09-09-2010
Sounds like you've checked this already, but I've had E450s that wouln't power up because the case wasn't seated properly in the past, so maybe double check that or when you have the cover off check the switch itself to make sure it's not broken.
In 10+ years working on Sun hardware I never ran into any other situation like you describe where the fans won't even spin up if the power supplies themselves were working. Do you have a different E450 that you could swap power supplies with and see if that helps? I wonder if they are dead in some way that the green lights are still staying on but they are actually failed.
7 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Hi,
I'm facing problem in connecting a Raid A1000 to E250 and E450. ( Both machines with Solaris 2.6 OS and patched, with different
scsi-initiator-ids - 7 & 3 ).
BTW, I'm not using this setup to access raid data from both machines simultaneously. There is Veritas Cluster Server monitoring... (1 Reply)
Discussion started by: shibz
1 Replies
2. Filesystems, Disks and Memory
Does anyone know what steps I have to follow to move an A1000 between two E450's. Im running solaris 2.6 (1 Reply)
Discussion started by: MBGPS
1 Replies
3. Solaris
Hi,
I'm working with an E450 server and it has one network card configured with 2 local and internet IP addresses.
Presently, the local IP is set as the primary address while teh Internet IP is set as the secondary address. I wish to change this and make the local IP secondary and the... (2 Replies)
Discussion started by: Ronny
2 Replies
4. Solaris
Hi all,
We are getting CPU warning temeratures sometimes and our server is shutdown at 80 degree F. We notice our server room temperature at 18 degree celcius . Our we have already cleaned dust from grills near CPU Fan . CPU fans are working (moving) . It is our experience that CPU... (5 Replies)
Discussion started by: Hitesh Shah
5 Replies
5. Solaris
I wanted to configure a second NIC card on a different IP on my Sun E450 server.
Currently, I have hme0.
when I ran the command : ifconfig hme1 <ip address> netmask <subnet mask> broadcast + up
I got the following error message: ifconfig: SIOCGIFFLAGS: hme1: no such interface
Any idea... (3 Replies)
Discussion started by: Remi
3 Replies
6. UNIX for Dummies Questions & Answers
Hi
I had deleted important files from my company server :(
the server is HPUX
and i don't know how to undo rm command or how to restore the files ..
iam appreciate for any help
Thanx ... (5 Replies)
Discussion started by: Eisa
5 Replies
7. Solaris
I have installed a qlogic HBA card in an E450 Solaris 9 with all the SUNW packages and the latest EPROM version. Configuration reboot was done. An orange light flashes to the right of where the card plugs into the fiber cable after booting, and the following error apprears at the start of the boot... (9 Replies)
Discussion started by: floydm
9 Replies
LEARN ABOUT MOJAVE
ppmdither
ppmdither(1) General Commands Manual ppmdither(1)
NAME
ppmdither - ordered dither for color images
SYNOPSIS
ppmdither [-dim power] [-red shades] [-green shades] [-blue shades] [ppmfile]
DESCRIPTION
Reads a portable pixmap as input, and applies dithering to it to reduce the number of colors used down to the specified number of shades
for each primary. The default number of shades is red=5, green=9, blue=5, for a total of 225 colors. To convert the image to a binary rgb
format suitable for color printers, use -red 2 -green 2 -blue 2.
OPTIONS
-dim power The size of the dithering matrix. The dithering matrix is a square whose dimension is a power of 2. power is that power of
2. The default is 4, for a 16 by 16 matrix.
-red shades The number of red shades to be used, including black; minimum of 2.
-green shades The number of green shades to be used, including black; minimum of 2.
-blue shades The number of blue shades to be used, including black; minimum of 2.
SEE ALSO
pnmdepth(1), ppmquant(1), ppm(5)
AUTHOR
Copyright (C) 1991 by Christos Zoulas.
14 July 1991 ppmdither(1)