08-30-2010
Linux Tip: How to Configure PPP for dialup for a single machine?
I shall explain how to setup PPP on your Linux machine, so that you can connect to the Internet using an external modem and a Dialup connection. This article explains the setup for the superuser alone (Not normal users).My Setup :
-
- My external modem (56kbps) is connected to the Serial Port : ttyS1 (This is COM2 Port under Windows)
- My ISP (Internet Service Provider) servers send me the following strings for logging in whenever I connect to their servers,
“Login” & “Password“. These exact strings need to be known since they have to be entered in the scripts later on.Other ISP's may send strings such as “User” and “Pass” or something else. Please note down the strings that you receive when you connect to your ISP. If needed contact your ISP's helpdesk.
- Every ISP has generally 2 DNS entries. Actually one is enough but the other one is for backup. This differs for each ISP. For my ISP the DNS entries are ‘202.68.128.66′ and ‘202.68.128.67′.
You have find out your ISP's DNS addresses. My service provider is named powersurfer.net (This exact name is also required to be entered in one configuration file).
Procedure :
- Copy the 2 files ppp-on & ppp-off from the /usr/doc/ppp2.3.10/scripts (exact directory depends on the installation & distribution on your system) to the folder /usr/bin
You would have to execute these files whenever you want to connect and disconnect from the Internet once the setup is complete. Hence these scripts should have executable rights.
- Edit the ppp-on script that you have just copied and make the following changes
Change the telephone no. , username and password to your username, password and your ISP telephone no.
- Copy the file ppp-on-dialer file from the /usr/doc/ppp2.3.10/scripts to the folder/etc/ppp
Edit this file to make the following changes
- Change the connection strings to “ogin” and “assword” (These should be the strings that your ISP sends you when you connect to your ISP, excluding the first letters in both these strings)
- Change the timeout period (Start of dialing to establishing of final connection) to a sensible value depending on your experience. I have set it to 120 seconds which is substantially more than what is required.
- Add an extra line after the existing ATZ command. This is to mute the modem once the connection has been made. Else you will hear the signal transfer noises continuously as long as you are connected. (Atleast I heard the sound on mine)OKATM1\
- Towards the end of the script make a change as follows.. enter your modem port and max speed in the parameters to the chat script. For me it is as follows
/dev/ttyS1 115200
- Now edit the /etc/resolv.conf file to show the following
search powersurfer.net
nameserver 202.68.128.66
nameserver 202.68.128.67
These lines totally depend on your ISP, so please fill it accordingly.
- Now the last step is to edit the /etc/ppp/options file and add the following lines. These settings are used whenever a net connection is established on your machine. If you want to know the meaning of each line you can refer to the PPP-How To documentation. There is a sample script with a description for each of these values. I have only selected those values that would be necessary for a normal dial up Internet connection. These should suffice for most dialup users.-detach
/dev/ttyS1
lock
crtscts
defaultroute
asyncmap 0
mtu 1500Note : This article explains the settings that should be enough for you to connect to the Internet, through the superuser account. For accessing the Internet from user accounts, a few more settings are required. I shall explain those in another tutorial. Though I have heard of a few experiences where even a normal user types 'su' in a shell window and changes to the superuser mode (this is for home machines where you are both the superuser and the normal user). Once you changed to superuser mode, you might be able to execute ppp-on and ppp-off scripts. This hasn't really worked at my place, but I have heard quite a few people doing this. I prefer using kppp to do all the work for me.
9 More Discussions You Might Find Interesting
1. Solaris
I've installed sun solaris 9 and i need to know how can i enable TCP Keepalive to ping socket connections every 300 seconds?
Thanks,
Mohammed Amin (1 Reply)
Discussion started by: m_amin
1 Replies
2. Linux
Hi All,
I installed the Linux on VMWare. Now i want to configure the NFS.
is that possible to configure NFS ? because i am having only one Machine.
Please give me the details ASAP.
Thanks in advance...
Regards,
Sridhar. (3 Replies)
Discussion started by: sridhusha
3 Replies
3. Solaris
Hi Experts,
I am new for solaris, i am using Solaris10,can you anyone assist me how to configure IP in my machine.
Thanks (4 Replies)
Discussion started by: daya.pandit
4 Replies
4. Solaris
Hi Gurus,
For learning purpose, I have installed a single node cluster 3.2 on Solaris 10 for practice. Now I am welling to create two non-global zone and create them as a fail over. Will appreciate your help and assistance.
Thanks (3 Replies)
Discussion started by: newadmin
3 Replies
5. UNIX for Dummies Questions & Answers
Hi Gurus,
Good morning .
I have a railwire internet connection(dial up).I am able to access internet in windows xp .but in windows xp every time i restart my pc i have to manually right click the "railwire"icon and then click "connect, after this i am just getting connected to the internet. But... (4 Replies)
Discussion started by: sanjay.login
4 Replies
6. Linux
Please help me to find out the equivalent commands for the following solaris commands in Linux
1. ct
2. cu
3. tip
4. on
Your help will be appreciated.
Thanks in advance.
~Saravana (0 Replies)
Discussion started by: tsaravanan
0 Replies
7. Shell Programming and Scripting
I need a shell script to copy files frm a linux machine to a windows machine using SCP. The files keeps changing day-to-day. I have to copy the latest file to the windows machine frm the linux machine.
for example :In Linux, On July 20, the file name will be 20.txt and it should be copied to... (3 Replies)
Discussion started by: nithin6034
3 Replies
8. Linux
I' m playng a little retrocomputing.
I have setup a virtual machine with SCO unix(3.2v4.2) on qemu
The machine start, the novell2000 card(ne2k_pci,ne2k_isa) unfortunately not,probably driver issue.
So I try the slirp with this procedure
On SCO
netconfig
add chain..sl ..etc
On... (2 Replies)
Discussion started by: Linusolaradm1
2 Replies
9. UNIX for Advanced & Expert Users
Unix (and Linux) uses a process tree that gives a natural security, by simple inheritance of attributes.
The following ptree script shows it. It runs on all Linux flavors.
Mostly useful for debugging.
#!/bin/sh
# Solaris style ptree
&& exec /usr/bin/ptree "$@"
... (6 Replies)
Discussion started by: MadeInGermany
6 Replies