sppptun(1M)						  System Administration Commands					       sppptun(1M)

NAME

       sppptun - PPP tunneling driver utility

SYNOPSIS

       sppptun plumb

       sppptun plumb protocol device

       sppptun unplumb interface

       sppptun query

DESCRIPTION

       The  sppptun utility is used to configure and query the Solaris PPP tunneling device driver, /dev/sppptun.  Currently, only PPP over Ether-
       net (PPPoE) is supported, so the plumb and unplumb arguments are used to specify Ethernet interfaces that are to be used for PPPoE, and the
       query option lists the plumbed interfaces.

       The  use  of  sppptun  to  add interfaces is similar to the use of ifconfig(1M) to add interfaces to IP. The plumbing is done once for each
       interface, preferably at system start-up time, and is not normally manipulated on a running system. If multiple instances of  PPP  are  run
       over a single interface, they share the plumbing to that interface. Plumbing for each session is not required (and not possible for PPPoE).

       The proper way to plumb interfaces for PPPoE is to list the interfaces, one per line, in the /etc/ppp/pppoe.if file.

USAGE

       sppptun plumb

	   When  specified  with  no additional arguments, the plumb argument lists the protocols that are supported by the utility. These are the
	   strings that are used as the protocol argument below.

       sppptun plumb protocol device

	   This plumbs a new interface into the driver. The protocol parameter is pppoe for the PPP-carrying "Session Stage" connection or  pppoed
	   for	the PPPoE "Discovery Stage" connection. Both connections must be present for each Ethernet interface that is to be used for PPPoE.
	   The device parameter is the path name of the Ethernet interface to use (use ifconfig(1M) to list available devices). If the path begins
	   with /dev/, then this portion may be omitted.

       sppptun unplumb interface

	   This removes an existing interface from the driver and terminates any PPP sessions that were using the interface. The interface parame-
	   ter is the name of the interface as reported when the interface was plumbed.

       sppptun query

	   Displays the canonical names of all interfaces plumbed into the /dev/sppptun device driver.

EXAMPLES

       Example 1 Setting up to Use PPPoE on hme0

       Plumb the hme0 interface.

	 # sppptun plumb pppoed hme0
	 hme0:pppoed
	 # sppptun plumb pppoe hme0
	 hme0:pppoe

       Remove the hme0 interface.

	 # sppptun unplumb hme0:pppoed
	 # sppptun unplumb hme0:pppoe

       Example 2 Script to Remove All Plumbed Interfaces

	 #!/bin/sh
	 for intf in `sppptun query`
	 do
		 sppptun unplumb $intf
	 done

EXIT STATUS

       The following exit values are returned:

       0     Successful completion.

       1     One or more errors occurred.

FILES

       /etc/ppp/pppoe.if    list of Ethernet interfaces to be plumbed at boot time

       /usr/sbin/sppptun    executable command

       /dev/sppptun	    Solaris PPP tunneling device driver

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWpppdt 		   |
       +-----------------------------+-----------------------------+

SEE ALSO

       pppd(1M), pppoec(1M), pppoed(1M), sppptun(7M)

       RFC 2516, Method for Transmitting PPP Over Ethernet (PPPoE), Mamakos et al, February 1999

SunOS 5.11							    19 Mar 2001 						       sppptun(1M)