I am trying to restore Unixware 7.1 from a backup using RestoreEdge which is from Microline version 2. The restore is on another machine using the same RAID controller and TBU. We are retiring the other machine.
Anyway, we get to disk #2 and it panics. Here is the Pic.
Can anyone tell me what in this means? I am a complete noob with UNIX.
Hi all,
I am running 7.3 Redhat Linux, I have Oracle database running on it and I have some problem with the memory. every time I startup the database, the memory was peak up to 630M of Ram out 640M ram on the entire box and I didn't specify that much of memory on my database. Oracle advise me... (2 Replies)
Received the following on the weekend.
Panic:k_trap kernel mode trap type 0X0000000e cannot dump 163739 pages to dumpdev hd (1/41):space for only 48640 pages
Dump not complete
Safe to power off or press any key to reboot
Any ideas how to fix this one? It also happen a month ago. (3 Replies)
Hello!
Does anyone know howto reload your kernal without rebooting the machine?
I´ve updated the "/etc/security/limits.conf " file and need to make this active without rebooting the machine. this is Red Hat Advanced Server 2.1AS
Regards...
dOzY (3 Replies)
Hi,
Last week, we experienced 2 KERNEL PANIC error on our SCO Unix 5.0.7 server within a 2 hour span. So I called our sofware support which is OGC using running on an Informix Database. Within 5 minutes I had as answer that the problem was an Hardware issue. Since the server is supported by... (4 Replies)
Hi all,
I am new to redhat/fedora linux.
In fedora linux 6,we created one file system(hda3 - /fs).
in this mount poing we were installed mounta vista os.
while booting we are getting below error messages.
1)
Booting 'mountaVisat(2.6.18_pro 500_pc_target-x86_586 smp)'
root(hd0,1)... (2 Replies)
:) Firstly Hi all!!, im NEW!! and on here hoping that someone might be able to offer me some help... i have a server that keeps crashing every few days with the error message:
PANIC KERNAL-MODE ADDRESS FAULT ON USER ADDRESS 0X14
KERNAL PAGE FAULT FROM (CS:EIP)=(100:EF71B5BD)
EAX=EF822000... (10 Replies)
hi,
can anybody tell me how to increase the parameters like project.max-shm-ids on solaris10.
i have used prctl, but got reset while server reboot.
thnks and regards
Ajay (1 Reply)
Hi,
Can you please let me know about kernal parameters?
Where we can see that kernal parameters?
we are using System = SunOS 5.10.
Please let me know commands to see these kernal parameters file or files. (1 Reply)
HI All,
server stopped here, we are suspecting server crash, need install new OS.
Any suggestions on this. kindly help to us.
Thanks
Rajesh (0 Replies)
Discussion started by: Rajesh_Apple
0 Replies
LEARN ABOUT SUNOS
raidctl
raidctl(1M) System Administration Commands raidctl(1M)NAME
raidctl - RAID hardware utility
SYNOPSIS
raidctl -c disk1 disk2
raidctl -d disk1
raidctl [-f] -F filename controller...
raidctl -l [controller...]
DESCRIPTION
The raidctl utility creates, deletes, or displays RAID volumes of the LSI1030 HW Raid controllers that include RAID support. The utility
also updates firmware/fcode/BIOS for both RAID and non-RAID controllers.
The raidctl utility requires privileges that are controlled by the underlying file-system permissions. Only privileged users can manipulate
the RAID system configuration. If a non-privileged user attempts to create or delete a RAID volume, the command fails with EPERM.
Without options, raidctl displays the current RAID configuration on all exisiting controllers.
OPTIONS
The following options are supported:
-c disk1 disk2 (for on board)
Create a mirror using disk1 and disk2. Replace the contents of disk2 with the contents of disk1. Specify disk1 and disk2 in canonical
form, for example, c0t0d0.
When you create a a RAID volume, the RAID volume assumes the identity of the first target in the disk pair (disk1). The second target
(disk2) disappears from the system. Therefore, the RAID volume appears as one disk.
To have a successful RAID creation, there must not already be a RAID configuration present on the specified controller. Additionally,
the secondary disk must not be mounted, as it has all its data erased and replaced with the primary disk's data.
-d disk1 (for on board)
Delete the RAID volume specified as disk1.
Specify disk1 in canonical form, for example, c0t0d0.
-f (for HBA)
Force an update. Do not prompt.
-F filename controller (for HBA)
Update the firmware running on the specified controller (controller).
-l [controller ...] (for on board)
List the system's RAID configuration. If controller is specified, list RAID configurations for controller.
Output from the -l lists the following information:
RAID Volume Displays logical RAID volume name.
RAID Status Displays RAID status as either RESYNCING (disks are syncing), DEGRADED RAID is operating with reduced functionality),
OK (operating optimally), or FAILED (non-functional).
RAID Disk Displays RAID disk name.
Disk Status Displays disk status as either OK or FAILED.
EXAMPLES
Example 1: Creating the RAID Configuration
The following command creates the RAID configuration:
# raidctl -c c0t0d0 c0t1d0
RAID Volume 'c0t0d0' created
Example 2: Displaying the RAID Configuration
The following command displays the RAID configuration:
# raidctl
RAID RAID RAID Disk
Volume Status Disk Status
----------------------------------------
c0t0d0 RESYNCING c0t0d0 OK
c0t1d0 OK
Example 3: Deleting the RAID Configuration
The following command deletes the RAID configuration:
# raidctl -d c0t0d0
RAID Volume 'c0t0d0' deleted
Example 4: Updating Flash Images on the Controller
The following command updates flash images on the controller:
# raidctl -F lsi1030.fw 0
Update flash image on controller 0? (y/N): y
Flash updated successfully
EXIT STATUS
The following exit values are returned:
0 Successful completion.
1 Invalid command line input.
2 Request operation failed.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO attributes(5)
System Administration Guide: Basic Administration
SunOS 5.10 17 Aug 2004 raidctl(1M)