dvd problem in T2000 Post: 302457449

9 More Discussions You Might Find Interesting

1. Solaris

DVD drive problem after upgrade to Solaris 10

After upgrading to solaris 10 (from sol 8) on a SUN Blade 1500, it seems that the dvd/cd-rom does not accept dvds nor cds in the dvd drive. After I insert a dvd/cd in the drive, the disk is simply ejected (!) Is it possible that the upgrade made the system not being able to recognize these...

2. Solaris

dvd problem

I have a dvd on sunfire v215. It cannot mount automatically when I insert a dvd, but can when I insert a cd. Can anyone help me on this?

3. Solaris

T2000 - devfsadm problem

Hi everyone, I am having a problem when running devfsadm. We have many T2000, but on one of them, that is connected to our SAN, devfsadm reports no new disks. If a reconfiguration reboot is done, the system reports the new disk. But only with a reboot. We have Solaris10 installed and Veritas...

4. Solaris

Netra T2000 /var/adm/messages problem

Hi, I have a netra t2000 running solaris 10. It is fully patched with the latest patch cluster and also patch 118833-36 and 126897-02. The SC sys_event level is set to 3. I am running a test to show hardware log status, e.g simulating a power supply failure.Hence I unplug one of te...

5. Solaris

SF T2000 prtdiag problem

Hi, a couple of T2000 servers did not show the component status and the output was too short. There was a patch that needed to be installed. I also updated to the latest recommended patch cluster and OBP patch. After reboot/restart of picl, it worked ok for a couple of weeks. Then suddenly it went...

6. Red Hat

Yum installation problem from DVD !

Friends , I want to install package using yum from DVD in RHEL 5 . Hence I just follow the below rules : 1) # mount /dev/hdc /cdrom/ mount: block device /dev/hdc is write-protected, mounting read-only 2) Edit the yum rhel-debuginfo.repo file like following way : # pwd...

7. Solaris

Auto boot problem on Sun T2000

Hi All I have a problem on T2000 server. bash-3.00# uname -a SunOS 5.10 aaa Generic_120011-14 sun4v sparc SUNW,Netra-T2000After the initial solaris installation server failed to boot: Rebooting with command: boot Boot device: disk:b File and args: The file just loaded does not appear...

8. Solaris

Raid problem on T2000

Hi all, First post so be gentile :) It's my first time installing Solaris on T2000 server. I have 2 72GB HD's on it. After configuring HW raid and running raidctl command I get this output: bash-3.00# raidctl -l c0t0d0 Volume Size Stripe Status Cache RAID ...

9. UNIX for Dummies Questions & Answers

Problem controlling devices (DVD)

Hi, I have a problem controlling devices on my iMac. The internal DVD is no longer working. Therefore I have bought a new external DVD, but some programs use the internal by default. Since iMac, runs UNIX beneath the Mac OS X, I hope to do some magic, by unmounting the internal DVD and put...

LEARN ABOUT DEBIAN

pxfw

pxfw(8) 							     pxfw 0.5								   pxfw(8)

NAME

       pxfw - Firmware flashing tool for Plextor CD/DVD devices

SYNOPSIS

       pxfw -l
       pxfw -d DEVICE [-if firmware.bin] [-u] [-f] [-v]
       pxfw -d DEVICE [-e] [-r] [-t] [-v]

DESCRIPTION

       pxfw is the linux firmware flasher for Plextor CD and DVD drives.  Remove any disks before flashing.

FEATURES

       You can flash the firmware of these drives:
       Plextor Premium, Premium-2, PX-712, PX-716, PX-755 and PX-760.

DEVICE

       can be an IDE, SCSI, SATA, USB or FireWire connected optical drive. Not all SATA controller support all Plextor features.

       Linux:
       /dev/hdX: IDE device
       /dev/scdX: Linux 2.4: SATA, SCSI, USB device, or IDE device via ide-scsi emulation
       /dev/srX: Linux 2.6: IDE device via new ATA layer, SCSI or USB device

       OpenBSD/NetBSD:
       /dev/rcdX

       FreeBSD:
       /dev/cd: SCSI device
       /dev/acd: ATA device

       MacOS X:
       /dev/disk:

       win32:
       C:,D:,E:, ... X:,Y:,Z:

OPTIONS

       -l   scan busses for all available CD and DVD devices

       -if  select inputfile. Specify the firmware binary file, which should
	    be written to DEVICE.

       -u   proceed update. When the firmware checksum test has succeeded,
	    write firmware to DEVICE.

       -f   force flashing. Even if DEVICE is not recognized, or firmware.
	    checksum has failed, firmware writing will be forced.
	    Handle with care.

       -e   read EEPROM from DEVICE.

       -r   reboot the device.

       -t   test which opcodes are supported by the device.

       -v   debug.

EXAMPLES

       pxfw -d /dev/hdc -if 755_1.07.bin -u
       writes firmware file 755_1.07.bin into Master Drive on Secondary IDE-Port.

       pxfw -d /dev/sr3 -e -oe file.foo
       reades EEPROM from device /dev/sr3 and writes it to file.foo.

       please report man page improvements to T.Maguin@web.de

Gennady ShultZ Kozlov						  02 April, 2009							   pxfw(8)