08-05-2010
Cannot see the IBM SAN storage
HI all,
I had recently change the Server storage from EMC to the IBM SAN.
but after the configuration, the IBM success to see the server HBA port and successfully assign a LUN for the server.
When i go to the server, and restarted it. i use the "format" command to check, but din see any IBM SAN.
is it anyway i still need to configure in my server?
kindly advise =)
Thanks
---------- Post updated at 12:02 PM ---------- Previous update was at 11:21 AM ----------
i think the following step, solve my problem
devfsadm -Cv
Quote:
Originally Posted by
kingston
In my case, i have a IBM ESS Shark 800 storage and have multi os clients solaris 5.8 and 5.10 and RHEL 5. There is host attached with the storage and it has a graphical utility to create lun after adding new hard disks. Once the lun is created then i need to assign the lun to the host which has the WWPN ( not WWNN ) ip address, hostname. Then from solaris if i gave "devfsadm -Cv" i could see the lun.
This is what the procedure i follow in my site. It will vary with respect to the vendor. But i hope i may give a idea about assigning a lun to the client.
How configure SAN to server?
9 More Discussions You Might Find Interesting
1. AIX
To summarize the problem: The "IBM FastT Storage Manager Client v8" shows that our Disk Farm is arranged into 6 logical drives each in a RAID 5 configuration. This software also shows that 5 of the 6 logical drives (from Disk Farm) are in a error state: "Failed Logical Drive - Drive Failure".... (1 Reply)
Discussion started by: aix-olympics
1 Replies
2. AIX
Hello,
Does anyone know how to copy SAN Storage logical disks from IBM TotalStorage Software.
I have a SAN Logical Disk of 200GB mounted on my AIX LPAR_1 via fibre channel fcs0
I would like to make an exact copy of the SAN Logical Disk from IBM totalStorage and mount it on AIX LPAR_2
... (4 Replies)
Discussion started by: filosophizer
4 Replies
3. AIX
Hello,
I have AIX 6.1 with TL 4 and it is connected to IBM SAN STORAGE DS4700
After assigning some disks from SAN to AIX, I can see the disks in my AIX as
hdisk2 Available 05-00-02 MPIO Other DS4K Array Disk
hdisk3 Available 05-00-02 MPIO Other DS4K Array Disk
But it should... (0 Replies)
Discussion started by: filosophizer
0 Replies
4. UNIX for Dummies Questions & Answers
hi guys
I installed Centos 5.5 (local disk). I am using 2 HBAs
Now I mapped 5 LUNs from a Storage.
I will be using LVM
just to test I assigned a LUN I've read I have to use multipath to avoid my Centos see the LUN twice
I enabled mdmpd and multipathd...
something else I should do?
... (8 Replies)
Discussion started by: kopper
8 Replies
5. AIX
Hello,
I have IBM SAN STORAGE DS4100 and one of the cache battery for the controller is dead. Suddenly the performance has been degraded and access to SAN disks ( reading and writing ) became very slow ?
My query: Replacing the battery will take 6 days, so in the mean time what are the ways... (1 Reply)
Discussion started by: filosophizer
1 Replies
6. AIX
Can anyone recommend a good book on san storage basics and how it communicates with an AIX server? (1 Reply)
Discussion started by: NycUnxer
1 Replies
7. AIX
Hello,
I have DS4000 IBM SAN Storage ( aka FastT Storage )
One of my disks has failed and I had a hot spare disk covering all the arrays. As the disk failed, immediately the hotspare disk took over the failed disk ( see the JPEG in the attachment )
My Question: How can I make the hotspare... (1 Reply)
Discussion started by: filosophizer
1 Replies
8. AIX
Has anyone tried SAN to SAN mirroring on IBM DS SAN Storage.
DS5020 mentions Enhanced Remote Mirror to multi-LUN applications
I wonder if Oracle High availibility can be setup using Remote Mirror option of SAN ? (1 Reply)
Discussion started by: filosophizer
1 Replies
9. AIX
Hi,
This is follow up to the post https://www.unix.com/aix/233361-san-disk-appearing-double-aix.html
When I connected Pseries Machine HBA Card ( Dual Port ) directly to the SAN Storage DS4300 , I was able to see Host Port Adapter WWN numbers , although I was getting this message... (2 Replies)
Discussion started by: filosophizer
2 Replies
hbaapi(3C) hbaapi(3C)
NAME
hbaapi - Fibre Channel Storage Network Industry Association Host Bus Adapter Application Programming Interface (FC SNIA HBA API)
DESCRIPTION
The Common HBA API provides a consistent HBA standard interface for accessing information in a Fibre Channel Storage Area Network (SAN)
that would be implemented across vendors as a standard 'C' API supported by vendor specific library instances.
This API library is thread-safe, but threads should not be cancelled when execution is in the API.
The following functions are available in the API for managing a Fibre Channel HBA. This API would be exposed to upper level applications
to control SAN functionality.
Please refer to for details on structures used.
01.
02.
03.
04.
05.
06.
07.
08.
09.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
FCP Information Functions require that the applications calling them
have an effective user id as that of the root user (euid = 0).
20.
21.
22.
SCSI Information Functions require that the applications calling them have an effective user id as that of the root user (euid = 0).
23.
24.
FILES
Contains the related data structures and definitions as in
AUTHOR
These APIs were developed by Hewlett-Packard Company.
SEE ALSO
HBA_GetVersion(3C), HBA_LoadLibrary(3C), HBA_FreeLibrary(3C), HBA_GetNumberOfAdapters(3C), HBA_GetAdapterName(3C), HBA_OpenAdapter(3C),
HBA_CloseAdapter(3C), HBA_GetAdapterAttributes(3C), HBA_GetAdapterPortAttributes(3C), HBA_GetPortStatistics(3C), HBA_GetDiscoveredPortAt-
tributes(3C), HBA_GetPortAttributesByWWN(3C), HBA_SendCTPassThru(3C), HBA_GetEventBuffer(3C), HBA_SetRNIDMgmtInfo(3C), HBA_GetRNIDMgmt-
Info(3C), HBA_SendRNID(3C), HBA_GetFcpTargetMapping(3C), HBA_GetFcpPersistentBinding(3C), HBA_SendScsiInquiry(3C), HBA_SendReportLUNs(3C),
HBA_SendReadCapacity(3C), HBA_RefreshInformation(3C), HBA_ResetStatistics(3C).
hbaapi(3C)