I am setting up a vfstab but need some help, here is the file systems
i need to set up the vfstab to boot from c0t1d0 and then slice 0, but i am not sure how the vfstab will look, can you please urgently help as i need to get this host up ASAP.
If i wish to make a mount permanent, is it /etc/vfstab that i have to the entry add to? If so does anybody know the syntax, ie. is it tab or space delimited ? etc etc
any help would be greatly appreciated (3 Replies)
Hello all... I have a Ultra 60 that that is used for connecting a large Xerox printer to the network. This computer takes PDF's and converts them to tiffs and sends them back to a pc :p . In order to transfer data back and forth a mount is manually performed on the UNIX box. The mount of course is... (1 Reply)
In the end of /etc/vfstab file :
/dev/md/dsk/d30 /dev/md/dsk/d30 /odb0 ufs no no -
/dev/md/dsk/d40 /dev/md/dsk/d40 /odb1 ufs no no -
After boot filesystems /odb0 and /odb1 don't mount.
Also they don't mount after comand mount -a
But if i'm enter... (1 Reply)
Hi all,
I have been trying to figure out a way to mount swap on /tmp at a stage early than the default script that does it...
If anyone knows how it can be done pls pls help me!!!!!
I have been struggling a lot for it
Secondly, continuing with the same issue...
I wanted to know if the... (4 Replies)
How can I specify and the -O (overlay option) in the vfstab ?
Also can you specify the overlay option to the mount options for a Vertias cluster NFS service group ? (0 Replies)
I created a file system earth in /earthpool (zpool). I mounted the file system on a directory /earth. But, when I reboot my machine it doesn't load the file systems and the zpool and zfs shows no pools available and no datasets respectively. I am using Solaris 10 running on X4500. Could you... (5 Replies)
I have Solaris 10 Express that I installed on a PC with two drives. It was on drive 1 (with the boot drive being drive 0). Linux was in a different parition and my boot options where managed by grub.
The Solaris parition's /etc/vfstab referenced the root, user, etc.. disks as c0d1sX. But... (6 Replies)
what is the difference between the /etc/vfstab and /etc/mnttab? when i check both files, the content is almost the same. can you enlighten me? what i know is /etc/vfstab is used for hard mounts. (4 Replies)
Please see my vfstab entries below..
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
#
fd - /dev/fd fd - no -
/proc - /proc proc - no ... (3 Replies)
Discussion started by: Tuxidow
3 Replies
LEARN ABOUT MINIX
vfstab
vfstab(4) File Formats vfstab(4)NAME
vfstab - table of file system defaults
DESCRIPTION
The file /etc/vfstab describes defaults for each file system. The information is stored in a table with the following column headings:
device device mount FS fsck mount mount
to mount to fsck point type pass at boot options
The fields in the table are space-separated and show the resource name (device to mount), the raw device to fsck (device to fsck), the
default mount directory (mount point), the name of the file system type (FS type), the number used by fsck to decide whether to check the
file system automatically (fsck pass), whether the file system should be mounted automatically by mountall (mount at boot), and the file
system mount options (mount options). (See respective mount file system man page below in SEE ALSO for mount options.) A '-' is used to
indicate no entry in a field. This may be used when a field does not apply to the resource being mounted.
The getvfsent(3C) family of routines is used to read and write to /etc/vfstab.
/etc/vfstab can be used to specify swap areas. An entry so specified, (which can be a file or a device), will automatically be added as a
swap area by the /sbin/swapadd script when the system boots. To specify a swap area, the device-to-mount field contains the name of the
swap file or device, the FS-type is "swap", mount-at-boot is "no" and all other fields have no entry.
EXAMPLES
The following are vfstab entries for various file system types supported in the Solaris operating environment.
Example 1: NFS and UFS Mounts
The following entry invokes NFS to automatically mount the directory /usr/local of the server example1 on the client's /usr/local directory
with read-only permission:
example1:/usr/local - /usr/local nfs - yes ro
The following example assumes a small departmental mail setup, in which clients mount /var/mail from a server mailsvr. The following entry
would be listed in each client's vfstab:
mailsvr:/var/mail - /var/mail nfs - yes intr,bg
The following is an example for a UFS file system in which logging is enabled:
/dev/dsk/c2t10d0s0 /dev/rdsk/c2t10d0s0 /export/local ufs 3 yes logging
See mount_nfs(1M) for a description of NFS mount options and mount_ufs(1M) for a description of UFS options.
Example 2: pcfs Mounts
The following example mounts a pcfs file system on a fixed hard disk on an x86 machine:
/dev/dsk/c1t2d0p0:c - /win98 pcfs - yes -
The example below mounts a Jaz drive on a SPARC machine. Normally, the volume management daemon (see vold(1M)) handles mounting of remov-
able media, obviating a vfstab entry. If you choose to specify a device that supports removable media in vfstab, be sure to set the mount-
at-boot field to no, as below. Such an entry presumes you are not running vold.
/dev/dsk/c1t2d0s2:c - /jaz pcfs - no -
For removable media on a SPARC machine, the convention for the slice portion of the disk identifier is to specify s2, which stands for the
entire medium.
For pcfs file systems on x86 machines, note that the disk identifier uses a p (p0) and a logical drive (c, in the /win98 example above) for
a pcfs logical drive. See mount_pcfs(1M) for syntax for pcfs logical drives and for pcfs-specific mount options.
Example 3: CacheFS Mount
Below is an example for a CacheFS file system. Because of the length of this entry and the fact that vfstab entries cannot be continued to
a second line, the vfstab fields are presented here in a vertical format. In re-creating such an entry in your own vfstab, you would enter
values as you would for any vfstab entry, on a single line.
device to mount: svr1:/export/abc
device to fsck: /usr/abc
mount point: /opt/cache
FS type: cachefs
fsck pass: 7
mount at boot: yes
mount options:
local-access,bg,nosuid,demandconst,backfstype=nfs,cachedir=/opt/cache
See mount_cachefs(1M) for CacheFS-specific mount options.
Example 4: Loopback File System Mount
The following is an example of mounting a loopback (lofs) file system:
/export/test - /opt/test lofs - yes -
See lofs(7FS) for an overview of the loopback file system.
SEE ALSO fsck(1M), mount(1M), mount_cachefs(1M), mount_hsfs(1M), mount_nfs(1M), mount_tmpfs(1M), mount_ufs(1M), swap(1M), getvfsent(3C)
System Administration Guide: Basic Administration
SunOS 5.10 21 Jun 2001 vfstab(4)