Resizing only works in place. I'd just create a new filesystem and copy files into it.
To get it to boot though, you'll need to install grub on the new drive. This can be done from a linux livecd. Be sure to back up your grub configuration files in case installing grub stomps over them.
Last edited by Corona688; 10-08-2010 at 07:46 PM..
Hi All,
While my LINUX SERVER installed we didnt' used all the space for partitions. with what tool I can create a new partition or mount point to use the free space.
I tried the command fdisk and diskdruid. They are not working.
Thanks in advance
With Best regards,
Varma. (2 Replies)
Have a solaris x86 running solaris 9.
Root disk - logical - mirrored.
I added 2 more disks today - and I have mirrored them using array configuration utility.
I did a reconfiguration boot - and now I can see the logical disk using format:
I then partitioned this the way I wanted (I hope)... (4 Replies)
I have 3 disks to partition in following file system.
c1t1d0 = 72gb
/prod1
/prod2
/prod3
/prod4
/prod5
I am first time using "format" command to do this. How can i name with specified size.
-Adeel (1 Reply)
hi guys,
I've got a strange issue, may be one of you has experienced this.
SunOS 5.10 Generic_118833-33 sun4u sparc SUNW,Sun-Fire-V440
everything is mirrored.
My issue is that I have a umpty directory but seems to have data on. Let me show you
# df -h /data
Filesystem size used... (10 Replies)
I want to skip the first cylinder (first 1 MB infact) while I partition my disk using fdisk as it is required that the disk partition to be used (for Oracle RAC Installation) must skip the first 1Mb to avoid overwriting the disk VTOC. The way I am using is:
Command (m for help): n
Command... (2 Replies)
Hi Guys,
when performing a disk partition, can any file system other than root be giving to slice 0 or must slice0 hold only root? I am confused about this.
Any clarification will be greatly appreciated.
Thanks Guys (4 Replies)
Hello,
I am a new member of the forum.
I need an idea on how to partition the disk.
My situation is as follows:
I have two 3TB disks ognuno.In 6TB total then, but I have to do to force a RAID 1 so my space will be 3TB. I'll have to force install RedHat 5.8 and liquids is to be taken in... (4 Replies)
Hello All,
I have a Red Hat Linux 5.9 Server installed with one hard disk & 2 Partitions created on it as follows,
/boot - Linux Partition & another is
LVM - One VG & under that 5-6 Logical volumes(var,opt,home etc).
Here my requirement is to take out 1GB of space from LVM ( Any logical... (5 Replies)
Hello,
# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sr0 11:0 1 1024M 0 rom
sda 8:0 0 38.2G 0 disk
├─sda1 8:1 0 500M 0 part /boot
└─sda2 8:2 ... (2 Replies)
Discussion started by: centosadmin
2 Replies
LEARN ABOUT NETBSD
apmlabel
APMLABEL(8) BSD System Manager's Manual APMLABEL(8)NAME
apmlabel -- update disk label from Apple Partition Map
SYNOPSIS
apmlabel [-fqrw] device
DESCRIPTION
apmlabel is used to update a NetBSD disk label from the Apple Partition Map found on disks that were previously used on Mac OS systems (or
other APM using systems).
apmlabel scans the APM contained in the first blocks of the disk and generates additional partition entries for the disk from the entries
found. Driver and patches partitions are ignored.
Each APM entry which does not have an equivalent partition in the disk label (equivalent in having the same size and offset) is added to the
first free partition slot in the disk label. A free partition slot is defined as one with an fstype of 'unused' and a size of zero ('0').
If there are not enough free slots in the disk label, a warning will be issued.
The raw partition (typically partition c, but d on i386 and some other platforms) is left alone during this process.
By default, the proposed changed disk label will be displayed and no disk label update will occur.
Available options:
-f Force an update, even if there has been no change.
-q Performs operations in a quiet fashion.
-r In conjunction with -w, also update the on-disk label.
-w Update the in-core label if it has been changed.
SEE ALSO disklabel(8), dkctl(8), pdisk(8)HISTORY
The apmlabel command appeared in NetBSD 5.0.
BSD May 19, 2007 BSD