Sponsored Content
Operating Systems Solaris hostname.bge0 failing after creating bge0:1 and rebooting Post 302461601 by System Shock on Monday 11th of October 2010 07:10:56 PM
Old 10-11-2010
Quote:
Originally Posted by Friedrich
The whole reason I wanted two IP addresses on this network adapter is so both old.com and new.com could use port 80. They could each have there own port 80.

I can share with you exactly what I am doing. It is some software I used as a student and wanted just to get it working as a real life example instead of just theoretical.


Thanks again.

---------- Post updated at 07:02 PM ---------- Previous update was at 06:59 PM ----------

Proxy By Hostname Configuration [OCLC]

And pay attention to the Solaris link in step 6.

Sorry for the extra post but it said I couldn't post a link yet.

Please share any remarks if you can.
Thank you.

But you only have one port 80. You can have as many IPs as you want, but that doesn't mean a second port 80 is going to open up because of the new IP.
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

soft rebooting

When I do a hard reboot, the system recognizes both the ttya and the ttyb, but when I do a hard reboot, it only doesn't recognize the ttyb. Is there a way I can fix this??? Thanks!:confused: (5 Replies)
Discussion started by: nattie_h
5 Replies

2. UNIX for Dummies Questions & Answers

Solaris - unknown hostname - how can I change hostname?

Hello, I am new to Solaris. I am using stand alone Solaris 10.0 for test/study purpose and connecting to internet via an ADSL modem which has DHCP server. My Solaris is working on VMWare within winXP. My WinXP and Solaris connects to internet by the same ADSL modem via its DHCP at the same... (1 Reply)
Discussion started by: XNOR
1 Replies

3. Solaris

Solaris 10 x86 bge0 network problem

Hi, Server --Dell Poweredge 2550. OS--Solaris 10 Network switch --cisco --port setting- 1000Mbps full duplex The network LED goes off when the solaris console screen comes up but prior to that(while booting is in progess) it is green. The system is not able to come on network,ping to switch... (3 Replies)
Discussion started by: anilzoc
3 Replies

4. AIX

hmc not rebooting

Anyone faced this? I rebooted the HMC through command line after patch installation (hmcshutdown -t now -r) The strange thing happened was the hmc never rebooted, I was not able to connect it through graphical view or through ssh, but the session through which i issued the command was still... (4 Replies)
Discussion started by: balaji_prk
4 Replies

5. Solaris

Server Rebooting frequently

Deall All, I have facing some problem. I have a Sun 4500 Server at the customer place. Now the server is not booting mean's once the server is coming up it is automatically rebooting. As this is the critical server for the customer that is use for production . Can this be solved by... (10 Replies)
Discussion started by: sudhansu
10 Replies

6. Solaris

bge0 is UP but not RUNNING

Hi people, I have a solaris OS system. I configured its interfaces. They are UP but not in RUNNING status except loopback interface. I made the interfaces DOWN and UP again. The other side of the interfaces (switch ports) are UP. Does anyone have any idea? What may cause this problem, How can... (8 Replies)
Discussion started by: hubatuwang
8 Replies

7. Emergency UNIX and Linux Support

HP UX - ILO Console hostname different than Machine Hostname...

Hi All, So we added a new HP-UX 11.31 machine. Copied OS via Ignite-UX (DVD)over from this machine called machine_a. It was supposed to be named machine_c. And it is when you log in...however when I'm in the ILO console before logging in, it says: It should say: What gives? And how do... (4 Replies)
Discussion started by: zixzix01
4 Replies

8. AIX

rebooting HMC

Hi, I would like to know wheather rebooting HMC will impact on Management Systems or Lpar inside it is showing? or I have to shutdown LPAR then only reboot HMC. (7 Replies)
Discussion started by: manoj.solaris
7 Replies

9. What is on Your Mind?

Rebooting a career

Apologies if this is not the correct place to post this. I used to have a job supporting several custom applications that ran on Unix platforms. I used shell scripting, sed, awk, and SQL, but all on a pretty basic level. I also performed non-technical tasks like helping with project management,... (4 Replies)
Discussion started by: intranslation
4 Replies

10. UNIX for Advanced & Expert Users

Hostname -f hostname: Unknown host

deleted (0 Replies)
Discussion started by: hce
0 Replies
bubbros-server(6)						   Games Manual 						 bubbros-server(6)

NAME
bubbros-server - the bub-n-bros server. SYNOPSIS
bubbros-server [ level-file.bin ] [options] DESCRIPTION
bubbros-server starts an http server that acts as a control panel for the server. The server listens on port 8000 by default. The url for the control panel is http://server:port/0xN where 0xN is a random hex number (acts as minimal protection). This url is printed when the server starts. You can start and view games and kill the server from this panel. The control panel also allows you to type in the address of a server to connect to, the script will then open a client to that server. The http server also servers java applet clients for those players who wish to use one. When a game is started the script opens a port for the game server. This port can then be connected to by a client. Clients autodetect servers running on the local network with UDP ping on port 8056. Connection forming The client forms a tcp connection to the server. Or, when using the metaserver, the server forms a connection to the client. If this fails, the client and server try a simultaneous SYN connect. This sometimes works if the server and client are behind firewalls. The server then tries to transmit the data over udp. If it gets no response from the client it will fall back to the existing tcp connection. OPTIONS
-b N, --begin N, --start N Start at board (level) number N. The default is 1. See also the -s option. -h, --help Display help. -i, --infinite Restart the server at the end of the game. Normally the server quits after a certain period of inactivity. This is useful when used with the -m option to make a public server that is available for a long time. -l N, --lives N Limit number of lives to N. If this option is not specified the number of lives will be infinite. -m, --metaserver Register server with the Metaserver (currently) at codespeak.net:8050. This makes your server visible to everybody, and also facil- itates joining through a fascistic firewall. --port TYPE=N Sets default listening ports. If type is LISTEN , sets the game server port to N. The game server port is chosen randomly by default. If the type is HTTP , sets the http server port to N. The http server port defaults to 8000. Another port will be chosen if none was specified and 8000 is already in use. The server also listens to UDP ping on port 8056. -s N, --step N Increase board number with N when a board is completed. Defaults to 1. see also the -b option. OUTPUT
The server outputs helpful debug information concerning the http and game servers. SEE ALSO
bubbros(6) bubbros-client(6) December 7, 2007 bubbros-server(6)
All times are GMT -4. The time now is 07:29 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy