Sponsored Content
Operating Systems SCO Noob needs help with Sco Unixware 7.1 Post 302453511 by jgt on Wednesday 15th of September 2010 01:50:50 PM
Old 09-15-2010
If there are standard PS2 keyboard and mouse ports, I would try that first.
Second, do a fresh install of Unixware (practice run) to see if there will be any problems.
If the disk controller in the old machine is not the same as the disk controller in the new machine, you may have a problem with the emergency boot diskettes. I have never tried this with Unixware, only Open Server. It may be neccessary to do a fresh install, install microlite, and just restore the non root file systems.
 

8 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

SCO Unixware 2.1

I am using SCO Unixware 2.1 & some PC clients are connected, suddenly one message appearslike : UX:strintercept error: dropping message this message starts coming repeatedly & agtre some time system hangs.I had to reset the system & now the problem is not there.Please suggest, why this is... (0 Replies)
Discussion started by: paprch
0 Replies

2. UNIX for Dummies Questions & Answers

SCO Unixware 7 download

According to this thread: https://www.unix.com/showthread.php?t=1 one guy says However, I cannot find any sco unixware7 iso download link in their download section (http://wdb1.sco.com/clbk_web/owa/dwn_customer), is it really for free, and if that is true, where can I download it? Thanks, (2 Replies)
Discussion started by: phalcos
2 Replies

3. SCO

Samba 3.0.24 in SCO UnixWare 7.1.4

Please help me in troubleshooting my problem in Samba? I tried to instal Samba 3.0.24 in our SCO UnixWare 7.1.4 but after installing the nmbd daemon is not running. When i check the syslog from /var/adm, the following error appears: Sep 30 13:04:22 unixeei nmbd: bind failed on port 137... (0 Replies)
Discussion started by: eric_hing
0 Replies

4. SCO

sco unixware + oracle 8.0.5

hi, anybody can give procedure for how to install oracle 8.0.5 in sco unixware 7.1.4. (0 Replies)
Discussion started by: prakrithi
0 Replies

5. SCO

SCO noob please help

hello, sco openserver R5 the following error and it fails to load. init: Command is respawning too rapidily id: vm "/home/bin/stvm.sh" init: Comand..etc id: c02"/etc/start/autostart" its trying to mount car diagnostic program in vmware, the program location is in "start" i think? i... (1 Reply)
Discussion started by: hgibbs8129
1 Replies

6. SCO

SCO Unixware 7.1.1 Install - Need help

(sorry my English, is really poor). I have a SCO Unixware 7.1.1 and I need install in ML350 G3. Reading in google and HP web, make a floppy disks for install, but the options that I have is for network or floppy disk. How install from CD with patch for HP smart array 532 ?? or How... (5 Replies)
Discussion started by: xplertor
5 Replies

7. SCO

My UnixWare SCO Server

Hi, I'm new to this Unix world and have taken over looking after the I.T side of things at work, which includes the internal ERP system which runs on a UNIX SCO platform. My initial worry is what state this is in as its been on site over 20 years. What would be the first things to check on... (13 Replies)
Discussion started by: Mick_Dundee
13 Replies

8. SCO

Need Help with installtion of SCO UNIXware 7.0.1

Hi, I need help to install SCO Unixware 7.0.1. Can any one help with any documentation or installation notes for SCO Unixware 7.0.1. Thank you (1 Reply)
Discussion started by: farhandalvi
1 Replies
installboot(1M) 														   installboot(1M)

NAME
installboot - install bootblocks in a disk partition SYNOPSIS
installboot bootblk raw-disk-device The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition. The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be found using the -i option of uname(1). The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead. bootblk The name of the bootblock code. raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read- able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive. Example 1: Installing UFS Boot Block To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use: example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk /dev/rdsk/c1t0d0s0 /usr/platform/platform-name/lib/fs/ufs directory where ufs boot objects reside. /platform/platform-name/ufsboot second level program to boot from a disk or CD See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5) WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device. 11 Apr 2005 installboot(1M)
All times are GMT -4. The time now is 05:26 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy