Boot process hangs after reaching the following line:
Using knoppix 6.2 as LiveCD, and mounting the partitions, I got the following:
Is there any problem in fstab?
Please help me. I could not reinstall the server.
OS: Ubuntu Server 10.04 64bit
Machine: HP DL380
During the boot-up process *nix runs scripts linked into the runlevel directories rc#.d. What I'm wondering is, how do I control the environment that those scripts see? I need to set a couple environment variables, and I can NOT do it from within the scripts because it poses a maintenance nightmare... (1 Reply)
I've got an RS6K B50, and i've installed AIX 5.3, TL5. It installs fine, the only customisations i make to the BOS are to change the locale / keyboard layout to UK, and to choose not to install graphical software.
I have no video card in this box, and i connect via a serial console (null modem... (4 Replies)
Hi all,
I have a SUN server Sun-Fire-V890 running solaris 9, with a remote system console .
Both the IP adresses of the server and the console are in a private network (address 10.67.xxx).
For some reasons I need to give the access to the server from outside address 194.xxx, but I prefer that... (2 Replies)
Hi guys,
Got a tiny bit of a problem on one of our servers here at work. I installed AIX 5.3 on the server and that went fine. Then I upgraded to ML 5300-05-01, but now the system just hangs on boot.
The system starts up and the monitor comes on in few minutes, but a few seconds later when... (6 Replies)
How to add the Swap space... i know this procedure but it doesn/t work.
swap -l to see the swap space (swap -s)
Creak swap file
mkdir 100m swap.file
add the swap file
swap -a swap.file...
but it not work ..!! (9 Replies)
To All:
I have this AIX machine (see boot process below). The problem was it hangs at:
The ctrmc Subsystem has been started. Subsystem PID is 11906..
I checked with other forums but their advise were just "strong punches in the air" with no specific explanation.
I really appreciate if... (6 Replies)
Hey All,
Im using Fedora 2.6 (which is cannot be changed for compatibility reasons).
I cloned a drive from a different server and when i added this drive to a new box, during startup it hangs on "Configuring Kernel Parameters:"
Is there any way to bypass this process and still boot... (0 Replies)
Hi all,
We have a old Power4 server with AIX version 5.3 installed. Upon boot up, it hangs right after the AIX welcome screen. On the diagnostic load progress LED indicator, I saw that it stopped at '0c32' then after awhile the LED would be blank. The screen on the monitor will hang at the black... (15 Replies)
Hi Guys,
I have a SunBlade 1500 which I use to practice at home. Suddenly when I power on the server it just displays the solaris banner and Boot device: disk File and args: Then it stops and says " rebooting with command: boot"
It doesn't boot to the kernel. Is there anyway I can possibly... (5 Replies)
Power server up runs through diagnostics.
Goes to the boot section and then the bit where the cursor is spinning and thats it. Hangs completely.
Any ideas? (10 Replies)
Discussion started by: psychocandy
10 Replies
LEARN ABOUT HPUX
lvrmboot
lvrmboot(1M)lvrmboot(1M)NAME
lvrmboot - remove LVM logical volume link to root, primary swap, or dump volume
SYNOPSIS
autobackup] dump_lv] vg_name
Remarks
cannot be performed if the volume group is activated in shared mode.
DESCRIPTION
This command is supported for arguments belonging to volume groups version 1.0. Attempting this command with arguments belong to volume
groups version 2.0 or higher will result in an error.
The command updates all physical volumes contained in the volume group vg_name such that the logical volume is removed as a root, primary
swap, or dump volume when the system is next booted on the volume group.
Options and Arguments
recognizes the following options and arguments:
vg_name The path name of the volume group.
Set automatic backup for this invocation of this command.
autobackup can have one of the following values:
Automatically back up configuration changes made to the logical volume.
This is the default.
After this command executes, the command (see vgcfgbackup(1M)) is executed for the volume group to which
the logical volume belongs.
Do not back up configuration changes this time.
Remove the definition of
dump_lv as one of the dump volumes. Update the Boot Data Reserved Area.
This option will be obsolete in the next HP-UX release.
Remove the definitions of all of the root, primary swap,
and all dump volumes from the given volume group. Update the Boot Data Reserved Area.
Remove the definition of the primary swap volume
from the given volume group. Update the Boot Data Reserved Area.
This option will be obsolete in the next HP-UX release.
Print verbose messages.
EXTERNAL INFLUENCES
Environment Variables
determines the language in which messages are displayed.
If is not specified or is null, it defaults to "C" (see lang(5)).
If any internationalization variable contains an invalid setting, all internationalization variables default to "C" (see environ(5)).
EXAMPLES
Specify that the logical volume should be removed as one of the dump logical volumes:
Specify that volume group should no longer be a root volume group. Primary swap and dump are also removed.
SEE ALSO lvlnboot(1M), lvmadm(1M).
lvrmboot(1M)