Sponsored Content
Full Discussion: Are my disks mirrored ?
Operating Systems Solaris Are my disks mirrored ? Post 302458199 by Exposure on Thursday 30th of September 2010 03:46:00 AM
Old 09-30-2010
Are my disks mirrored ?

# metastat
d1: Mirror
Submirror 0: d11
State: Okay
Submirror 1: d12
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 14582208 blocks (7.0 GB)

d11: Submirror of d1
State: Okay
Size: 14582208 blocks (7.0 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s0 0 No Okay Yes


d12: Submirror of d1
State: Okay
Size: 14582208 blocks (7.0 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s0 0 No Okay Yes


Device Relocation Information:
Device Reloc Device ID
c1t1d0 Yes id1,sd@SSEAGATE_ST373307LSUN72G_3HZ9S3ZR00007523712A
c1t0d0 Yes id1,sd@SSEAGATE_ST373307LSUN72G_3HZ9QGFJ00007523GSX1
#

# df -k
Filesystem kbytes used avail capacity Mounted on
/dev/md/dsk/d1 7180493 4446852 2661837 63% /
/proc 0 0 0 0% /proc
mnttab 0 0 0 0% /etc/mnttab
fd 0 0 0 0% /dev/fd
/dev/dsk/c1t1d0s1 10327372 4253481 5970618 42% /var
swap 18954952 32 18954920 1% /var/run
swap 18955264 344 18954920 1% /tmp
/dev/dsk/c1t1d0s3 51639999 47977453 3146147 94% /data
/dev/dsk/c1t0d0s3 10327372 3355213 6868886 33% /opt
/dev/dsk/c1t0d0s4 33048453 26660522 6057447 82% /oracle
/dev/dsk/c1t2d0s0 69194458 63779623 4722891 94% /data/ext1
/dev/dsk/c1t3d0s0 69194458 61828249 6674265 91% /data/ext2

Last edited by Exposure; 09-30-2010 at 05:26 AM..
 

10 More Discussions You Might Find Interesting

1. AIX

checking to see if logical disks are mirrored.

I have AIX 5.1 I ran these commands and was not able to see what disk were mirrored to what. I thought this is what I should do? lslv -m rd |more lslv -m db |more I get a error stating that it can't find or in the device configuation databse. Is there another way to look? I have a physcal... (1 Reply)
Discussion started by: rocker40
1 Replies

2. AIX

Mirrored disk.....

How do I know, which all disks are mirrored? any command? Bala (7 Replies)
Discussion started by: balaji_prk
7 Replies

3. Solaris

Creating an image of a mirrored disks

Hi guys, I havent done this before but iam trying to create an image of a mirrorred drive. Correct me if iam wrong, but when i have two disks setup in raid configuration and have them mirrored in solaris. It then defines at one entity. How would i create a "flar" image of that one entity... (3 Replies)
Discussion started by: tlee
3 Replies

4. HP-UX

MirrorDisk UX: Should DUMP Be Mirrored?

Follwing up on what I was working on yesterday, I noticed that at this thread, someone was suggesting that you WOULDN'T want to mirror DUMP. When I boot with my current secondary disk (because I didn't mirror DUMP) I get an error indicating that DUMP isn't there. Why wouldn't I want to mirror... (1 Reply)
Discussion started by: deckard
1 Replies

5. Solaris

Backup for HW Mirrored Disks

We use SW mirroring (RAID1) using SVM for our SUN servers (which we OEM to end clients with our application on). When I need to make a tape backup for the server (disk), I disable mirroring and perform backup of the entire disk to tape using ufsdump. This process requires an outage and sensitive as... (8 Replies)
Discussion started by: StarSol
8 Replies

6. UNIX for Advanced & Expert Users

how to create multiple-boot system with disks mirrored(RAID1+0) and disk alone

I have a HP proliant ML 570 G3 with two 146GB disk drives mirrored(RAID1+0) windows server 2003 was installed on that disk. I will add a disk.(scsi 300GB) I will install Linux on that additional disk. I want to create multiple-boot system. Is it possible? I wanna know how to create... (0 Replies)
Discussion started by: lifegeek
0 Replies

7. HP-UX

[Solved] How to determine that you have 2 disks mirrored ?

hi every body i want to know which command tell me more detailes to know the 2 disks mirrored or not ? in group like vg00 (5 Replies)
Discussion started by: maxim42
5 Replies

8. HP-UX

To identify if local disks are mirrored

Hello All, Am trynig to identify if the local HD's on our BL860 (running 11v3) are indeed mirrored to each other. Cheers, Cameron (3 Replies)
Discussion started by: Cameron
3 Replies

9. AIX

rootvg mirrored

I want to increase the size of /tmp by 1GB I know that the command is chfs -a size=+1G /tmp But the rootvg is mirrored and when I do a lsvg -p rootvg, I could see 2 disks. Will there be any impact if I increase the size of /tmp when the rootvg is mirrored ? Please advise. (1 Reply)
Discussion started by: newtoaixos
1 Replies

10. AIX

How to extend mirrored VG?

Hi all, I need to extend a lv, but unfortunately I do not have enough space on my mirrored Volume group. I've planned to add 2 more disks to this vg (for mirroring) But ... what's the next steps to extend my lv using these 2 disks with a valid mirroring ? 1. extendvg myvg disk1 disk2... (3 Replies)
Discussion started by: unclefab
3 Replies
All times are GMT -4. The time now is 06:22 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy