VIOS redundancy....basics... Post: 302447785

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Unix Imaging for Redundancy

I'm trying to come up with an "imaging" type solution (a.k.a. Norton Ghost, Imagecast) with standard unix utils. I'd like to just image one of our FreeBSD servers so I can use the hot swap HD's. If one fails, I could slide in an exact duplicate HD and the server would be back up. I've tried just...

2. UNIX for Advanced & Expert Users

Port Redundancy

Dears, I have server has two port's(Enet0,Enet1) what I want as follows: Make the two port's has same IP address where, if the port Enet0 became down automaticly Enet1 become up :confused: . Amen

3. UNIX for Advanced & Expert Users

network redundancy with software

Here we want to implement the network redundancy on UNIX with the software. The two network interface cards are configured on the UNIX node,once one card is down or unnormal,the other can take over. Those aplications that used the tcp ,udp,multicast protocol can also been switched at the same...

4. Shell Programming and Scripting

How to remove the redundancy messages in a file

Hi I have a file in which there are lot of redundancy messages.. Like suppose i have the messages like the following in my file.. 45123|1|784tryr|uirirr|wagras|swyuyau|| 45123|1|784tryr|uirirr|wagras|swyuyau|| I need to remove the extra (45123|1|784tryr|uirirr|wagras|swyuyau||) and need...

5. UNIX for Dummies Questions & Answers

email redundancy between two servers

We have had some email outages in the last few months and my boss is asking is it worth going with one of those email redundancy/filtering sites. The thing is, we have a backup server on a remote location, so I am pretty sure we can set something up with what we have already. At the moment...

6. AIX

VIO Redundancy

Hi Guys, I'm working on building a new 595 machine.. I'm try to achieve high availability for the VIO clients using 2 VIO servers, The ethernet part is satisfied using SEA failover, Now how do I achieve redundancy for the disks, its the servers internal disk attached to the scsi cards... ...

7. AIX

Can EtherChannel be a redundancy config?

I have one p5 server, no lpar, 2 physical network adapter, bundle as one EtherChannel. The two 2 physical network adapter connect to 2 network switches. How to make this as a redundancy config? Current is if one physical network adapter down, the seond one will go through the network. but if...

8. AIX

VIOS IP address - separate vlan for vios servers ?

Hello, Lets say for simplicity that I do not use any vlan config inside my server - one lpar group use hea physical port1, another group hea physical port2. Physical port1 configured as vlan1 on external switch, physical port2 as vlan2. What is the common practice - should I isolate my vios...

9. UNIX for Dummies Questions & Answers

awk to remove redundancy, with conditions

Hi Everyone, I've been using awk '!x++' to get rid of redundancy in a file, but it's getting rid of some extra lines I need (like the plus signs in the example below). So how would I go from this: @XYZ ABCD 345345 + @MNO EFGH 789789 + @XYZ ABCD 345345 + to:

LEARN ABOUT DEBIAN

buildd

BUILDD(1)							   Debian sbuild							 BUILDD(1)

NAME

       buildd - package autobuilder daemon

SYNOPSIS

       buildd

VERSION

       This  man  page	documents  the	packaged  version  of buildd.  This version is maintained by the buildd-tools project developers on Alioth
       (https://alioth.debian.org/projects/buildd-tools/).

DESCRIPTION

       buildd is a daemon used to automatically build Debian packages from source.  wanna-build is used to find and claim packages  for  building,
       while  sbuild is used to build the packages.  The helper programs buildd-mail, buildd-uploader and buildd-watcher are used to perform vari-
       ous housekeeping tasks to keep the system running.

FILES

       /etc/buildd/buildd.conf
	      Configuration, maintained by the system administrator.  This may be used to override the defaults.

       ~/.builddrc
	      User-specific configuration.

AUTHORS

       Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>.

       sbuild is based on debbuild, written by James Troup <james@nocrew.org> and has been modified by
       Ben Collins <bcollins@debian.org>,
       Ryan Murray <rmurray@debian.org>,
       Francesco Paolo Lovergine <frankie@debian.org>,
       Michael Banck <mbanck@debian.org>, and
       Roger Leigh <rleigh@debian.org>

COPYRIGHT

       Copyright (C) 1998-2000 Roman Hodek <roman@hodek.net>
       Copyright (C) 1998-1999 James Troup <troup@debian.org>
       Copyright (C) 2003-2006 Ryan Murray <rmurray@debian.org>
       Copyright (C) 2001-2003 Rick Younie <younie@debian.org>
       Copyright (C) 2003-2004 Francesco Paolo Lovergine <frankie@debian.org>
       Copyright (C) 2005      Michael Banck <mbanck@debian.org>
       Copyright (C) 2005-2008 Roger Leigh <rleigh@debian.org>

SEE ALSO

       buildd.conf(5), buildd-mail(1), buildd-uploader(1), buildd-watcher(1), buildd-mail(1), wanna-build(1), sbuild(1).

Version 0.63.2							    18 Aug 2012 							 BUILDD(1)