ENUM 
IEEE80211_CHANN(9) 					Device registration					   ENUM IEEE80211_CHANN(9)

NAME

       enum_ieee80211_channel_flags - channel flags

SYNOPSIS

       enum ieee80211_channel_flags {
	 IEEE80211_CHAN_DISABLED,
	 IEEE80211_CHAN_PASSIVE_SCAN,
	 IEEE80211_CHAN_NO_IBSS,
	 IEEE80211_CHAN_RADAR,
	 IEEE80211_CHAN_NO_HT40PLUS,
	 IEEE80211_CHAN_NO_HT40MINUS,
	 IEEE80211_CHAN_NO_OFDM,
	 IEEE80211_CHAN_NO_80MHZ,
	 IEEE80211_CHAN_NO_160MHZ
       };

CONSTANTS

       IEEE80211_CHAN_DISABLED
	   This channel is disabled.

       IEEE80211_CHAN_PASSIVE_SCAN
	   Only passive scanning is permitted on this channel.

       IEEE80211_CHAN_NO_IBSS
	   IBSS is not allowed on this channel.

       IEEE80211_CHAN_RADAR
	   Radar detection is required on this channel.

       IEEE80211_CHAN_NO_HT40PLUS
	   extension channel above this channel is not permitted.

       IEEE80211_CHAN_NO_HT40MINUS
	   extension channel below this channel is not permitted.

       IEEE80211_CHAN_NO_OFDM
	   OFDM is not allowed on this channel.

       IEEE80211_CHAN_NO_80MHZ
	   If the driver supports 80 MHz on the band, this flag indicates that an 80 MHz channel cannot use this channel as the control or any of
	   the secondary channels. This may be due to the driver or due to regulatory bandwidth restrictions.

       IEEE80211_CHAN_NO_160MHZ
	   If the driver supports 160 MHz on the band, this flag indicates that an 160 MHz channel cannot use this channel as the control or any
	   of the secondary channels. This may be due to the driver or due to regulatory bandwidth restrictions.

DESCRIPTION

       Channel flags set by the regulatory control code.

AUTHOR

       Johannes Berg <johannes@sipsolutions.net>
	   Author.

COPYRIGHT

Kernel Hackers Manual 3.10					     June 2014						   ENUM IEEE80211_CHANN(9)