Boot process hangs after reaching the following line:
Using knoppix 6.2 as LiveCD, and mounting the partitions, I got the following:
Is there any problem in fstab?
Please help me. I could not reinstall the server.
OS: Ubuntu Server 10.04 64bit
Machine: HP DL380
During the boot-up process *nix runs scripts linked into the runlevel directories rc#.d. What I'm wondering is, how do I control the environment that those scripts see? I need to set a couple environment variables, and I can NOT do it from within the scripts because it poses a maintenance nightmare... (1 Reply)
I've got an RS6K B50, and i've installed AIX 5.3, TL5. It installs fine, the only customisations i make to the BOS are to change the locale / keyboard layout to UK, and to choose not to install graphical software.
I have no video card in this box, and i connect via a serial console (null modem... (4 Replies)
Hi all,
I have a SUN server Sun-Fire-V890 running solaris 9, with a remote system console .
Both the IP adresses of the server and the console are in a private network (address 10.67.xxx).
For some reasons I need to give the access to the server from outside address 194.xxx, but I prefer that... (2 Replies)
Hi guys,
Got a tiny bit of a problem on one of our servers here at work. I installed AIX 5.3 on the server and that went fine. Then I upgraded to ML 5300-05-01, but now the system just hangs on boot.
The system starts up and the monitor comes on in few minutes, but a few seconds later when... (6 Replies)
How to add the Swap space... i know this procedure but it doesn/t work.
swap -l to see the swap space (swap -s)
Creak swap file
mkdir 100m swap.file
add the swap file
swap -a swap.file...
but it not work ..!! (9 Replies)
To All:
I have this AIX machine (see boot process below). The problem was it hangs at:
The ctrmc Subsystem has been started. Subsystem PID is 11906..
I checked with other forums but their advise were just "strong punches in the air" with no specific explanation.
I really appreciate if... (6 Replies)
Hey All,
Im using Fedora 2.6 (which is cannot be changed for compatibility reasons).
I cloned a drive from a different server and when i added this drive to a new box, during startup it hangs on "Configuring Kernel Parameters:"
Is there any way to bypass this process and still boot... (0 Replies)
Hi all,
We have a old Power4 server with AIX version 5.3 installed. Upon boot up, it hangs right after the AIX welcome screen. On the diagnostic load progress LED indicator, I saw that it stopped at '0c32' then after awhile the LED would be blank. The screen on the monitor will hang at the black... (15 Replies)
Hi Guys,
I have a SunBlade 1500 which I use to practice at home. Suddenly when I power on the server it just displays the solaris banner and Boot device: disk File and args: Then it stops and says " rebooting with command: boot"
It doesn't boot to the kernel. Is there anyway I can possibly... (5 Replies)
Power server up runs through diagnostics.
Goes to the boot section and then the bit where the cursor is spinning and thats it. Hangs completely.
Any ideas? (10 Replies)
Discussion started by: psychocandy
10 Replies
LEARN ABOUT HPUX
swapmem_on
swapmem_on(5) OBSOLETE swapmem_on(5)NAME
swapmem_on - OBSOLETE kernel tunable parameter
DESCRIPTION
The tunable is obsolete. Processes will always be allowed to use pseudo-swap space if it is available.
In previous versions of HP-UX, system configuration required sufficient physical swap space for the maximum possible number of processes on
the system. This is because HP-UX reserves swap space for a process when it is created, to ensure that a running process never needs to be
killed due to insufficient swap.
This was difficult, however, for systems needing gigabytes of swap space with gigabytes of physical memory, and those with workloads where
the entire load would always be in core. This tunable was created to allow system swap space to be less than core memory. To accomplish
this, a portion of physical memory is set aside as "pseudo-swap" space. While actual swap space is still available, processes still
reserve all the swap they will need at fork or execute time from the physical device or file system swap. Once this swap is completely
used, new processes do not reserve swap, and each page which would have been swapped to the physical device or file system is instead
locked in memory and counted as part of the pseudo-swap space.
WARNINGS
Installation of optional kernel software, from HP or other vendors, may cause changes to tunable parameter values. After installation,
some tunable parameters may no longer be at the default or recommended values. For information about the effects of installation on tun-
able values, consult the documentation for the kernel software being installed. For information about optional kernel software that was
factory installed on your system, see at
AUTHOR
was developed by HP.
Tunable Kernel Parameters swapmem_on(5)