RHEL4 easyRAID problem 2tb gpt xfs Post: 302461093

9 More Discussions You Might Find Interesting

1. Red Hat

X11 forwarding problem between 2 RHEL4 machines with SSH

X11 forwarding problem between 2 RHEL4 machines with SSH Already configured the following on both machines under /etc/ssh Under sshd_config: UsePAM no AllowTcpForwarding yes Under ssh_config: ForwardAgent yes ForwardX11 yes ForwardX11Trusted yes ----------------------------- Using...

2. Red Hat

Problem on RHEL4.7 mtrr

I've got a strange message in /var/log/messages : "kernel: mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining " and when i look in the /proc/mtrr I've got that : "reg00: base=0xd0000000 (3328MB), size=196864MB: uncachable, count=1 reg01: base=0xe0000000...

3. Filesystems, Disks and Memory

Gfs2 vs xfs vs ext4

Looking for suggestions as to which filesystem to go with. I currently use gfs2 on hosts with 3.4tb useable. I understand gfs2 is being left behind but xfs and ext4 are not quite certified completely on CentOS 5.2. I have email storage hosts that have a decent i/o requirement and 12TB usable after...

4. UNIX for Dummies Questions & Answers

Delete gpt signatures

Hi Can anyone tell me how to delete GPT signatures in linux/unix. Thanks Tannu

5. Boot Loaders

GPT/Protective MBR problem...

Hi, short thing: I've done something I didn't know what happens; bad thing: I did it with my partition table. :D My OS is Ubuntu 10.10. I've used GPT and now want to convert it to MBR with gdisk. I started gdisk, chose 'r' for "transformation options" and chose 'g' to "convert GPT into MBR...

6. Fedora

Disk Paritioning Scheme--GPT or MBR

Hi, I just built myself a new machine which has an ASUS motherboard with is UEFI based. I noticed after I installed Fedora 17 that my sda is MBR and my sdb is GPT: sda is a ssd drive. Should the ssd drive be GPT or is MBR okay? sda is 60Gb drive.

7. Windows & DOS: Issues & Discussions

Installing Windows 7 on a GPT drive

Hello, My hard drive was formatted with GPT. It is part of a volume group and has two logical volumes on it. Is it possible to convert the drive to MBR? If so, how would I got about doing it? I know there are programs out there that do it, but I have volume groups with LVM's so I am wondering if...

8. Hardware

320GB HD change and recognize as 2TB Problem

Hi, I would like to ask if someone experince this problem on a Hard disc. I had a 320 GB WD Blue 3.5 Hard disc. When i plug on my PC BIOS detect it for a while and dis-appear. Luckily sometimes i can check it on a bootable CD or attach on other LINUX PC but for a while it will dis-appear. As if...

9. Red Hat

GPT Partitions

(Don't you hate being on holiday and being the only IT person in the family?) Got a wonderful thanksgiving surprise .. dead windows-8 laptop with "important" unbacked-up data. No worries, I have my my fedora labtop and a magical SATA to USB converter. Plugged in the drive, and ... can't mount...

LEARN ABOUT SUNOS

findfs

FINDFS(8)						       System Administration							 FINDFS(8)

NAME

       findfs - find a filesystem by label or UUID

SYNOPSIS

       findfs NAME=value

DESCRIPTION

       findfs  will  search the block devices in the system looking for a filesystem or partition with specified tag. The currently supported tags
       are:

       LABEL=<label>
	      Specifies filesystem label.

       UUID=<uuid>
	      Specifies filesystem UUID.

       PARTUUID=<uuid>
	      Specifies partition UUID. This partition identifier is supported for example for GUID  Partition	Table (GPT) partition tables.

       PARTLABEL=<label>
	      Specifies partition label (name). The partition labels are supported for example for GUID Partition Table  (GPT)	or  MAC  partition
	      tables.

       If the filesystem or partition is found, the device name will be printed on stdout.

       The complete overview about filesystems and partitions you can get for example by

	      lsblk --fs

	      partx --show <disk>

	      blkid

EXIT STATUS

	      0      success
	      1      label or uuid cannot be found
	      2      usage error, wrong number of arguments or unknown option

AUTHOR

       findfs was originally written by Theodore Ts'o <tytso@mit.edu> and re-written for the util-linux package by Karel Zak <kzak@redhat.com>.

ENVIRONMENT

       LIBBLKID_DEBUG=all
	      enables libblkid debug output.

SEE ALSO

       blkid(8), lsblk(8), partx(8)

AVAILABILITY

       The  findfs  command  is  part of the util-linux package and is available from Linux Kernel Archive <https://www.kernel.org/pub/linux/utils
       /util-linux/>.

util-linux							    March 2014								 FINDFS(8)