the workstation that is still functioning. I am not very familiar with how to do... (1 Reply)
I have a 1TB hard disk that I had partitioned on a Sun clone and had 7 partitions of 137GB a piece. (Using a USB to SATA adaptor)
I then had loaded a new hard disk on my laptop (T60...Lenova) with Solaris 10 X86. I tried to mount the hard disk but it kept telling me the mount point was busy and I... (2 Replies)
Can anyone please walk me through how to mount an external parallel (or scsi) hard drive in visualize C3000 machine? I also would like to mount "/var/sallie" directory in that external drive. My "/var/sallie" directory is running out of space so I would like to mount an external hard drive so that... (0 Replies)
Hi guys,
Right off the bat i'm gonna say that i'm a total linux noob. this is the second time i've seen the interface... anyway that being said, here is my issue.
I have a user that needs to get data off a hard drive. This hard drive won't mount in windows xp. Last time this happened one of... (1 Reply)
When mounting a USB stick or pen drive on a FreeBSD machine I always issue the following command:
mount -t msdosfs /dev/da0s1 /mnt
Something I have always wondered is what the option msdosfs stands for and more importantly, why it is necessary. (7 Replies)
Sun 280R, Solaris 5.8....
I have inserted a 2nd hard drive on my system. 'format' recognized the disk, but I cannot figure out how to access the disk. Any help is appreciated! (3 Replies)
hi
I've a fresh installation of SCO 5.0.7 on the IDE hard disk.
For SCSI hard disk I can declare, for example blc disk driver using:
# mkdev hd 0 SCSI-0 0 blc 0but it works for IDE hard disk? (3 Replies)
Hi all,
I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it... (23 Replies)
Discussion started by: shen747
23 Replies
LEARN ABOUT DEBIAN
installboot
installboot(1M)installboot(1M)NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)