I have been tasked with archiving Oracle tables. The data is on raw devices, and possibly will span multiple logical volumes.
Has anyone ever had to do this? How did you accomplish it?
Any references to accomplish this would be greatly appreciated.
Thanks, (2 Replies)
I'm running solaris, with solstice disksuite.
With other systems, i run veritas volume manager.
My dba want to implement ASM with oracle 10g.
Is it possible to create volumes with disksuite for ASM.
Oracle want a volume name ex: vol1
My question is, what is the best STANDARD solution.
... (5 Replies)
Perhaps someone here has some experience with this.
machine os RHE 4 6
oracle 10g RAC
disk is SAN attached clariion.
I have presented new disks to the host, so the machine sees all needed LUNS. powermt shows them, they are labeled and i have fdisk'd them.
They are visible across all RAC... (5 Replies)
I have AIX 5.3 with oracle 10g ( test server). While trying to create RAW disk for Oracle ASM I have accidentally messed with rootvg (hdisk0 & hdisk1)
When I do
# lspv hdisk0
0516-066 : Physical volume is not a volume group member.
Check the physical volume name specified. ... (4 Replies)
I am novice to perl. Can someone guide me on the below query. We have an existing perl script which connects to database to check the disk group status which i wanted to retieve directly from ASM rather than database.
This is because, a cluster has more than 4 databases running and a check on... (0 Replies)
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /
... (0 Replies)
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /... (4 Replies)
I am novice to perl. Can someone guide me on the below query. We have an existing perl script which connects to database to check the disk group status which i wanted to retieve directly from ASM rather than database.
This is because, a cluster has more than 4 databases running and a check on... (1 Reply)
Hi
I am new to this forum & oracle DBA also, I would like to know that can we add Oracle ASM in failover mode in sun cluster 3.3 or 4.0 means that if suppose oracle is running along with ASM on node1 & this node went down due to hardware issue then both oracle along with ASM must move to... (1 Reply)
Hi Folks,
I've just built a Solaris 11.3 server with a number of LDOM's, all good and well and not any serious issues so far.
On our older Solaris 10 systems we ran Oracle 11g using ASM disks, these disks were the raw device meta disks and came in very nicely as "/dev/md/rdsk/dnn" all worked... (4 Replies)
Discussion started by: gull04
4 Replies
LEARN ABOUT LINUX
mkdevalloc
mkdevalloc(1M) System Administration Commands mkdevalloc(1M)NAME
mkdevalloc - Make device_allocate entries
SYNOPSIS
/usr/sbin/mkdevalloc
DESCRIPTION
The mkdevalloc command writes to standard out a set of device_allocate(4) entries describing the system's frame buffer, audio and removable
media devices.
The mkdevalloc command is used by the init.d(4) scripts to create or update the /etc/security/device_allocate file.
Entries are generated based on the device special files found in /dev. For the different categories of devices, the mkdevalloc command
checks for the following files under /dev:
audio /dev/audio, /dev/audioctl, /dev/sound/...
tape /dev/rst*, /dev/nrst*, /dev/rmt/...
floppy /dev/diskette, /dev/fd*, /dev/rdiskette, /dev/rfd*
removable disk /dev/sr*, /dev/nsr*, /dev/dsk/c0t?d0s?, /dev/rdsk/c0t?d0s?
frame buffer /dev/fb
All entries set the device-minimum and device-maximum fields to the hex representations of ADMIN_LOW and ADMIN_HIGH, respectively. The
device-authorization field is set to solaris.device.allocate, except for the framebuffer entry, where it is set to *. The device-name,
device-type and device-clean fields are set to the following values:
device-name device-type device-clean
audio audio audio audio_clean_wrapper
tape mag_tape_0,1,... st st_clean
floppy floppy_0,1,... fd disk_clean
removable disk cdrom_0,1,... sr disk_clean
frame buffer framebuffer fb /bin/true
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Obsolete |
+-----------------------------+-----------------------------+
SEE ALSO allocate(1), bsmconv(1M), attributes(5)NOTES
mkdevalloc might not be supported in a future release of the Solaris operating system.
SunOS 5.10 8 Oct 2003 mkdevalloc(1M)