08-12-2010
GNUGK-How to setup static gateway to gateway routing
Dear Sir
I am a newbie in the world of IP telephony. I have been working with Asterisk PBX (SIP) and Cisco Call Manager (MGCP) but now I am learning on how to work GNUGK for H.323 Gatekeeper.
I am having a problem, configuring static call routing on GNUGK
in the section
[RasSrv::GWPrefixes]
Remote1=203.
Remote2=486.
Local-router1 = 0...,1...,01.........,1.......,0......,1......,2...,3...,4...,5...,6...,7...,8...
Local-router2 = 0...,1...,01.........,1.......,0......,1......,2...,3...,4...,5...,6...,7...,8....
You can see that the routers Local-router1 and 2 has the same dialling plan.
What happens is the gatekeeper send calls randomly to one router or to the other when one of the matching extension is dialled.
What I am trying to do is to force
any calls coming from Remote1 to go out only throught Local-router1
Remote1 =========================> Local-router1
and any calls from Remote2 to go out throught Local-router2
Remote2 =========================> Local-router2
please tell me if there is any way of doing that, I have tried many things here and I am out of ressources.
Thank you in advance for your help
Roland
10 More Discussions You Might Find Interesting
1. IP Networking
I used "route" to add the default gateway
I wrote this:
route add default 19x.x.x.x 0
but this is not permanent default gateway.
Do I need to use another command?
Thank a lot (2 Replies)
Discussion started by: lmena
2 Replies
2. Red Hat
Hi,
in which file and how shuold be decalred a gateway and its IP adresse ?
Where and how add a gateway ?
Many thanks before. (3 Replies)
Discussion started by: big123456
3 Replies
3. AIX
Dear folks,
How can delete the gateway from smitty or by command, Because I have 2 gatway in the system and I tried to delete by smitty it gave me failed command (7 Replies)
Discussion started by: magasem
7 Replies
4. IP Networking
Hi all,
I installed Fedora 9 + squid at one of PC at work.
Our company has windows 2003 servera acting as DHCP server.
During installation, i set linux box up as Static IP (192.168.0.100)
But once installation completed, The pc is assigned a different IP address instead of 192.168.0.100.... (3 Replies)
Discussion started by: c00kie88
3 Replies
5. Solaris
I have just installed Solaris 10 X86 today, but I can't use internet at all on it.
When I was installing it, it only asked me to create a hostname, without even asking me this computer is "networked" or "non-networked".
After I finished installation, I use "netstat -rn" command, and only see... (3 Replies)
Discussion started by: Diamondust
3 Replies
6. AIX
Just want to know if someone has a clue about what could be happening here:
I have an AIX box with four NICs in Ether channel connected to a Cisco Switch.
When I try to ping the default gateway, sometimes it works, but sometimes it doesn't work unless it has a defined static route.
Thanks... (1 Reply)
Discussion started by: witt
1 Replies
7. IP Networking
hi folks,
i have a horstbox-router with the following configuration.
it has 4 ethernet ports from wich one (wan0) is configured as an external modem via dhcp. at this port/interface(wan0) it is connected with my home network (other switch).
this configuration results in the following... (14 Replies)
Discussion started by: gencaslan
14 Replies
8. UNIX for Advanced & Expert Users
Hello,
We are migrating our gateways from CentOS 6 to CentOS 7 and for setting up a transparent proxy using squid and Firewalld i am using below configuration.
#Firewalld configurations
firewall-cmd --permanent --zone=public --add-forward-port=port=80:proto=tcp:toport=3128:toaddr=LAN_IP... (4 Replies)
Discussion started by: sunnysthakur
4 Replies
9. Linux
Hello,
Did anyone setup a CentOS7 as a gateway (with squid transparent proxy).
I am trying to do so but not able to setup.
I setup squid , iptables (using it instead of firewalld) and all the necessary IPtables rules but nothing work.
It work previously but access.log of squid not getting... (4 Replies)
Discussion started by: sunnysthakur
4 Replies
10. UNIX for Beginners Questions & Answers
Dear friends
I use RedHat 6.5, which sets the gateway in the configuration file / etc / sysconfig / network as GATEWAY = 192.168.1.26, and the gateway in the configuration file / etc / sysconfig / network-scripts / ifcfg-eth11 as GATEWAY = 192.168.1.256. The two gateways are different.... (6 Replies)
Discussion started by: tanpeng
6 Replies
routes(4) Kernel Interfaces Manual routes(4)
NAME
routes - Specifies Internet routing information to the routing tables
SYNOPSIS
/etc/routes
DESCRIPTION
Static routes can be defined in the /etc/routes file. The /etc/routes file identifies static routes that are automatically added to the
network routing tables with the /usr/sbin/route add command. The /sbin/init.d/route script contains the /usr/sbin/route add command that
is executed for each entry in the /etc/routes file when the network is restarted on the system or the system is rebooted.
The general format of an entry in the /etc/routes file is: Dest Name1 Name2
The following is a brief description of each element in an /etc/routes file entry: A keyword that indicates whether the route is to a net-
work or to a host. The two possible keywords are -net and -host. The name or address of the destination network or host. Name1 can be
either a symbolic name (as used in the /etc/hosts or /etc/networks file) or an Internet address specified in dotted-decimal format. The
name or address of the gateway host to which messages should be forwarded. Name2 can be either a symbolic name (as used in the /etc/hosts
file) or an Internet address specified in dotted-decimal format.
The routes file is a Context-Dependent Symbolic Link (CDSL) and must be maintained as such. See the System Administration manual for more
information.
EXAMPLES
To specify a route to a network through a gateway host with an entry in the /etc/routes file, enter:
-net net2 host4
This example specifies a route to a network, net2, through the gateway host4. To specify a route to a host through a gateway host
with an entry in the /etc/routes file, enter:
-host host2 host4
This example specifies a route to a host, host2, through the gateway host4. To specify a route to a default gateway host with an
entry in the /etc/routes file, enter:
default 130.9.0.5
This example specifies a route to a default gateway with an Internet address of 130.9.0.5.
FILES
Contains the /usr/sbin/routed add command.
RELATED INFORMATION
Commands: route(8)
Daemons: gated(8), routed(8)
Files: gated.conf(4)
Network Administration delim off
routes(4)