Sponsored Content
Operating Systems Solaris NIS slave unable to copy the data bases Post 302442171 by jld on Tuesday 3rd of August 2010 12:39:35 PM
Old 08-03-2010
Solved it my self.

What i've done is.

I thought that the problem resided in the fact that the primary interface was het interface on which dhcp was running. That explains when I pinged ik got the dhcp outside adress e1000g1 and not the static inside adress e1000g0.
So I wanted to change this and edited the hosts file to match the inside ip with the inside interface also changed the hostname.e1000g0 with the hostname of the master, this was previous just an ip configured in that file.

rebooted.

That still didnt work. the primary interface was still the dhcp address and it kept overruling my static ip in the hosts file.

I put this in
Code:
#
# Internet host table
#
::1     localhost
127.0.0.1       localhost
192.168.1.5     solaris101
192.168.1.7     solaris103      loghost
192.168.1.6    solaris102

but the result after a reboot was:

Code:
#
# Internet host table
#
::1     localhost
127.0.0.1       localhost
192.168.1.5     solaris101
192.168.1.7     solaris103      loghost
192.168.2.10    solaris102      # Added by DHCP

So I struggeld a bit with that but finally I thought

Code:
sys-unconfig

will do the trick. rebooted and configured all a new setting the primary interface to e1000g0 the static ip.
Also made the dhcp a static ip and the hosts file now looks like this.

Code:
bash-3.00# cat /etc/hosts
#
# Internet host table
#
127.0.0.1       localhost
::1     localhost
192.168.1.6     solaris102
192.168.2.10    solaris102-1
192.168.1.5     solaris101
192.168.1.7     solaris103

Notice I made a different name for the e1000g1 interface, think that is commonly used like this.

After all configurations.

Code:
ypinit -s solaris102

Worked fine and the slave could contact the NIS master server.
 

9 More Discussions You Might Find Interesting

1. Solaris

Unable to Log In to Sun NIS server

Greetings, I have recently inherited 3 sun servers from a shop that my parent company closed. One of these servers is an old Ultra 1 running SunOS 5.6 that acts as a NIS server for the other two servers. This NIS server seems to boot OK and function properly as a NIS server. However, I can't... (6 Replies)
Discussion started by: SevenFortyOne
6 Replies

2. UNIX for Advanced & Expert Users

NIS master / slave problems

Our NIS master server went down. We have since fixed it and brought it back up. However all of are machines still point to the slave server when looking at it with ypwhich. My question is how do i point the servers back to the master. Frank (2 Replies)
Discussion started by: frankkahle
2 Replies

3. UNIX for Advanced & Expert Users

Automount on NIS slave

I am setting up the NIS slave server to automount the home directory just like its master server on suse linux (SLES 10). Since the master will be the first to mount the /home on the client. I have not been able to mount the /home on the on the slave when the master NIS server is unavailable. How... (0 Replies)
Discussion started by: ibroxy
0 Replies

4. SuSE

Automount on NIS slave

I am setting up the NIS slave server to automount the home directory just like its master server on suse linux (SLES 10). Since the master will be the first to mount the /home on the client. I have not been able to mount the /home on the on the slave when the master NIS server is unavailable.... (1 Reply)
Discussion started by: ibroxy
1 Replies

5. AIX

Slave NIS server configuration change

Hello Everybody, I have a question regarding SLAVE NIS SERVER in aix. We are using NIS master of Sun Solaris 9.0 which is on different subnet i.e. 10.197.93.0. And Our slave server is having AIX 5.3 installed which is on 10.207.13.0 subnet. I have a query regarding its name and ip address... (0 Replies)
Discussion started by: jit15975
0 Replies

6. Solaris

How to bind from a NIS slave server

Hi All, I have a client already binded with a NIS master server. Now, I want to bind this particular client to one of NIS slave. How to do it? Thanks, Deepak (2 Replies)
Discussion started by: naw_deepak
2 Replies

7. UNIX for Advanced & Expert Users

NIS setup: Mastr on AIX and slave on Solaris?

Hello - This could be a stupid question. But can we configure NIS with different flavors of UNIX. Like Master on AIX and slave on Solaris? ---------- Post updated 09-06-11 at 04:17 AM ---------- Previous update was 09-05-11 at 06:34 AM ---------- Hi - Can anyone please answer this? (1 Reply)
Discussion started by: manju--
1 Replies

8. Shell Programming and Scripting

unable to configure NIS client server

Dear all, I am using solaris 10 OS. I configured NIS server and i also configured NIS client server but when i use the command ypinit -s sunserv1 in NIS client it is showing me the below error. Enumerates maps from sunserv1. please check that it is running. (2 Replies)
Discussion started by: bhargav90
2 Replies

9. Solaris

Testing NIS slave server

Hi guys, In my Sol-10 i setup NIS server following the oracle doc and setup a Linux as NIS client all went ok. I added another Sol-10 and configure it as a NIS slave server following the oracle doc again. and added the server on the yp.conf on my NIS client How do i test if my NIS slave... (3 Replies)
Discussion started by: batas
3 Replies
HOSTS(5)                                                     Linux Programmer's Manual                                                    HOSTS(5)

NAME
hosts - static table lookup for hostnames SYNOPSIS
/etc/hosts DESCRIPTION
This manual page describes the format of the /etc/hosts file. This file is a simple text file that associates IP addresses with hostnames, one line per IP address. For each host a single line should be present with the following information: IP_address canonical_hostname [aliases...] Fields of the entry are separated by any number of blanks and/or tab characters. Text from a "#" character until the end of the line is a comment, and is ignored. Host names may contain only alphanumeric characters, minus signs ("-"), and periods ("."). They must begin with an alphabetic character and end with an alphanumeric character. Optional aliases provide for name changes, alternate spellings, shorter hostnames, or generic hostnames (for example, localhost). The Berkeley Internet Name Domain (BIND) Server implements the Internet name server for UNIX systems. It augments or replaces the /etc/hosts file or hostname lookup, and frees a host from relying on /etc/hosts being up to date and complete. In modern systems, even though the host table has been superseded by DNS, it is still widely used for: bootstrapping Most systems have a small host table containing the name and address information for important hosts on the local network. This is useful when DNS is not running, for example during system bootup. NIS Sites that use NIS use the host table as input to the NIS host database. Even though NIS can be used with DNS, most NIS sites still use the host table with an entry for all local hosts as a backup. isolated nodes Very small sites that are isolated from the network use the host table instead of DNS. If the local information rarely changes, and the network is not connected to the Internet, DNS offers little advantage. FILES
/etc/hosts NOTES
Modifications to this file normally take effect immediately, except in cases where the file is cached by applications. Historical notes RFC 952 gave the original format for the host table, though it has since changed. Before the advent of DNS, the host table was the only way of resolving hostnames on the fledgling Internet. Indeed, this file could be created from the official host data base maintained at the Network Information Control Center (NIC), though local changes were often required to bring it up to date regarding unofficial aliases and/or unknown hosts. The NIC no longer maintains the hosts.txt files, though looking around at the time of writing (circa 2000), there are historical hosts.txt files on the WWW. I just found three, from 92, 94, and 95. EXAMPLE
# The following lines are desirable for IPv4 capable hosts 127.0.0.1 localhost # 127.0.1.1 is often used for the FQDN of the machine 127.0.1.1 thishost.mydomain.org thishost 192.168.1.10 foo.mydomain.org foo 192.168.1.13 bar.mydomain.org bar 146.82.138.7 master.debian.org master 209.237.226.90 www.opensource.org # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback ff02::1 ip6-allnodes ff02::2 ip6-allrouters SEE ALSO
hostname(1), resolver(3), host.conf(5), resolv.conf(5), resolver(5), hostname(7), named(8) Internet RFC 952 COLOPHON
This page is part of release 4.15 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man-pages/. Linux 2017-09-15 HOSTS(5)
All times are GMT -4. The time now is 03:01 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy