To summarize the problem: The "IBM FastT Storage Manager Client v8" shows that our Disk Farm is arranged into 6 logical drives each in a RAID 5 configuration. This software also shows that 5 of the 6 logical drives (from Disk Farm) are in a error state: "Failed Logical Drive - Drive Failure".... (1 Reply)
Hello,
Does anyone know how to copy SAN Storage logical disks from IBM TotalStorage Software.
I have a SAN Logical Disk of 200GB mounted on my AIX LPAR_1 via fibre channel fcs0
I would like to make an exact copy of the SAN Logical Disk from IBM totalStorage and mount it on AIX LPAR_2
... (4 Replies)
Hello,
I have AIX 6.1 with TL 4 and it is connected to IBM SAN STORAGE DS4700
After assigning some disks from SAN to AIX, I can see the disks in my AIX as
hdisk2 Available 05-00-02 MPIO Other DS4K Array Disk
hdisk3 Available 05-00-02 MPIO Other DS4K Array Disk
But it should... (0 Replies)
hi guys
I installed Centos 5.5 (local disk). I am using 2 HBAs
Now I mapped 5 LUNs from a Storage.
I will be using LVM
just to test I assigned a LUN I've read I have to use multipath to avoid my Centos see the LUN twice
I enabled mdmpd and multipathd...
something else I should do?
... (8 Replies)
Hello,
I have IBM SAN STORAGE DS4100 and one of the cache battery for the controller is dead. Suddenly the performance has been degraded and access to SAN disks ( reading and writing ) became very slow ?
My query: Replacing the battery will take 6 days, so in the mean time what are the ways... (1 Reply)
Hello,
I have DS4000 IBM SAN Storage ( aka FastT Storage )
One of my disks has failed and I had a hot spare disk covering all the arrays. As the disk failed, immediately the hotspare disk took over the failed disk ( see the JPEG in the attachment )
My Question: How can I make the hotspare... (1 Reply)
Has anyone tried SAN to SAN mirroring on IBM DS SAN Storage.
DS5020 mentions Enhanced Remote Mirror to multi-LUN applications
I wonder if Oracle High availibility can be setup using Remote Mirror option of SAN ? (1 Reply)
Hi,
This is follow up to the post https://www.unix.com/aix/233361-san-disk-appearing-double-aix.html
When I connected Pseries Machine HBA Card ( Dual Port ) directly to the SAN Storage DS4300 , I was able to see Host Port Adapter WWN numbers , although I was getting this message... (2 Replies)
Discussion started by: filosophizer
2 Replies
LEARN ABOUT ULTRIX
reboot
reboot(8) System Manager's Manual reboot(8)Name
reboot - automatic reboot procedures
Syntax
/etc/reboot [ -n ] [ -q ]
Description
The ULTRIX system is booted by loading a kernel image, usually into memory at location zero and transferring to zero. Because the system
is not reenterable, the kernel image must be read in from disk each time the system is bootstrapped.
When the reboot of a running system is desired, is normally used. If there are no users, can be used. The command causes the disks to be
synced, and then a multiuser reboot is initiated. The system is booted and an automatic disk check is performed. If the procedure suc-
ceeds, the system is then brought up for the users.
The system will reboot itself after a power failure or after a crash, provided auto-restart is enabled on your system. A consistency check
of the file systems will be performed and, unless the check fails, the system will resume multiuser operations.
Options-n Prevents the disks from being synced.
-q Reboots quickly and ungracefully, without shutting down running processes first.
Files
System code
See Alsocrash(8v), fsck(8), halt(8), init(8), newfs(8), rc(8), shutdown(8)reboot(8)