Sponsored Content
Full Discussion: Sun Cluster 3.1 failover
Operating Systems Solaris Sun Cluster 3.1 failover Post 302456215 by Mack1982 on Thursday 23rd of September 2010 02:57:24 PM
Old 09-23-2010
Actually, the /var/adm/messages file has some errors reported in it, but there is no info about failing over. I am assuming the log would say something like "server2 failed over".

I have asked the vendor to look into it and open a case with oracle.

Actually EMC rebooted on of our SPs. However, rebooting one SP just shifts all the LUNs on that SP to other SPs (Multipathing). It should have been transparent to the Cluster.
 

10 More Discussions You Might Find Interesting

1. High Performance Computing

sun Cluster resource group cant failover

I have rcently setup a 4 node cluster running sun cluster 3.2 and I have installed 4 zones on each node. when installing the zones I had to install the zone on all nodes the on the last node do a zlogin -C <zonename> this worked ok. theni I tried to siwitch the zone to node a thei work... (14 Replies)
Discussion started by: lesliek
14 Replies

2. HP-UX

ServiceGuard cluster & volume group failover

I have a 2-node ServiceGuard cluster. One of the cluster packages has a volume group assigned to it. When I fail the package over to the other node, the volume group does not come up automatically on the other node. I have to manually do a "vgchange -a y vgname" on the node before the package... (5 Replies)
Discussion started by: Wotan31
5 Replies

3. High Performance Computing

SUN Cluster Vs Veritas Cluster

Dear All, Can anyone explain about Pros and Cons of SUN and Veritas Cluster ? Any comparison chart is highly appreciated. Regards, RAA (4 Replies)
Discussion started by: RAA
4 Replies

4. High Performance Computing

Veritas Cluster Server Management Console IP Failover

I have just completed a first RTFM of "Veritas Cluster Server Management Console Implementation Guide" 5.1, with a view to assessing it to possibly make our working lives easier. Unfortunately, at my organisation, getting a test installation would be worse than pulling teeth, so I can't just go... (2 Replies)
Discussion started by: Beast Of Bodmin
2 Replies

5. Solaris

Sun cluster and Veritas cluster question.

Yesterday my customer told me to expect a vcs upgrade to happen in the future. He also plans to stop using HDS and move to EMC. Am thinking how to migrate to sun cluster setup instead. My plan as follows leave the existing vcs intact as a fallback plan. Then install and build suncluster on... (5 Replies)
Discussion started by: sparcguy
5 Replies

6. Gentoo

How to failover the cluster ?

How to failover the cluster ? GNU/Linux By which command, My Linux version 2008 x86_64 x86_64 x86_64 GNU/Linux What are the prerequisites we need to take while failover ? if any Regards (3 Replies)
Discussion started by: sidharthmellam
3 Replies

7. Solaris

Sun cluster 4.0 - zone cluster failover doubt

Hello experts - I am planning to install a Sun cluster 4.0 zone cluster fail-over. few basic doubts. (1) Where should i install the cluster s/w binaries ?. ( global zone or the container zone where i am planning to install the zone fail-over) (2) Or should i perform the installation on... (0 Replies)
Discussion started by: NVA
0 Replies

8. Solaris

Solaris Cluster Failover based on scan rate

Dear Experts, If there is a possible Solaris Cluster failover to second node based on scan rate? I need the documentation If solaris cluster can do this. Thank You in Advance Edy (3 Replies)
Discussion started by: edydsuranta
3 Replies

9. Red Hat

Linux Cluster failover issue

Hi Guys, I am not much aware of clusters but i have few questions can someone provide the overview as it would be very helpful for me. How can i perform cluster failover test to see all the services are failing back to other node ? If it is using veritas cluster then what kind of... (2 Replies)
Discussion started by: munna529
2 Replies

10. Solaris

Can we add Oracle ASM in sun cluster3.3 or 4.0 in failover mode

Hi I am new to this forum & oracle DBA also, I would like to know that can we add Oracle ASM in failover mode in sun cluster 3.3 or 4.0 means that if suppose oracle is running along with ASM on node1 & this node went down due to hardware issue then both oracle along with ASM must move to... (1 Reply)
Discussion started by: hb00
1 Replies
strerr(8)						      System Manager's Manual							 strerr(8)

NAME
strerr - Receives error messages from the STREAMS log driver SYNOPSIS
/usr/sbin/strerr [-a sys_admin_mail_name] [-d logdir] PARAMETERS
Specifies the mail name of the user to receive the message via mail. This is the system administrator by default. Specifies the directory to contain the error log file. This is /var/adm/streams by default. DESCRIPTION
The strerr daemon receives error messages from the STREAMS log driver (strlog) for addition to the STREAMS error log files (error.mm.dd) in the STREAMS error logger directory (/var/adm/streams by default). When first called, the strerr daemon creates the log file error.mm.dd. This is a daily log file, where mm indicates the month and dd indicates the day of the logged messages. The strerr daemon then appends each error message that it subsequently receives from the STREAMS log driver to the log file. STREAMS error log messages have the following format: seq_num std_time ticks_time flags mod_ID sub_ID msg_text where: The error sequence number. The time the message was sent, in the format hh:mm:ss. The time the message was sent, measured in machine ticks since the last boot. Can be any of the following indicators: Indicates that the message has also been saved in the process's trace log. Indi- cates that the message signaled a fatal error. Indicates that the message is to be sent to the system administrator or specified user via mail. The module identification number of the trace message source. The subidentification number of the trace message source. The trace message text. The strerr daemon will run continuously until terminated by the user. FILES
The error log file or files on which strerr operates. NOTES
Only one strerr process can open the STREAMS log driver at a time. This restriction is intended to maximize performance. The STREAMS error logging mechanism works best when it is not overused. The strerr daemon can degrade STREAMS performance by affecting the response, throughput, and other behaviors of the drivers and modules that invoke it. The daemon will also fail to capture messages if drivers and modules generate messages at a higher rate than its optimum read rate. Missing sequence numbers among the messages in a log file indicate that messages have been lost. RELATED INFORMATION
Interfaces: strlog(7). delim off strerr(8)
All times are GMT -4. The time now is 02:38 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy