|
|
Sponsored Content
Operating Systems
Solaris
Changing back the OBP from the RSC
Post 302458170 by Robinthehood on Thursday 30th of September 2010 01:57:50 AM
09-30-2010
Hi again Kumarmani,
thanks again for your suggestions, have tryed all that you told me without success. Tryed resetting via setenv and eepromm as well.
Here is printout of eeprom, prehaps you could check it and see if you can see anything that maybe stopping me from resetting back to ok prompt.
It reads as follows;
output-device=rsc-console
input-device=rsc-console
load-base=16384
auto-boot?=true
boot-command=boot
diag-file:data not available
diag-device=disk net
boot-file:data not available
boot-device=/pci@8,600000/SUNW,qlc@4...1/SUNW,gfe@3,1 devalias qfeo/pci@8,700000/pci@1/SUNW,qfe@o,1
security-mode=none
security-password:data not available
security-#badlogin=0
diag-out-console=true
#power-cycles=166
diag-script=none
diag-level=max
diag-switch=true
error-reset-recovery=boot
Tryed typing in setenv input-device keyboard and setenv output-device screen.
Typed in reset all and clicked on return and nothing happened.
Did this in eeproom terminal, is this correct?..
Cheers
Arjay
thanks again for your suggestions, have tryed all that you told me without success. Tryed resetting via setenv and eepromm as well.
Here is printout of eeprom, prehaps you could check it and see if you can see anything that maybe stopping me from resetting back to ok prompt.
It reads as follows;
output-device=rsc-console
input-device=rsc-console
load-base=16384
auto-boot?=true
boot-command=boot
diag-file:data not available
diag-device=disk net
boot-file:data not available
boot-device=/pci@8,600000/SUNW,qlc@4...1/SUNW,gfe@3,1 devalias qfeo/pci@8,700000/pci@1/SUNW,qfe@o,1
security-mode=none
security-password:data not available
security-#badlogin=0
diag-out-console=true
#power-cycles=166
diag-script=none
diag-level=max
diag-switch=true
error-reset-recovery=boot
Tryed typing in setenv input-device keyboard and setenv output-device screen.
Typed in reset all and clicked on return and nothing happened.
Did this in eeproom terminal, is this correct?..
Cheers
Arjay
|
|
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Has anyone had a message after attempting a telnet to an RSC server of:
"Console session already in use." I'm attempting to access this server to setup a user account, and I'm having some problems. Does anyone have an
idea or suggestion on how to proceed? (0 Replies)
Discussion started by: mr-synapse
0 Replies
2. Solaris
Hello, today i'm comment in /etc/vfstab fs /usr and my server load in SingleUser without anything commands :(
How i can enter to OBP from # ? or ILOM ?
I'm try CTRL+BREAK (F5) , CTRL+ALT+BREAK (F5) and #. but it's don't help me :(((( (5 Replies)
Discussion started by: jess_t03
5 Replies
3. Solaris
Hello experts...
In OBP(OK prompt)... How can i know whole command if i know part of a command?
Thanks in advance... (2 Replies)
Discussion started by: younus_syed
2 Replies
4. Solaris
Hi All,
Please send the configuration for RSC in solaris.
Thanks and Regards, (3 Replies)
Discussion started by: lbreddy
3 Replies
5. Solaris
Dear All,
Can any body help me how to configure the RSC in solaris9.
Thanks and Regards, (1 Reply)
Discussion started by: lbreddy
1 Replies
6. Solaris
Hi All
I have done a reboot for SUN Solaris 8 ( model SUNFIRE 280R)
but i havent got the OK prompt i only got the following:
RSC2 POST - Version 10-18-2000 0.7
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
... (3 Replies)
Discussion started by: alaa75
3 Replies
7. Solaris
Hi All, ;)
I have configured rsc hosted on Sun-Fire-V490.
But I am not able to telnet this machine
Packages installed :
#pkginfo -l | grep SUNWrsc
PKGINST: SUNWrsc
PKGINST: SUNWrscd
PKGINST: SUNWrscj
I rebooted system but still I' not able to take rsc.
I am not... (3 Replies)
Discussion started by: tuxian
3 Replies
8. Solaris
Does anyone know where to get these on Oracle's support site or elsewhere? (7 Replies)
Discussion started by: LittleLebowski
7 Replies
9. UNIX for Dummies Questions & Answers
Hi Gurus,
I am totally confused :wall: . I have some questions regarding OBP,EEPROMand NVRAM, BIOS.
What actually are these how do they function and interact on a Sparc based solaris system.
What is ok> ?
What is system Firmware ?
How does the system startup?
Trying to google... (8 Replies)
Discussion started by: rama krishna
8 Replies
10. Solaris
I have a disk failure in a V280, the support tech asked for explorer output and rsc information
sc>showsc
rsc>environment
rsc>loghistory
rsc>consolehistory
rsc>version -v
since RSC is not a secure connection, I am not comfortable with providing this information for a disk... (2 Replies)
Discussion started by: baumer11
2 Replies
LEARN ABOUT PLAN9
sysdef
sysdef(1M) System Administration Commands sysdef(1M) NAME
sysdef - output system definition SYNOPSIS
/usr/sbin/sysdef [-i] [-n namelist] /usr/sbin/sysdef [-h] [-d] [-i] [-D] DESCRIPTION
The sysdef utility outputs the current system definition in tabular form. It lists all hardware devices, as well as pseudo devices, system devices, loadable modules, and the values of selected kernel tunable parameters. It generates the output by analyzing the named bootable operating system file (namelist) and extracting the configuration information from it. The default system namelist is /dev/kmem. OPTIONS
-i Prints the configuration information from /dev/kmem. This is the default and only needs to be specified if the configura- tion information from both /dev/kmem and the system file specified with the "-n namelist" option is needed. -nnamelist Specifies a namelist other than the default (/dev/kmem). The namelist specified must be a valid bootable operating system. -h Prints the identifier of the current host in hexadecimal. This numeric value is unique across all Sun hosts. -d The output includes the configuration of system peripherals formatted as a device tree. -D For each system peripheral in the device tree, display the name of the device driver used to manage the peripheral. EXAMPLES
Example 1: Sample output format The following example displays the format of the sysdef -d output: example% sysdef -d Node 'SUNW,Ultra-5_10', unit #-1 Node 'packages', unit #-1 (no driver) Node 'terminal-emulator', unit #-1 (no driver) Node 'deblocker', unit #-1 (no driver) Node 'obp-tftp', unit #-1 (no driver) Node 'disk-label', unit #-1 (no driver) Node 'SUNW,builtin-drivers', unit #-1 (no driver) Node 'sun-keyboard', unit #-1 (no driver) Node 'ufs-file-system', unit #-1 (no driver) Node 'chosen', unit #-1 (no driver) Node 'openprom', unit #-1 (no driver) Node 'client-services', unit #-1 (no driver) Node 'options', unit #0 Node 'aliases', unit #-1 (no driver) Node 'memory', unit #-1 (no driver) Node 'virtual-memory', unit #-1 (no driver) Node 'pci', unit #0 Node 'pci', unit #0 Node 'ebus', unit #0 Node 'auxio', unit #-1 (no driver) Node 'power', unit #0 Node 'SUNW,pll', unit #-1 (no driver) Node 'se', unit #0 (no driver) Node 'su', unit #0 Node 'su', unit #1 Node 'ecpp', unit #-1 (no driver) Node 'fdthree', unit #0 Node 'eeprom', unit #-1 (no driver) Node 'flashprom', unit #-1 (no driver) Node 'SUNW,CS4231', unit #0 (no driver) Node 'network', unit #0 Node 'SUNW,m64B', unit #0 Node 'ide', unit #0 Node 'disk', unit #-1 (no driver) Node 'cdrom', unit #-1 (no driver) Node 'sd', unit #1 Node 'dad', unit #1 Node 'pci', unit #-1 (no driver) Node 'SUNW,UltraSPARC-IIi', unit #-1 (no driver) Node 'pseudo', unit #0 [output truncated] FILES
/dev/kmem default operating system image ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ SEE ALSO
hostid(1), prtconf(1M), nlist(3ELF), attributes(5) SunOS 5.10 4 Oct 2004 sysdef(1M)