I've got it, done. Since ASM does not use any extension from OS, so the raw devices are raw, not ext, ufs or zfs. I made by editing /etc/sysconf/rawdevices as:
Thank you!
One more question: Why are default block size in Linux = 4096? I've installed RHEL 5 - 64bit?
---------- Post updated at 02:44 PM ---------- Previous update was at 01:15 PM ----------
No, you're right.
This is the test ASM on single disk, of course, Oracle recommend to use separated physical volumes (such as SCSI - sda/sdb ... RAID - c0tx ).
Because I've got only one hard disk - IDE controller, so that, I used to device it into many partitions, some parts was mount and format by mkfs.ext(x) -block ..., the other was not formatted, and pinned in /etc/rawdevices as raw.
I got a FAT partition mounted as /mnt, as I believed you only can mount partitions when they are formated, but when I want to copy a file to the /mnt partition I only get errors...should I format it or do I have to change settings?
I only can work through the "WebMin" (a GREAT TOOL!) cause I'm... (2 Replies)
hi,
1) is logical partition the same as physical partition except that one is physical and the other is logical?
2) then it must a one to one ratio? (3 Replies)
I've created a partition with GNU Parted, how do I mount the partition?
The manual information at http://www.gnu.org/software/parted/manual/parted.html is good, but I am sure about how I mount the partition afterwards.
Thanks,
--Todd (1 Reply)
I am seeking advice from experts in this forum. Please help me.
I have tow disks on Sun Sparc box. Disk one has been installed Solaris 9 system. The disk two has been partitioned as one disk with 140 GB on the partition /dev/dsk/c1t1d0s6. Right now, I want to modify it as two partitions. I have... (8 Replies)
hi friends
one week ago, i have installed fedoa 9 on my home pc.
i already have windows xp on that machine.
unfortunately my windows xp has corrupted.
again i want to install windows xp but it is not installing.
will i format my linux partition or some other option is there.
please help me... (0 Replies)
Gentleman,
Please move if I have chose the incorrect forum section. I am trying to move data that is not backed up from partition 1 to partition 2 on a SAN that has a GFS2 filesystem. Since the data is not backed up I am rsyncing this data and once verified I will delete from the source... (6 Replies)
hi all
while formatting hard disk i am getting following error.
Partition 1 ends at 266338338
It must be between 34 and 143374704.
label error: EFI Labels do not support overlapping partitions
Partition 8 overlaps partition 1.
Warning: error writing EFI.
Label failed.
I have formatted the... (2 Replies)
I tried in fedora 9 to format a partition with FAT32 or NTFS but failed
mkfs -t NTFS /dev/sdb3
mkfs -t FAT32 /dev/sdb3
In both the output says the the device isn't present.
the output is something like this:
mkfs.FAT32: no device present
mkfs.NTFS: no device present
I am able to format in... (2 Replies)
Hi Experts
I would like to know different between soft partition concept and hard partition concept on solaris.
Here is little explanation between soft partition concept and hard partition concept on solaris.
Soft Partition:
1TB total space available in storage in all mapped to the OS to... (2 Replies)
Hello All,
I have a Red Hat Linux 5.9 Server installed with one hard disk & 2 Partitions created on it as follows,
/boot - Linux Partition & another is
LVM - One VG & under that 5-6 Logical volumes(var,opt,home etc).
Here my requirement is to take out 1GB of space from LVM ( Any logical... (5 Replies)
Discussion started by: gr8_usk
5 Replies
LEARN ABOUT OPENDARWIN
partx
PARTX(8) System Administration PARTX(8)NAME
partx - tell the kernel about the presence and numbering of on-disk partitions
SYNOPSIS
partx [-a|-d|-P|-r|-s|-u] [-t type] [-n M:N] [-] disk
partx [-a|-d|-P|-r|-s|-u] [-t type] partition [disk]
DESCRIPTION
Given a device or disk-image, partx tries to parse the partition table and list its contents. It can also tell the kernel to add or remove
partitions from its bookkeeping.
The disk argument is optional when a partition argument is provided. To force scanning a partition as if it were a whole disk (for example
to list nested subpartitions), use the argument "-" (hyphen-minus). For example:
partx --show - /dev/sda3
This will see sda3 as a whole-disk rather than as a partition.
partx is not an fdisk program - adding and removing partitions does not change the disk, it just tells the kernel about the presence and
numbering of on-disk partitions.
OPTIONS -a, --add
Add the specified partitions, or read the disk and add all partitions.
-b, --bytes
Print the SIZE column in bytes rather than in human-readable format.
-d, --delete
Delete the specified partitions or all partitions.
-g, --noheadings
Do not print a header line with --show or --raw.
-l, --list
List the partitions. Note that all numbers are in 512-byte sectors. This output format is DEPRECATED in favour of --show. Do not
use it in newly written scripts.
-n, --nr M:N
Specify the range of partitions. For backward compatibility also the format M-N is supported. The range may contain negative num-
bers, for example --nr -1:-1 means the last partition, and --nr -2:-1 means the last two partitions. Supported range specifications
are:
M Specifies just one partition (e.g. --nr 3).
M: Specifies the lower limit only (e.g. --nr 2:).
:N Specifies the upper limit only (e.g. --nr :4).
M:N Specifies the lower and upper limits (e.g. --nr 2:4).
-o, --output list
Define the output columns to use for --show, --pairs and --raw output. If no output arrangement is specified, then a default set is
used. Use --help to get list of all supported columns. This option cannot be combined with the --add, --delete, --update or --list
options.
-P, --pairs
List the partitions using the KEY="value" format.
-r, --raw
List the partitions using the raw output format.
-s, --show
List the partitions. The output columns can be selected and rearranged with the --output option. All numbers (except SIZE) are in
512-byte sectors.
-t, --type type
Specify the partition table type.
--list-types
List supported partition types and exit.
-u, --update
Update the specified partitions.
-S, --sector-size size
Overwrite default sector size.
-v, --verbose
Verbose mode.
-V, --version
Display version information and exit.
-h, --help
Display help text and exit.
EXAMPLES
partx --show /dev/sdb3
partx --show --nr 3 /dev/sdb
partx --show /dev/sdb3 /dev/sdb
All three commands list partition 3 of /dev/sdb.
partx --show - /dev/sdb3
Lists all subpartitions on /dev/sdb3 (the device is used as whole-disk).
partx -o START -g --nr 5 /dev/sdb
Prints the start sector of partition 5 on /dev/sdb without header.
partx -o SECTORS,SIZE /dev/sda5 /dev/sda
Lists the length in sectors and human-readable size of partition 5 on /dev/sda.
partx --add --nr 3:5 /dev/sdd
Adds all available partitions from 3 to 5 (inclusive) on /dev/sdd.
partx -d --nr :-1 /dev/sdd
Removes the last partition on /dev/sdd.
SEE ALSO addpart(8), delpart(8), fdisk(8), parted(8), partprobe(8)AUTHORS
Davidlohr Bueso <dave@gnu.org>
Karel Zak <kzak@redhat.com>
The original version was written by Andries E. Brouwer <aeb@cwi.nl>.
ENVIRONMENT
LIBBLKID_DEBUG=all
enables libblkid debug output.
AVAILABILITY
The partx command is part of the util-linux package and is available from Linux Kernel Archive <https://www.kernel.org/pub/linux/utils
/util-linux/>.
util-linux December 2014 PARTX(8)