Sponsored Content
Operating Systems Solaris MAC spoofing a virtual NIC on Solaris 5.0 Post 302457994 by Isharfoxat on Wednesday 29th of September 2010 09:33:45 AM
Old 09-29-2010
Power MAC spoofing a virtual NIC on Solaris 5.0

Hi everybody!

I'm facing a problem and I doubt about the solution (I'm not very familiar with old *NIXs).
An external network supplier (let's call them "telco") just installed new communication components that filters MAC addresses.

I have a Solaris 5 server, with 1 NIC (hte0) which is configured with 3 IP addresses, each on a virtual device: hte0, hte0:1 and hte0:2.

Telco's hardware needs 2 accesses to my Solaris server, with 2 different IPs AND different MAC.

As the server is vital for quite a lot of people, I can't allow it to shutdown and spend time installing a new NIC (besides, as the server is an old SUN, finding a network card will be hard and expensive).

What I guess could be an alternative would be

Code:
ifconfig hte0
ifconfig hte0:3 plumb
ifconfig hte0:3 10.2.1.253/24 up
ifconfig hte0:3 down
ifconfig hte0:3 hw ether ab:ba:12:34:56:78
ifconfig hte0:3 up

But I'm not sure the
Code:
ifconfig hte0:3 hw ether ab:ba:12:34:56:78

will be OK with such an old OS... (makes me feel old too, saying such a thing... ).
Hardware virtualization was not really developed, back then...

Has anyone had a similar problem?
As this server is vital (and I really mean that), I don't want to shut it down if it can be avoided!

PS: sorry for my weird formulations, English is not my mother-tongue and I hate automated translators...
 

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Changing MAC address of a NIC

All, I have a need to software change the MAC address of a NIC in a Sparc Ultra 10 - I believe there is a command that allows to do this at boot up? Is it a missing (to me) part of ifconfig ? If so, what is the syntax? All replies gratefully received ! Thanks Andrew (3 Replies)
Discussion started by: wretch
3 Replies

2. IP Networking

Binding Virtual IP address to NIC

Hi, I bound a virtual IP to a network card on my E450 server and I am getting this error when I reboot the server, saying, " retrying host, RPC time out. I had to break this sequence and allow other services to load. Of course they didn't load properly. Please how can I sort this out? I do need... (8 Replies)
Discussion started by: Ronny
8 Replies

3. Solaris

How to check Virtual NIC card speed on solaris

Hi, We have a 4 port Sun gigaswift NIC card on our sun fire server. If the card is a physical one I know how to check the settings/speed. But since this is a virtual card with 4 ports , I am not sure as how we can check the settings. Details ----------- root:/> ifconfig -a lo0:... (3 Replies)
Discussion started by: pray44u
3 Replies

4. HP-UX

how can I determine which NIC card is virtual NIC Card

how can I determine which NIC card is virtual NIC Card which condition can make a decision Does HP UX have Virtual Network Adapter Concept if ,it has where I can Find if I Install Virutal Network Adapter or which command that i can get it or which software can generate thanks (2 Replies)
Discussion started by: alert0919
2 Replies

5. Cybersecurity

MAC Address spoofing

There is a question in the SCO section asking for information on how to change the MAC address of a NIC. Is there a valid reason for wanting to change the MAC address? (1 Reply)
Discussion started by: jgt
1 Replies

6. Solaris

create Virtual NIC in Solaris 10

Hi All, does any body know how to create Virtual NIC in Solaris 10 if any one have good article or reference kindly provide me i try to Google but i didn't find good one (7 Replies)
Discussion started by: jamisux
7 Replies

7. OS X (Apple)

ethernet mac spoofing

I tried to use the command sudo ifconfig en0 ether xx:xx:xx:xx:xx:xx to do mac spoofing for internet connection in my office. It works only for 5 minutes. Every time after about 5mins, the Internet will be disconnected. :wall: Any one knows how to solve this problem? Thanks. (6 Replies)
Discussion started by: andrewust
6 Replies

8. Solaris

x86 Solaris 10 nic driver added but not attached. NIC is not detected.

I couldn't install my nic in solaris 10. I compiled and added the driver but failed to attach the driver and ifconfig output shows only loopback dev. Please see the following output and tell me whether my nic has been detected and why the driver failed to attach? My nic is detected in linux... (0 Replies)
Discussion started by: vectrum
0 Replies

9. Solaris

Change hostID of Solaris 10 virtual/guest machine installed by Virtual Box 4.1.12 on Windows-XP host

Trying to set or modify the randomly set hostID of a Solaris 10 virtual/guest machine that I installed on a Windows-XP host machine (using Virtual Box 4.1.12). I was able to set/modify the hostname of the Solaris 10 virtual/guest machine during installation as well as via the Virtual Box... (4 Replies)
Discussion started by: Matt_VB
4 Replies

10. Red Hat

creating virtual nic permenant

am try to create another network card as virtual eth0:1 but when i restart the server it want be appear i have to create it again what is the solution for this . (6 Replies)
Discussion started by: leganti
6 Replies
vni(7d) 							      Devices								   vni(7d)

NAME
vni - STREAMS virtual network interface driver DESCRIPTION
The vni pseudo device is a multi-threaded, loadable, clonable, STREAMS pseudo-device supporting the connectionless Data Link Provider Interface dlpi(7P) Style 2. Note that DLPI is intended to interact with IP, meaning that DLPI access to applications is not supported. (For example, snoop fails on the vni interface.) The vni device is a software-only interface and does not send or receive data. The device provides a DLPI upper interface that identifies itself to IP with a private media type. It can be configured via ifconfig(1M) and can have IP addresses assigned to it, making aliases pos- sible. The vni pseudo device is particularly useful in hosting an IP address when used in conjunction with the 'usesrc' ifconfig option (see ifconfig(1M) for examples). The logical instances of the device can also be used to host addresses as an alternative to hosting them over the loopback interface. Multicast is not supported on this device. More specifically, the following options return an error when used with an address specified on vni: IP_MULTICAST_IF, IP_ADD_MEMBERSHIP, IP_DROP_MEMBERSHIP, IPV6_MULTICAST_IF, IPV6_JOIN_GROUP, IPV6_LEAVE_GROUP. In addition, broadcast is not supported. Because there is no physical hardware configured below it, no traffic can be received through nor transmitted on a virtual interface. All packet transmission and reception is accomplished with existing physical interfaces and tunnels. Because applications that deal with packet transmission and reception (such as packet filters) cannot filter traffic on virtual interfaces, you cannot set up a packet filter on a virtual interface. Instead, you should configure the policy rules to apply to the physical interfaces and tunnels, and if necessary, use the virtual IP addresses themselves as part of the rule configuration. Also, note that the virtual interface cannot be part of an IP multi- pathing (IPMP) group. FILES
/dev/vni 64-bit ELF kernel driver SEE ALSO
ifconfig(1M), in.mpathd(1M), ip(7P), ip6(7P) SunOS 5.10 18 July 2004 vni(7d)
All times are GMT -4. The time now is 04:04 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy