Is it possible to change the color of text in a korn shell script Menu?
I can change the color of session text through my telnet client but I want to be able to change color text in the Korn shell menu to highlight certain items. (6 Replies)
I am attempting to create a shell script with the following capaciblities:
1. Listed options to choice from
2. Use to perform awk statements
3. Print a report with the awk results
My questions are
1. How do I select more than one file for option #5 and #6
2. How to I create an... (11 Replies)
Hi folks,
I have a dual-boot Ubuntu/Windows machine and I wanted to create a script to change the menu.lst file so it will change the default boot partition (this is so I can reload the machine remotely and allow it to boot to the Windows partition).
Today I have to sudo cp a template file I... (1 Reply)
Use and complete the template provided. The entire template must be completed. If you don't, your post may be deleted!
1. The problem statement, all variables and given/known data:
1) Write a Menu Driven Shell Script which accepts1 to 5 options and performs the following actions for... (1 Reply)
Hi,
I need to have a shell script for the below need.
1. Menu with one heading and 4 options.
2. the heading and 4 options are taken from a file.
File entry
======
Heading1|option1|option2|option3|option4|
Heading2|option1|option2|option3|option4|
3. the user entries must be captured in... (9 Replies)
I have tried searching the forum but i haven't found a solution for this.
I have a shell script that presents the users with menus. The menus branch out to sub menus. It is all hunky dory as long as i traverse forward. But if i am in a sub menu and return to the previous menu and choose any... (11 Replies)
I'm writing a shell script and have a problem with selection when I issue the command, is there a way to automatically choose a selection number one after a selection menue appear
Command
1-choice
2- choice
3-choice
Thanks
Sara (3 Replies)
Hi All,
I have written a shell script that show menu driven option.
My requirement is that in the menu driven option i want to select multiple choice.
i.e
if i want to select 1 or 1,2 or 1,2,3 or 2,3 etc ....
Can some one help me in that
My script.
while true; do
echo " "
... (8 Replies)
I have a menu option which will look as follows
Select a menu option
1.change password
2.login as root user
3.show system version
4.quit
Select> 1
please enter the new password: unix
reenter the new password: unix
press any key to enter
(then displays again the menu options to enter the... (4 Replies)
Hi Friends,
I have a menu based tool which requires input/option to proceed further. How to make a shell script ?
eg: menu looks like
Get_data.sh
to continue (y/n) :
Here I need to key in "y" to proceed.
I want to prepare a script which should consider option y. (5 Replies)
Discussion started by: suresh3566
5 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)
09-24-2010
