i haven't tried this, but please check if fstress is helpful for you
How would i make a script for checking the same.
I have created following script but There seems to be some problem with the script.
Whenever i execute it nothing get displayed.What could be the issue.
If a file size increases in Linux/UNIX to say in GB's then will there be a decrease in write speed.
I mean will it take more time to write to a large file then to a small one??
Please clarify?
Thanks in advance (2 Replies)
I analysed disk performance with blktrace and get some data:
read:
8,3 4 2141 2.882115217 3342 Q R 195732187 + 32
8,3 4 2142 2.882116411 3342 G R 195732187 + 32
8,3 4 2144 2.882117647 3342 I R 195732187 + 32
8,3 4 2145 ... (1 Reply)
Hi,
We have smb client running on two of the linux boxes and smb server on another linux system. During a backup operation which uses smb, read of a file was allowed while write to the same file was going on.Also simultaneous writes to the same file were allowed.Following are the settings in the... (1 Reply)
Would simply like to write data (no audio) to a CD/RW disk. The disk drive states CD/RW on the front but don't know for sure if the software is configured to recognize it as a writable disk. I can read/move data from the disk to the hard drive with no issue from the disk. Any help in this... (4 Replies)
I am now on Kernel 2.6.32-26
For me 16x CD write speed is okay.
I have old hardware which was able to write DVDs at 1x, back in previous linux version.
Now, I dont get speed of less than 4x.
Tested on k3b, xfburn, and brasero. But all start at bottom 4x write speed. k3b forced back to... (0 Replies)
Hi,
I went to a computer store and the salesman sold me a SATA cable and told me that all SATA cables are the same. Another salesman at a different store told me a cable rated for SATA 2, which I bought, MIGHT work as well as one rate for SATA 3 but it is not guaranteed. I decided to run a... (3 Replies)
hi all:
as we know , when usb flash disk plug in and aotu mounted , the default permission of the usb flash disk is 700. that means others have no permission . the question: how to make others have read/write permission when the aotu mounted usb flash disk pluge in ? thanks !! (0 Replies)
Hi,
We have two servers in scenario (vmsoldot01 is Oracle VM with Linux and tldtppod15 is physical Linux server). One NAS share is mounted on both servers with similar permissions and access. But READ speed is too bad on virtual in comparison to physical server.
While trying to diagnose this, I... (2 Replies)
Hello All,
I am building a real time parser for a log file in my application.
The log file is continuously written at a very fast pace and gets rolled over every 10 minutes.
I have measured the speed and observed that around 1000 lines are written to it every second, each line about 30-40... (7 Replies)
Discussion started by: cool.aquarian
7 Replies
LEARN ABOUT OPENSOLARIS
pvck
PVCK(8) System Manager's Manual PVCK(8)NAME
pvck - check physical volume metadata
SYNOPSIS
pvck [-d|--debug] [-h|--help] [-v|--verbose] [--labelsector] PhysicalVolume [PhysicalVolume...]
DESCRIPTION
pvck checks physical volume LVM metadata for consistency.
OPTIONS
See lvm for common options.
--labelsector sector
By default, 4 sectors of PhysicalVolume are scanned for an LVM label, starting at sector 0. This parameter allows you to specify a
different starting sector for the scan and is useful for recovery situations. For example, suppose the partition table is corrupted
or lost on /dev/sda, but you suspect there was an LVM partition at approximately 100 MB. This area of the disk may be scanned by
using the --labelsector parameter with a value of 204800 (100 * 1024 * 1024 / 512 = 204800):
pvck --labelsector 204800 /dev/sda
Note that a script can be used with --labelsector to automate the process of finding LVM labels.
SEE ALSO lvm(8), pvcreate(8), pvscan(8)vgck(8)Sistina Software UK LVM TOOLS 2.02.95(2) (2012-03-06) PVCK(8)