Different hostnames with reboot while lan cable, no lan cable Post: 302446887

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

cable modem to sparc

hi , i have sparc machine , i want to connect my le0 (ethernet interface) directly to cable modem , i have created a file resolv.conf,hosts, dhcp.le0,defaultrouter,nisswitch,hostname.le0. i dont know my cable companies <domain name> and <name server assigned to me> , also they even dont know how...

2. BSD

cable modem problem

hi I want to setup my cable modem under OpenBSD. I did not configure my network while installing the system. When I type, I get # ifconfig -a lo0 : .... ... ... rl0 : .... ... ... vr0 : ... ... ... I have two network cards (the machine will be a router). I created...

3. Solaris

Is the cable you are using a null modem cable or a modem cable

Hi all, Is there any difference between a null modem cable or a modem cable ? i assume that a null modem cable is a normal cable that i used from cpu serial ports to a modem for dialup. please correct if i am wrong, thks

4. Solaris

How to configure private LAN and coporate LAN on the same machine-Solaris10

Hi , I am trying to configure a private LAN and corporate LAN on the same machien on Solaris 10. How can I achieve this? Thanks

5. AIX

need AIX console cable

Hello ... I am newbie and will be very grateful for any help. I need a serial console cable for my AIX boxes (seems we have lost the one we had!). However I am confused about the one one to order - UK based if possible. I wonder if anyone can point me at a specific one or the exact spec i need to...

6. Solaris

Cable link down

We are unable to ping from Sun Ultra 60 to Ultra 10 machine and vice versa. We are getting an error message Cable Link Down ?. It was working fine. Troubleshooting steps taken. 1) Changed the IPaddresses on both machines 192.168.10.10 and 192.168.10.20. These machines connected through 8 port...

7. IP Networking

Local Lan, no-ip directed DNS forward, surf within lan

Hi, We have a website running on a local centos 5.4 surfer, static IP. The domain.com uses no-ip.com to take care of the DNS, it forwards all to my server. My router receives the port 80 call, routes it to my server and the world can see domain.com perfectly fine. However, we cannot see...

8. UNIX for Dummies Questions & Answers

question on RJ-45 cable

Hi, Quick question on RJ-45 cable. I ran ethernet cable, this cable is about 200 feet long. I only need 100 feet cable, does the extra length going to hurt in terms of speed or signal? Please advise. Thanks.

9. Hardware

Cable for SUN x4200 DC

Hello, I have a spare SUN server X4200 with a DC PSU (oracle part number 300-2186) The PSU is the one in the photo I was looking in the net about what cable i can order but i couldn't find anything that fit there :) Any idea? Thanks!

LEARN ABOUT OPENDARWIN

liebert

LIEBERT(8)							    NUT Manual								LIEBERT(8)

NAME

       liebert - Driver for Liebert contact-closure UPS equipment

NOTE

       This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

       This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their
       contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.

EXTRA ARGUMENTS

       This driver does not support any extra settings in the ups.conf(5).

BUGS

       This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable.
       You may have to build another cable with DTR connected through to the UPS for it to work.

       There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a
       fundamental limitation of any contact-closure driver.

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

Network UPS Tools						    05/21/2012								LIEBERT(8)