|
|
Sponsored Content
Operating Systems
Solaris
Cannot see the IBM SAN storage
Post 302442701 by achenle on Thursday 5th of August 2010 06:30:58 AM
08-05-2010
|
|
9 More Discussions You Might Find Interesting
1. AIX
To summarize the problem: The "IBM FastT Storage Manager Client v8" shows that our Disk Farm is arranged into 6 logical drives each in a RAID 5 configuration. This software also shows that 5 of the 6 logical drives (from Disk Farm) are in a error state: "Failed Logical Drive - Drive Failure".... (1 Reply)
Discussion started by: aix-olympics
1 Replies
2. AIX
Hello,
Does anyone know how to copy SAN Storage logical disks from IBM TotalStorage Software.
I have a SAN Logical Disk of 200GB mounted on my AIX LPAR_1 via fibre channel fcs0
I would like to make an exact copy of the SAN Logical Disk from IBM totalStorage and mount it on AIX LPAR_2
... (4 Replies)
Discussion started by: filosophizer
4 Replies
3. AIX
Hello,
I have AIX 6.1 with TL 4 and it is connected to IBM SAN STORAGE DS4700
After assigning some disks from SAN to AIX, I can see the disks in my AIX as
hdisk2 Available 05-00-02 MPIO Other DS4K Array Disk
hdisk3 Available 05-00-02 MPIO Other DS4K Array Disk
But it should... (0 Replies)
Discussion started by: filosophizer
0 Replies
4. UNIX for Dummies Questions & Answers
hi guys
I installed Centos 5.5 (local disk). I am using 2 HBAs
Now I mapped 5 LUNs from a Storage.
I will be using LVM
just to test I assigned a LUN I've read I have to use multipath to avoid my Centos see the LUN twice
I enabled mdmpd and multipathd...
something else I should do?
... (8 Replies)
Discussion started by: kopper
8 Replies
5. AIX
Hello,
I have IBM SAN STORAGE DS4100 and one of the cache battery for the controller is dead. Suddenly the performance has been degraded and access to SAN disks ( reading and writing ) became very slow ?
My query: Replacing the battery will take 6 days, so in the mean time what are the ways... (1 Reply)
Discussion started by: filosophizer
1 Replies
6. AIX
Can anyone recommend a good book on san storage basics and how it communicates with an AIX server? (1 Reply)
Discussion started by: NycUnxer
1 Replies
7. AIX
Hello,
I have DS4000 IBM SAN Storage ( aka FastT Storage )
One of my disks has failed and I had a hot spare disk covering all the arrays. As the disk failed, immediately the hotspare disk took over the failed disk ( see the JPEG in the attachment )
My Question: How can I make the hotspare... (1 Reply)
Discussion started by: filosophizer
1 Replies
8. AIX
Has anyone tried SAN to SAN mirroring on IBM DS SAN Storage.
DS5020 mentions Enhanced Remote Mirror to multi-LUN applications
I wonder if Oracle High availibility can be setup using Remote Mirror option of SAN ? (1 Reply)
Discussion started by: filosophizer
1 Replies
9. AIX
Hi,
This is follow up to the post https://www.unix.com/aix/233361-san-disk-appearing-double-aix.html
When I connected Pseries Machine HBA Card ( Dual Port ) directly to the SAN Storage DS4300 , I was able to see Host Port Adapter WWN numbers , although I was getting this message... (2 Replies)
Discussion started by: filosophizer
2 Replies
LEARN ABOUT CENTOS
reboot
HALT(8) halt HALT(8) NAME
halt, poweroff, reboot - Halt, power-off or reboot the machine SYNOPSIS
halt [OPTIONS...] poweroff [OPTIONS...] reboot [OPTIONS...] DESCRIPTION
halt, poweroff, reboot may be used to halt, power-off or reboot the machine. OPTIONS
The following options are understood: --help Prints a short help text and exits. --halt Halt the machine, regardless of which one of the three commands is invoked. -p, --poweroff Power-off the machine, regardless of which one of the three commands is invoked. --reboot Reboot the machine, regardless of which one of the three commands is invoked. -f, --force Force immediate halt, power-off, reboot. Do not contact the init system. -w, --wtmp-only Only write wtmp shutdown entry, do not actually halt, power-off, reboot. -d, --no-wtmp Do not write wtmp shutdown entry. --no-wall Do not send wall message before halt, power-off, reboot. EXIT STATUS
On success, 0 is returned, a non-zero failure code otherwise. NOTES
These are legacy commands available for compatibility only. SEE ALSO
systemd(1), systemctl(1), shutdown(8), wall(1) systemd 208 HALT(8)