After upgrading to solaris 10 (from sol 8) on a SUN Blade 1500, it seems that the dvd/cd-rom does not accept dvds nor cds in the dvd drive.
After I insert a dvd/cd in the drive, the disk is simply ejected (!)
Is it possible that the upgrade made the system not being able to recognize these... (2 Replies)
Hi everyone,
I am having a problem when running devfsadm. We have many T2000, but on one of them, that is connected to our SAN, devfsadm reports no new disks. If a reconfiguration reboot is done, the system reports the new disk. But only with a reboot. We have Solaris10 installed and Veritas... (13 Replies)
Hi,
I have a netra t2000 running solaris 10. It is fully patched with the latest patch cluster and also patch 118833-36 and 126897-02. The SC sys_event level is set to 3.
I am running a test to show hardware log status, e.g simulating a power supply failure.Hence I unplug one of te... (3 Replies)
Hi, a couple of T2000 servers did not show the component status and the output was too short. There was a patch that needed to be installed. I also updated to the latest recommended patch cluster and OBP patch.
After reboot/restart of picl, it worked ok for a couple of weeks. Then suddenly it went... (12 Replies)
Friends ,
I want to install package using yum from DVD in RHEL 5 . Hence I just follow the below rules :
1)
# mount /dev/hdc /cdrom/
mount: block device /dev/hdc is write-protected, mounting read-only
2)
Edit the yum rhel-debuginfo.repo file like following way :
# pwd... (3 Replies)
Hi All
I have a problem on T2000 server.
bash-3.00# uname -a
SunOS 5.10 aaa Generic_120011-14 sun4v sparc SUNW,Netra-T2000After the initial solaris installation server failed to boot:
Rebooting with command: boot
Boot device: disk:b File and args:
The file just loaded does not appear... (1 Reply)
Hi all,
First post so be gentile :)
It's my first time installing Solaris on T2000 server.
I have 2 72GB HD's on it.
After configuring HW raid and running raidctl command I get this output:
bash-3.00# raidctl -l c0t0d0
Volume Size Stripe Status Cache RAID
... (2 Replies)
Hi,
I have a problem controlling devices on my iMac.
The internal DVD is no longer working. Therefore I have bought a new external DVD, but some programs use the internal by default.
Since iMac, runs UNIX beneath the Mac OS X, I hope to do some magic, by unmounting the internal DVD and put... (0 Replies)
Discussion started by: ASL123
0 Replies
LEARN ABOUT DEBIAN
bootchartd.conf
BOOTCHARTD.CONF(5) File Formats Manual BOOTCHARTD.CONF(5)NAME
bootchartd.conf - configuration file for bootchartd
SYNOPSIS
/etc/bootchartd.conf
DESCRIPTION
bootchartd.conf contains configuration options for the bootchartd logger. The available options:
TMPFS_SIZE
If the root file system is not writable at startup, bootchartd mounts a hidden temporary file system in /mnt to store its log files.
This options controls the size of this file system. default: 32m
SAMPLE_PERIOD
Sampling period, in seconds. default: 0.2
PROCESS_ACCOUNTING
Whether to utilize BSD process accounting for a more accurate process tree. Note that the kernel needs to be configured to include
CONFIG_BSD_PROCESS_ACCT_V3. accton(8) from the GNU accounting utilities is also required. default: no
BOOTLOG_DEST
Log file tarball destination. default: /var/log/bootchart.tgz
AUTO_RENDER
Whether to automatically generate the boot chart once the boot logger completes. The boot chart will be generated in AUTO_REN-
DER_DIR. default: no
AUTO_RENDER_FORMAT
Image format to use for the auto-generated boot chart (choose between png, svg and eps). default: png
AUTO_RENDER_DIR
Output directory for auto-generated boot charts. default: /var/log
SEE ALSO bootchartd(1),
AUTHOR
bootchart was written by Ziga Mahkovec <ziga.mahkovec@klika.si>.
This manual page was written by Jorg Sommer <joerg@alea.gnuu.de>, for the Debian project (but may be used by others).
2006-04-09 BOOTCHARTD.CONF(5)